Hi Todor,
On Mon, Jul 17, 2017 at 01:33:42PM +0300, Todor Tomov wrote:
> Add support for horizontal and vertical frame padding.
>
> Signed-off-by: Todor Tomov <todor.tomov@xxxxxxxxxx>
> ---
> drivers/media/platform/qcom/camss-8x16/camss-vfe.c | 86 +++++++++++++++++-----
> .../media/platform/qcom/camss-8x16/camss-video.c | 69 ++++++++++++-----
> .../media/platform/qcom/camss-8x16/camss-video.h | 2 +
> 3 files changed, 121 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/camss-8x16/camss-vfe.c b/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
> index bef0209..327f158 100644
> --- a/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
> +++ b/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
> @@ -279,21 +279,75 @@ static void vfe_wm_frame_based(struct vfe_device *vfe, u8 wm, u8 enable)
> 1 << VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_FRM_BASED_SHIFT);
> }
>
> +#define CALC_WORD(width, M, N) (((width) * (M) + (N) - 1) / (N))
> +
> +static int vfe_word_per_line(uint32_t format, uint32_t pixel_per_line)
> +{
> + int val = 0;
> +
> + switch (format) {
> + case V4L2_PIX_FMT_NV12:
> + case V4L2_PIX_FMT_NV21:
> + case V4L2_PIX_FMT_NV16:
> + case V4L2_PIX_FMT_NV61:
> + val = CALC_WORD(pixel_per_line, 1, 8);
> + break;
> + case V4L2_PIX_FMT_YUYV:
> + case V4L2_PIX_FMT_YVYU:
> + case V4L2_PIX_FMT_UYVY:
> + case V4L2_PIX_FMT_VYUY:
> + val = CALC_WORD(pixel_per_line, 2, 8);
> + break;
> + }
> +
> + return val;
> +}
> +
> +static void vfe_get_wm_sizes(struct v4l2_pix_format_mplane *pix, u8 plane,
> + u16 *width, u16 *height, u16 *bytesperline)
> +{
> + switch (pix->pixelformat) {
> + case V4L2_PIX_FMT_NV12:
> + case V4L2_PIX_FMT_NV21:
> + *width = pix->width;
> + *height = pix->height;
> + *bytesperline = pix->plane_fmt[0].bytesperline;
> + if (plane == 1)
> + *height /= 2;
> + break;
> + case V4L2_PIX_FMT_NV16:
> + case V4L2_PIX_FMT_NV61:
> + *width = pix->width;
> + *height = pix->height;
> + *bytesperline = pix->plane_fmt[0].bytesperline;
> + break;
> + }
> +}
> +
> static void vfe_wm_line_based(struct vfe_device *vfe, u32 wm,
> - u16 width, u16 height, u32 enable)
> + struct v4l2_pix_format_mplane *pix,
> + u8 plane, u32 enable)
> {
> u32 reg;
>
> if (enable) {
> + u16 width = 0, height = 0, bytesperline = 0, wpl;
> +
> + vfe_get_wm_sizes(pix, plane, &width, &height, &bytesperline);
> +
> + wpl = vfe_word_per_line(pix->pixelformat, width);
> +
> reg = height - 1;
> - reg |= (width / 16 - 1) << 16;
> + reg |= ((wpl + 1) / 2 - 1) << 16;
>
> writel_relaxed(reg, vfe->base +
> VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(wm));
>
> + wpl = vfe_word_per_line(pix->pixelformat, bytesperline);
> +
> reg = 0x3;
> reg |= (height - 1) << 4;
> - reg |= (width / 8) << 16;
> + reg |= wpl << 16;
>
> writel_relaxed(reg, vfe->base +
> VFE_0_BUS_IMAGE_MASTER_n_WR_BUFFER_CFG(wm));
> @@ -1198,25 +1252,14 @@ static int vfe_enable_output(struct vfe_line *line)
> } else {
> ub_size /= output->wm_num;
> for (i = 0; i < output->wm_num; i++) {
> - u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
> -
> vfe_set_cgc_override(vfe, output->wm_idx[i], 1);
> vfe_wm_set_subsample(vfe, output->wm_idx[i]);
> vfe_wm_set_ub_cfg(vfe, output->wm_idx[i],
> (ub_size + 1) * output->wm_idx[i],
> ub_size);
> - if ((i == 1) && (p == V4L2_PIX_FMT_NV12 ||
> - p == V4L2_PIX_FMT_NV21))
> - vfe_wm_line_based(vfe, output->wm_idx[i],
> - line->fmt[MSM_VFE_PAD_SRC].width,
> - line->fmt[MSM_VFE_PAD_SRC].height / 2,
> - 1);
> - else
> - vfe_wm_line_based(vfe, output->wm_idx[i],
> - line->fmt[MSM_VFE_PAD_SRC].width,
> - line->fmt[MSM_VFE_PAD_SRC].height,
> - 1);
> -
> + vfe_wm_line_based(vfe, output->wm_idx[i],
