From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
Date: Thu, 21 Sep 2017 16:24:20 +0200
Do not use curly brackets at some source code places
where a single statement should be sufficient.
Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/media/usb/usbvision/usbvision-core.c | 71 ++++++++++++----------------
1 file changed, 31 insertions(+), 40 deletions(-)
diff --git a/drivers/media/usb/usbvision/usbvision-core.c b/drivers/media/usb/usbvision/usbvision-core.c
index bb6f4f69165f..54db35b03106 100644
--- a/drivers/media/usb/usbvision/usbvision-core.c
+++ b/drivers/media/usb/usbvision/usbvision-core.c
@@ -188,10 +188,9 @@ static int scratch_free(struct usb_usbvision *usbvision)
int free = usbvision->scratch_read_ptr - usbvision->scratch_write_ptr;
if (free <= 0)
free += scratch_buf_size;
- if (free) {
+ if (free)
free -= 1; /* at least one byte in the buffer must */
/* left blank, otherwise there is no chance to differ between full and empty */
- }
PDEBUG(DBG_SCRATCH, "return %d\n", free);
return free;
@@ -699,11 +698,12 @@ static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision
frame = usbvision->cur_frame;
image_size = frame->frmwidth * frame->frmheight;
- if ((frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) ||
- (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420)) { /* this is a planar format */
+ if (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P ||
+ frame->v4l2_format.format == V4L2_PIX_FMT_YVU420)
+ /* this is a planar format */
/* ... v4l2_linesize not used here. */
f = frame->data + (frame->width * frame->curline);
- } else
+ else
f = frame->data + (frame->v4l2_linesize * frame->curline);
if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { /* initialise u and v pointers */
@@ -734,22 +734,19 @@ static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision
return parse_state_next_frame;
}
- if (frame->curline != (int)strip_header[2]) {
+ if (frame->curline != (int)strip_header[2])
/* line number mismatch error */
usbvision->strip_line_number_errors++;
- }
strip_len = 2 * (unsigned int)strip_header[1];
- if (strip_len > USBVISION_STRIP_LEN_MAX) {
+ if (strip_len > USBVISION_STRIP_LEN_MAX)
/* strip overrun */
/* I think this never happens */
usbvision_request_intra(usbvision);
- }
- if (scratch_len(usbvision) < strip_len) {
+ if (scratch_len(usbvision) < strip_len)
/* there is not enough data for the strip */
return parse_state_out;
- }
if (usbvision->intra_frame_buffer) {
Y = usbvision->intra_frame_buffer + frame->frmwidth * frame->curline;
@@ -1306,11 +1303,11 @@ static void usbvision_isoc_irq(struct urb *urb)
/* If we collected enough data let's parse! */
if (scratch_len(usbvision) > USBVISION_HEADER_LENGTH &&
!list_empty(&(usbvision->inqueue))) {
- if (!(*f)) {
+ if (!(*f))
(*f) = list_entry(usbvision->inqueue.next,
struct usbvision_frame,
frame);
- }
+
usbvision_parse_data(usbvision);
} else {
/* If we don't have a frame
@@ -1334,12 +1331,10 @@ static void usbvision_isoc_irq(struct urb *urb)
urb->status = 0;
urb->dev = usbvision->dev;
err_code = usb_submit_urb(urb, GFP_ATOMIC);
-
- if (err_code) {
+ if (err_code)
dev_err(&usbvision->dev->dev,
"%s: usb_submit_urb failed: error %d\n",
__func__, err_code);
- }
return;
}
@@ -1398,11 +1393,10 @@ int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg,
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_ENDPOINT, 0, (__u16) reg,
usbvision->ctrl_urb_buffer, 1, HZ);
-
- if (err_code < 0) {
+ if (err_code < 0)
dev_err(&usbvision->dev->dev,
"%s: failed: error %d\n", __func__, err_code);
- }
+
return err_code;
}
@@ -1443,10 +1437,10 @@ static int usbvision_write_reg_irq(struct usb_usbvision *usbvision, int address,
memcpy(usbvision->ctrl_urb_buffer, data, len);
err_code = usb_submit_urb(usbvision->ctrl_urb, GFP_ATOMIC);
- if (err_code < 0) {
+ if (err_code < 0)
/* error in usb_submit_urb() */
usbvision->ctrl_urb_busy = 0;
- }
+
