2009/11/10 Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>: > On Tue, Nov 10, 2009 at 4:39 AM, Valerio Bontempi > <valerio.bontempi@xxxxxxxxx> wrote: >> Yes I rebooted the system after compiling and installing through 'make >> install' last v4l-dvb source, but with no luck, /dev/dvb device is >> still not present. >> >> Attached you can find the full dmesg, since system boot >> >> Thanks a lot again. >> >> >> P.s. Sorry for top posting, it's gmail0s default and sometimes I forget. > > Hello Valerio, > > Now that I have taken another look at the dmesg output, I see that > this device is 0ccd:0043 and *not* 0ccd:0042. This prompted me to > take another look at the driver, and indeed that board is not > presently supported. It's the DVB only version of the board (as > opposed to the hybrid). > > I can probably make it work, but it's a rather old board and not > terribly high on my list of priorities. > > Devin > > -- > Devin J. Heitmueller - Kernel Labs > http://www.kernellabs.com > Hi Devin, I feared about that So, in this moment my only possibilities available to make it work are: - use an older kernel (<=2.6.27) to compile successfully em28xx-new (maybe it could be better to use older linux distro) - make em28xx-new to compile on 2.6.31 kernel version - wait for device support on next kernel releases I have good programming knowledge, but few with C and driver programming, so if you can suggest me how can I modify em28xx-new sources to make them work on 2.6.31, then I can try to adjust them and then make this driver available just waiting for kernel support. Thanks a lot Valerio -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
