On 11/15/2009 11:46 PM, Jarod Wilson wrote:
On 10/09/2009 09:27 PM, Robert Cicconetti wrote:
On Wed, Oct 7, 2009 at 10:08 PM, Jarod Wilson<jarod@xxxxxxxxxxxx> wrote:
On Oct 7, 2009, at 9:39 PM, Robert Cicconetti wrote:
Okay... I built the tip of the archive linked above. It works with my
UB435-Q fairly well, built against 2.6.28-15-generic #52-Ubuntu SMP
x86_64. I've been able to stream QAM256 content for several hours
reliably. Mythfrontend works somewhat... it'll tune the initial
channel, but fails afterward. I suspect it is timing out while waiting
for the RF tracking filter calibration... it adds about 6 seconds to
every tuning operation.
[ 812.465930] tda18271: performing RF tracking filter calibration
[ 818.572446] tda18271: RF tracking filter calibration complete
[ 818.953946] tda18271: performing RF tracking filter calibration
[ 825.093211] tda18271: RF tracking filter calibration complete
Any suggestions? Further data needed?
Nothing off the top of my head, no. But I've got a UB435-Q of my own
now,
sitting on my desk waiting for me to poke at it... Not sure when I'll
have
time to actually poke at it though. :\
A little further poking yields that RF_CAL_OK in EP1 is 0, which is
why it keeps recalibrating.
I've commented out the part of the code that recalibrates if RF_CAL_OK
is 0; EP1 always seems to be c6... and now mythfrontend is happy. :)
This is not a long term solution, but as ugly hacks go it was pretty
straight forward. :)
Finally got around to poking at this again. Forward-ported the patches
to the current v4l-dvb tip
Meant to include this:
http://wilsonet.com/jarod/junk/kworld-a340-20091115/
, and gave 'em a spin with my own UB435-Q, as
well as a 340U that Doug gave me when he was in town a bit ago. Both are
working just fine with my QAM feed here at the house, albeit with the
same lengthy delay when changing channels you (Robert) mentioned. At a
glance, I was hoping simply setting rf_cal_on_startup for the
card-specific tda18271_config would remove the delay, but neither a 0 or
a 1 seems to particularly help with tuning delays. Hoping maybe Mike has
an idea on this part...
In related news, I actually managed to get my original 340U with the C1
tuner to work briefly as well, and with the same code, no tuning delays.
Seems either the PCB is cracked or the usb connector is just that bad,
and it only works when positioned just so...
I'll give all three sticks I've got here a quick spin with an OTA signal
tomorrow too. But I think I'm not seeing any significant reason to not
move forward with trying to get this code finally merged.
--
Jarod Wilson
jarod@xxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
