Hi, This patch series adds CEC support to the DRM TDA998x driver. The TDA998x family of devices integrate a TDA9950 CEC at a separate I2C address from the HDMI encoder. Implementation of the CEC part is separate to allow independent CEC implementations, or independent HDMI implementations (since the TDA9950 may be a separate device.) .../devicetree/bindings/display/bridge/tda998x.txt | 3 + drivers/gpu/drm/i2c/Kconfig | 6 + drivers/gpu/drm/i2c/Makefile | 1 + drivers/gpu/drm/i2c/tda9950.c | 509 +++++++++++++++++++++ drivers/gpu/drm/i2c/tda998x_drv.c | 242 ++++++++-- include/linux/platform_data/tda9950.h | 16 + 6 files changed, 750 insertions(+), 27 deletions(-) create mode 100644 drivers/gpu/drm/i2c/tda9950.c create mode 100644 include/linux/platform_data/tda9950.h v3: addressed most of Hans comments in v2 v2: updated DT property. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up According to speedtest.net: 8.21Mbps down 510kbps up
