On Thu, Apr 5, 2018 at 4:36 PM, Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> wrote:
> Hi Ibtsam,
>
> On Thu, 2018-04-05 at 16:24 +0200, Ibtsam Ul-Haq wrote:
>> Hi Fabio,
>>
>> Thanks for your reply.
>>
>> On Thu, Apr 5, 2018 at 3:31 PM, Fabio Estevam <festevam@xxxxxxxxx> wrote:
>> > Hi Ibtsam,
>> >
>> > [Adding Steve and Philipp in case they can provide some suggestions]
>> >
>> > On Thu, Apr 5, 2018 at 9:30 AM, Ibtsam Ul-Haq <ibtsam.haq.0x01@xxxxxxxxx> wrote:
>> > > Greetings everyone,
>> > >
>> > > I'm running Linux 4.14.31 on an IMX6 QuadPlus based Phytec board
>> > > (PCM-058). I have connected an mt9p031 sensor to ipu1_csi0. The
>> > > problem is that I am not seeing the /dev/media0 node.
>> >
>> > Can you share your dts?
>> >
>>
>> Certainly. The dts provided by the board manufacturer was meant to
>> work with their own kernel, I tried to modify it to work with the
>> mainline kernel.
>>
>> The sensor related nodes are:
>>
> [...]
>> mt9p031_1: cam1@5d {
>> compatible = "aptina,mt9p031";
>> reg = <0x5d>;
>> status = "okay";
> [...]
>> I intend to use two cameras simultaneously. In my current setup
>> however only one camera is physically connected.
>
> Try disabling this camera as long as it is not present, otherwise the
> imx-media driver will wait forever for it to appear before creating
> /dev/media0.
>
That worked like a charm! Thanks a lot guys, I would have never thought of that!
> regards
> Philipp
Best regards,
Ibtsam Haq
