On Tue, Sep 12, 2017 at 02:13:12PM -0500, Benoit Parrot wrote:
> > > + /*
> > > + * Create a static mapping between the CSI virtual channels
> > > + * and the output stream.
> > > + *
> > > + * This should be enhanced, but v4l2 lacks the support for
> > > + * changing that mapping dynamically.
> > > + *
> > > + * We also cannot enable and disable independant streams here,
> > > + * hence the reference counting.
> > > + */
> > > + for (i = 0; i < csi2rx->max_streams; i++) {
> > > + clk_prepare_enable(csi2rx->pixel_clk[i]);
> > > +
> > > + writel(CSI2RX_STREAM_CFG_FIFO_MODE_LARGE_BUF,
> > > + csi2rx->base + CSI2RX_STREAM_CFG_REG(i));
> > > +
> > > + writel(CSI2RX_STREAM_DATA_CFG_EN_VC_SELECT |
> > > + CSI2RX_STREAM_DATA_CFG_VC_SELECT(i),
> > > + csi2rx->base + CSI2RX_STREAM_DATA_CFG_REG(i));
>
> I see here that we are setting the data_type to 0 (as we are not
> setting it) so effectively capturing everything on the channel(s).
> Will we be adding a method to select/filter specific data type? For
> instance if we only want to grab YUV data in one stream and only
> RGB24 in another. Of course that would not be possible here as is...
Ah, right, I forgot about that. I've actually started that discussion
on another thread for a transceiver, without much success though:
https://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg117920.html
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Attachment:
signature.asc
Description: PGP signature
