The mt9m111 driver requires clocks property for the master clock to the
sensor, but there is no description for that. This adds it.
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
---
Documentation/devicetree/bindings/media/i2c/mt9m111.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
index ed5a334..ffb57d1 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
+++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
@@ -6,6 +6,8 @@ interface.
Required Properties:
- compatible: value should be "micron,mt9m111"
+- clocks: reference to the master clock.
+- clock-names: should be "mclk".
For further reading on port node refer to
Documentation/devicetree/bindings/media/video-interfaces.txt.
@@ -16,6 +18,8 @@ Example:
mt9m111@5d {
compatible = "micron,mt9m111";
reg = <0x5d>;
+ clocks = <&mclk>;
+ clock-names = "mclk";
remote = <&pxa_camera>;
port {
--
2.7.4
