Hi, I've got a MSI VOX USB2.0 Video grabber (analog TV in, USB framegrabber out) which is partially detected with Linux 2.6.31-11-generic (Ubuntu version). The logs suggest that I E-mail the output of the logs to here, so that's what I do. The dmesg log says: [ 6672.753915] em28xx: New device @ 480 Mbps (eb1a:2820, interface 0, class 0) [ 6672.754323] em28xx #0: chip ID is em2820 (or em2710) [ 6672.844662] em28xx #0: board has no eeprom [ 6672.856403] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) [ 6672.871904] em28xx #0: found i2c device @ 0x42 [???] [ 6672.878901] em28xx #0: found i2c device @ 0x66 [???] [ 6672.879273] em28xx #0: found i2c device @ 0x68 [???] [ 6672.885150] em28xx #0: found i2c device @ 0x86 [tda9887] [ 6672.896149] em28xx #0: found i2c device @ 0xc0 [tuner (analog)] [ 6672.896523] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] [ 6672.907900] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 6672.907906] em28xx #0: You may try to use card=<n> insmod option to workaround that. [ 6672.907908] em28xx #0: Please send an email with this log to: [ 6672.907911] em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx> [ 6672.907914] em28xx #0: Board eeprom hash is 0x00000000 [ 6672.907916] em28xx #0: Board i2c devicelist hash is 0x742400f0 When adding the 'card=5' option, the log changes to: [10013.346671] em28xx: New device @ 480 Mbps (eb1a:2820, interface 0, class 0) [10013.347112] em28xx #0: chip ID is em2820 (or em2710) [10013.449303] em28xx #0: board has no eeprom [10013.449985] em28xx #0: Identified as MSI VOX USB 2.0 (card=5) [10013.848477] saa7115 1-0021: saa7114 found (1f7114d0e000000) @ 0x42 (em28xx #0) [10016.177760] tuner 1-0043: chip found @ 0x86 (em28xx #0) [10016.177869] tda9887 1-0043: creating new instance [10016.177873] tda9887 1-0043: tda988[5/6/7] found [10016.192029] All bytes are equal. It is not a TEA5767 [10016.192163] tuner 1-0060: chip found @ 0xc0 (em28xx #0) [10016.193010] tuner-simple 1-0060: creating new instance [10016.193015] tuner-simple 1-0060: type set to 37 (LG PAL (newer TAPC series)) [10016.240382] em28xx #0: Config register raw data: 0x00 [10016.372077] em28xx #0: v4l2 driver version 0.1.2 [10016.836166] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 [10016.848106] usbcore: registered new interface driver em28xx [10016.848114] em28xx driver loaded Now xawtv and mplayer do not seem to work: "xawtv" hangs when changing input. "mplayer tv://" gives v4l2: current audio mode is : MONO v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl queue buffer failed: Cannot allocate memory v4l2: 0 frames successfully processed, 0 frames dropped. Any ideas? Rutger. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
