Hi All, I am trying to configure a Winfast PxDVR3200 H on Ubuntu 9.10 (Karmic). Although the card seems to be detected, there is no signal when I try to scan for channels either using scan or a variety of software interfaces (me tv, kaffeine, myth tv). All give a signal strength of 0. Any help at all would be appreciated, is there something simple I am missing. Details follow. I have installed v4l-dvb and obtained and extracted the designated firmware (http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#How_to_Obtain_the_Firmware). I manually selected the card type (12) via insmod, resulting in the card being detected and /dev/dvb/ having a adapter0 present. dmesg: [ 14.984019] cx23885 driver version 0.0.2 loaded [ 14.984409] cx23885 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 14.984498] CORE cx23885[0]: subsystem: 107d:6f39, board: Leadtek Winfast PxDVR3200 H [card=12,insmod option] [ 15.231871] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 15.231875] Disabling lock debugging due to kernel taint [ 15.245281] [fglrx] Maximum main memory to use for locked dma buffers: 3799 MBytes. [ 15.245483] [fglrx] vendor: 1002 device: 9442 count: 1 [ 15.245855] [fglrx] ioport: bar 4, base 0xa000, size: 0x100 [ 15.245867] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.245871] pci 0000:01:00.0: setting latency timer to 64Hi All, I am trying to configure a Winfast PxDVR3200 H on Ubuntu 9.10 (Karmic). Although the card seems to be detected, there is no signal when I try to scan for channels either using scan or a variety of software interfaces (me tv, kaffeine, myth tv). All give a signal strength of 0. Any help at all would be appreciated, is there something simple I am missing. Details follow. I have installed v4l-dvb and obtained and extracted the designated firmware (http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#How_to_Obtain_the_Firmware). I manually selected the card type (12) via insmod, resulting in the card being detected and /dev/dvb/ having a adapter0 present. dmesg: [ 14.984019] cx23885 driver version 0.0.2 loaded [ 14.984409] cx23885 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 14.984498] CORE cx23885[0]: subsystem: 107d:6f39, board: Leadtek Winfast PxDVR3200 H [card=12,insmod option] [ 15.231871] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 15.231875] Disabling lock debugging due to kernel taint [ 15.245281] [fglrx] Maximum main memory to use for locked dma buffers: 3799 MBytes. [ 15.245483] [fglrx] vendor: 1002 device: 9442 count: 1 [ 15.245855] [fglrx] ioport: bar 4, base 0xa000, size: 0x100 [ 15.245867] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.245871] pci 0000:01:00.0: setting latency timer to 64 [ 15.246071] [fglrx] Kernel PAT support is enabled [ 15.246090] [fglrx] module loaded - fglrx 8.66.10 [Sep 3 2009] with 1 minors [ 15.251862] cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) [ 15.256893] cx25840 2-0044: firmware: requesting v4l-cx23885-avcore-01.fw [ 15.319795] lp: driver loaded but no devices found [ 15.668482] alloc irq_desc for 22 on node 0 [ 15.668485] alloc kstat_irqs on node 0 [ 15.668490] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 15.668549] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.171154] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 16.177442] cx23885_dvb_register() allocating 1 frontend(s) [ 16.177445] cx23885[0]: cx23885 based dvb card [ 16.345371] hda_codec: Unknown model for ALC889A, trying auto-probe from BIOS... [ 16.345540] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 16.349123] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 16.349163] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 16.464242] xc2028 1-0061: creating new instance [ 16.464245] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 16.464249] DVB: registering new adapter (cx23885[0]) [ 16.464252] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 16.464462] cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 16.464469] cx23885[0]/0: found at 0000:03:00.0, rev: 3, irq: 17, latency: 0, mmio: 0xe8000000 [ 16.464476] cx23885 0000:03:00.0: setting latency timer to 64 lsmod: cx23885 135144 0 cx2341x 15108 1 cx23885 v4l2_common 20512 3 cx25840,cx23885,cx2341x videodev 43552 3 cx25840,cx23885,v4l2_common v4l1_compat 16644 1 videodev v4l2_compat_ioctl32 12416 1 videodev videobuf_dma_sg 14372 1 cx23885 videobuf_dvb 8452 1 cx23885 dvb_core 107700 2 cx23885,videobuf_dvb videobuf_core 20964 3 cx23885,videobuf_dma_sg,videobuf_dvb ir_common 51396 1 cx23885 btcx_risc 5672 1 cx23885 tveeprom 14884 1 cx23885 ls -al /dev/dvb/adapter0/ total 0 drwxr-xr-x 2 root root 120 2009-11-29 21:49 . drwxr-xr-x 3 root root 60 2009-11-29 21:49 .. crw-rw----+ 1 root video 212, 1 2009-11-29 21:49 demux0 crw-rw----+ 1 root video 212, 2 2009-11-29 