PDEBUG(DBG_IRQ, "submit %d byte: error %d", len, err_code);
return err_code;
}
@@ -1477,11 +1471,11 @@ static int usbvision_measure_bandwidth(struct usb_usbvision *usbvision)
usbvision->isoc_measure_bandwidth_count++;
return 0;
}
- if ((usbvision->isoc_packet_size > 0) && (usbvision->isoc_packet_count > 0)) {
+ if (usbvision->isoc_packet_size > 0 && usbvision->isoc_packet_count > 0)
usbvision->used_bandwidth = usbvision->isoc_data_count /
(usbvision->isoc_packet_count + usbvision->isoc_skip_count) *
100 / usbvision->isoc_packet_size;
- }
+
usbvision->isoc_measure_bandwidth_count = 0;
usbvision->isoc_data_count = 0;
usbvision->isoc_packet_count = 0;
@@ -1648,11 +1642,10 @@ static int usbvision_set_video_format(struct usb_usbvision *usbvision, int forma
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_ENDPOINT, 0,
(__u16) USBVISION_FILT_CONT, value, 2, HZ);
-
- if (rc < 0) {
+ if (rc < 0)
printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - reconnect or reload driver.\n",
proc, rc);
- }
+
usbvision->isoc_mode = format;
return rc;
}
@@ -1935,17 +1928,17 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
return 0;
/* Set input format expected from decoder*/
- if (usbvision_device_data[usbvision->dev_model].vin_reg1_override) {
+ if (usbvision_device_data[usbvision->dev_model].vin_reg1_override)
value[0] = usbvision_device_data[usbvision->dev_model].vin_reg1;
- } else if (usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) {
+ else if (usbvision_device_data[usbvision->dev_model].codec
+ == CODEC_SAA7113)
/* SAA7113 uses 8 bit output */
value[0] = USBVISION_8_422_SYNC;
- } else {
+ else
/* I'm sure only about d2-d0 [010] 16 bit 4:2:2 usin sync pulses
* as that is how saa7111 is configured */
value[0] = USBVISION_16_422_SYNC;
/* | USBVISION_VSNC_POL | USBVISION_VCLK_POL);*/
- }
rc = usbvision_write_reg(usbvision, USBVISION_VIN_REG1, value[0]);
if (rc < 0)
@@ -2015,12 +2008,12 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
dvi_yuv_value = 0x00; /* U comes after V, Ya comes after U/V, Yb comes after Yb */
- if (usbvision_device_data[usbvision->dev_model].dvi_yuv_override) {
+ if (usbvision_device_data[usbvision->dev_model].dvi_yuv_override)
dvi_yuv_value = usbvision_device_data[usbvision->dev_model].dvi_yuv;
- } else if (usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) {
+ else if (usbvision_device_data[usbvision->dev_model].codec
+ == CODEC_SAA7113)
/* This changes as the fine sync control changes. Further investigation necessary */
dvi_yuv_value = 0x06;
- }
return usbvision_write_reg(usbvision, USBVISION_DVI_YUV, dvi_yuv_value);
@@ -2320,11 +2313,10 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) {
err_code = usb_submit_urb(usbvision->sbuf[buf_idx].urb,
GFP_KERNEL);
- if (err_code) {
+ if (err_code)
dev_err(&usbvision->dev->dev,
"%s: usb_submit_urb(%d) failed: error %d\n",
__func__, buf_idx, err_code);
- }
}
usbvision->streaming = stream_idle;
@@ -2352,12 +2344,12 @@ void usbvision_stop_isoc(struct usb_usbvision *usbvision)
/* Unschedule all of the iso td's */
for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) {
usb_kill_urb(usbvision->sbuf[buf_idx].urb);
- if (usbvision->sbuf[buf_idx].data) {
+ if (usbvision->sbuf[buf_idx].data)
usb_free_coherent(usbvision->dev,
sb_size,
usbvision->sbuf[buf_idx].data,
usbvision->sbuf[buf_idx].urb->transfer_dma);
- }
+
usb_free_urb(usbvision->sbuf[buf_idx].urb);
usbvision->sbuf[buf_idx].urb = NULL;
}
@@ -2409,14 +2401,13 @@ int usbvision_muxsel(struct usb_usbvision *usbvision, int channel)
switch (usbvision_device_data[usbvision->dev_model].codec) {
case CODEC_SAA7113:
mode[1] = SAA7115_COMPOSITE2;
- if (switch_svideo_input) {
+ if (switch_svideo_input)
/* To handle problems with S-Video Input for
* some devices. Use switch_svideo_input
* parameter when loading the module.*/
mode[2] = SAA7115_COMPOSITE1;
- } else {
+ else
mode[2] = SAA7115_SVIDEO1;
- }
break;
case CODEC_SAA7111:
default:
--
2.14.1
