On Tue, 2018-05-08 at 16:14 +0200, Jan Luebbe wrote: > The IPU can only capture RGB565 with two 8-bit cycles in bayer/generic > mode on the parallel bus, compared to a specific mode on MIPI CSI-2. > To handle this, we extend imx_media_pixfmt with a cycles per pixel > field, which is used for generic formats on the parallel bus. > > Before actually adding RGB565_2X8 support for the parallel bus, this > series simplifies handing of the the different configurations for RGB565 > between parallel and MIPI CSI-2 in imx-media-capture. This avoids having > to explicitly pass on the format in the second patch. > > Changes since v1: > - fixed problems reported the kbuild test robot > - added helper functions as suggested by Steve Longerbeam > (is_parallel_bus and requires_passthrough) > - removed passthough format check in csi_link_validate() (suggested by > Philipp Zabel during internal review) The theory is that IC only supports AYUV8_1X32 and RGB888_1X24 input, and any passthrough format on the CSI sink will differ from those. Mismatching formats are already caught by v4l2_subdev_link_validate called on the ipu?_vdic or ipu?_ic_prp entities' sink pads. regards Philipp
