Hi Ibtsam, On Thu, 2018-04-05 at 16:24 +0200, Ibtsam Ul-Haq wrote: > Hi Fabio, > > Thanks for your reply. > > On Thu, Apr 5, 2018 at 3:31 PM, Fabio Estevam <festevam@xxxxxxxxx> wrote: > > Hi Ibtsam, > > > > [Adding Steve and Philipp in case they can provide some suggestions] > > > > On Thu, Apr 5, 2018 at 9:30 AM, Ibtsam Ul-Haq <ibtsam.haq.0x01@xxxxxxxxx> wrote: > > > Greetings everyone, > > > > > > I'm running Linux 4.14.31 on an IMX6 QuadPlus based Phytec board > > > (PCM-058). I have connected an mt9p031 sensor to ipu1_csi0. The > > > problem is that I am not seeing the /dev/media0 node. > > > > Can you share your dts? > > > > Certainly. The dts provided by the board manufacturer was meant to > work with their own kernel, I tried to modify it to work with the > mainline kernel. > > The sensor related nodes are: > [...] > mt9p031_1: cam1@5d { > compatible = "aptina,mt9p031"; > reg = <0x5d>; > status = "okay"; [...] > I intend to use two cameras simultaneously. In my current setup > however only one camera is physically connected. Try disabling this camera as long as it is not present, otherwise the imx-media driver will wait forever for it to appear before creating /dev/media0. regards Philipp