21:49 dvr0 crw-rw----+ 1 root video 212, 0 2009-11-29 21:49 frontend0 crw-rw----+ 1 root video 212, 3 2009-11-29 21:49 net0 however when I try to scan, I get the following output: scanning /usr/share/dvb/dvb-t/au-Melbourne using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 226500000 1 3 9 3 1 1 0 initial transponder 177500000 1 3 9 3 1 1 0 initial transponder 191625000 1 3 9 3 1 1 0 initial transponder 219500000 1 3 9 3 1 1 0 initial transponder 536625000 1 2 9 3 1 2 0 >>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 177500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 177500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 219500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 219500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. Notably, the following output is found (multiple times) in dmesg after scanning: [ 523.621853] cx23885 0000:03:00.0: firmware: requesting xc3028-v27.fw [ 523.638284] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 523.838414] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [ 524.474232] xc2028 1-0061: i2c output error: rc = -5 (should be 64) [ 524.481383] xc2028 1-0061: -5 returned from send [ 524.481387] xc2028 1-0061: Error -22 while loading base firmware Anyway, anyhelp would be appreciated, I feel as though I am close. Cheers John [ 15.246071] [fglrx] Kernel PAT support is enabled [ 15.246090] [fglrx] module loaded - fglrx 8.66.10 [Sep 3 2009] with 1 minors [ 15.251862] cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) [ 15.256893] cx25840 2-0044: firmware: requesting v4l-cx23885-avcore-01.fw [ 15.319795] lp: driver loaded but no devices found [ 15.668482] alloc irq_desc for 22 on node 0 [ 15.668485] alloc kstat_irqs on node 0 [ 15.668490] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 15.668549] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.171154] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 16.177442] cx23885_dvb_register() allocating 1 frontend(s) [ 16.177445] cx23885[0]: cx23885 based dvb card [ 16.345371] hda_codec: Unknown model for ALC889A, trying auto-probe from BIOS... [ 16.345540] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 16.349123] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 16.349163] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 16.464242] xc2028 1-0061: creating new instance [ 16.464245] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 16.464249] DVB: registering new adapter (cx23885[0]) [ 16.464252] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 16.464462] cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 16.464469] cx23885[0]/0: found at 0000:03:00.0, rev: 3, irq: 17, latency: 0, mmio: 0xe8000000 [ 16.464476] cx23885 0000:03:00.0: setting latency timer to 64 lsmod: cx23885 135144 0 cx2341x 15108 1 cx23885 v4l2_common 20512 3 cx25840,cx23885,cx2341x videodev 43552 3 cx25840,cx23885,v4l2_common v4l1_compat 16644 1 videodev v4l2_compat_ioctl32 12416 1 videodev videobuf_dma_sg 14372 1 cx23885 videobuf_dvb 8452 1 cx23885 dvb_core 107700 2 cx23885,videobuf_dvb videobuf_core 20964 3 cx23885,videobuf_dma_sg,videobuf_dvb ir_common 51396 1 cx23885 btcx_risc 5672 1 cx23885 tveeprom 14884 1 cx23885 ls -al /dev/dvb/adapter0/ total 0 drwxr-xr-x 2 root root 120 2009-11-29 21:49 . drwxr-xr-x 3 root root 60 2009-11-29 21:49 .. crw-rw----+ 1 root video 212, 1 2009-11-29 21:49 demux0 crw-rw----+ 1 root video 212, 2 2009-11-29 21:49 dvr0 crw-rw----+ 1 root video 212, 0 2009-11-29 21:49 frontend0 crw-rw----+ 1 root video 212, 3 2009-11-29 21:49 net0 however when I try to scan, I get the following output: scanning /usr/share/dvb/dvb-t/au-Melbourne using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 226500000 1 3 9 3 1 1 0 initial transponder 177500000 1 3 9 3 1 1 0 initial transponder 191625000 1 3 9 3 1 1 0 initial transponder 219500000 1 3 9 3 1 1 0 initial transponder 536625000 1 2 9 3 1 2 0 >>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 177500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 177500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 219500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 219500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. Notably, the following output is found (multiple times) in dmesg after scanning: [ 523.621853] cx23885 0000:03:00.0: firmware: requesting xc3028-v27.fw [ 523.638284] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 523.838414] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [ 524.474232] xc2028 1-0061: i2c output error: rc = -5 (should be 64) [ 524.481383] xc2028 1-0061: -5 returned from send [ 524.481387] xc2028 1-0061: Error -22 while loading base firmware Anyway, anyhelp would be appreciated, I feel as though I am close. Cheers John -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