> + &line->video_out.active_fmt.fmt.pix_mp,
> + i, 1);
> vfe_wm_enable(vfe, output->wm_idx[i], 1);
> vfe_bus_reload_wm(vfe, output->wm_idx[i]);
> }
> @@ -1278,7 +1321,7 @@ static int vfe_disable_output(struct vfe_line *line)
> spin_unlock_irqrestore(&vfe->output_lock, flags);
> } else {
> for (i = 0; i < output->wm_num; i++) {
> - vfe_wm_line_based(vfe, output->wm_idx[i], 0, 0, 0);
> + vfe_wm_line_based(vfe, output->wm_idx[i], NULL, i, 0);
> vfe_set_cgc_override(vfe, output->wm_idx[i], 0);
> }
>
> @@ -2363,9 +2406,14 @@ int msm_vfe_register_entities(struct vfe_device *vfe,
> }
>
> video_out->ops = &camss_vfe_video_ops;
> + video_out->bpl_alignment = 8;
> + video_out->line_based = 0;
> video_out->fmt_tag = CAMSS_FMT_TAG_RDI;
> - if (i == VFE_LINE_PIX)
> + if (i == VFE_LINE_PIX) {
> + video_out->bpl_alignment = 16;
> + video_out->line_based = 1;
> video_out->fmt_tag = CAMSS_FMT_TAG_PIX;
> + }
> snprintf(name, ARRAY_SIZE(name), "%s%d_%s%d",
> MSM_VFE_NAME, vfe->id, "video", i);
> ret = msm_video_register(video_out, v4l2_dev, name);
> diff --git a/drivers/media/platform/qcom/camss-8x16/camss-video.c b/drivers/media/platform/qcom/camss-8x16/camss-video.c
> index c5ebf5c..5a2bf18 100644
> --- a/drivers/media/platform/qcom/camss-8x16/camss-video.c
> +++ b/drivers/media/platform/qcom/camss-8x16/camss-video.c
> @@ -194,13 +194,15 @@ static int video_find_format_n(u32 code, u32 index, enum camss_fmt_tag tag)
> * @mbus: v4l2_mbus_framefmt format
> * @pix: v4l2_pix_format_mplane format (output)
> * @index: index of an entry in formats array to be used for the conversion
> + * @alignment: bytesperline alignment value
> *
> * Fill the output pix structure with information from the input mbus format.
> *
> * Return 0 on success or a negative error code otherwise
> */
> static int video_mbus_to_pix_mp(const struct v4l2_mbus_framefmt *mbus,
> - struct v4l2_pix_format_mplane *pix, int index)
> + struct v4l2_pix_format_mplane *pix, int index,
> + unsigned int alignment)
> {
> const struct format_info *f;
> unsigned int i;
> @@ -214,7 +216,7 @@ static int video_mbus_to_pix_mp(const struct v4l2_mbus_framefmt *mbus,
> for (i = 0; i < pix->num_planes; i++) {
> bytesperline = pix->width / f->hsub[i].numerator *
> f->hsub[i].denominator * f->bpp[i] / 8;
> - bytesperline = ALIGN(bytesperline, 8);
> + bytesperline = ALIGN(bytesperline, alignment);
> pix->plane_fmt[i].bytesperline = bytesperline;
> pix->plane_fmt[i].sizeimage = pix->height /
> f->vsub[i].numerator * f->vsub[i].denominator *
> @@ -267,7 +269,8 @@ static int video_get_subdev_format(struct camss_video *video,
> if (ret < 0)
> return ret;
>
> - return video_mbus_to_pix_mp(&fmt.format, &format->fmt.pix_mp, ret);
> + return video_mbus_to_pix_mp(&fmt.format, &format->fmt.pix_mp, ret,
> + video->bpl_alignment);
> }
>
> static int video_get_pixelformat(struct camss_video *video, u32 *pixelformat,
> @@ -395,7 +398,6 @@ static int video_check_format(struct camss_video *video)
> struct v4l2_pix_format_mplane *pix = &video->active_fmt.fmt.pix_mp;
> struct v4l2_pix_format_mplane *sd_pix;
> struct v4l2_format format;
> - unsigned int i;
> int ret;
>
> sd_pix = &format.fmt.pix_mp;
> @@ -411,13 +413,6 @@ static int video_check_format(struct camss_video *video)
> pix->field != format.fmt.pix_mp.field)
> return -EINVAL;
>
> - for (i = 0; i < pix->num_planes; i++)
> - if (pix->plane_fmt[i].bytesperline !=
> - sd_pix->plane_fmt[i].bytesperline ||
> - pix->plane_fmt[i].sizeimage !=
> - sd_pix->plane_fmt[i].sizeimage)
> - return -EINVAL;
> -
> return 0;
> }
>
> @@ -542,28 +537,68 @@ static int video_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
> return 0;
> }
>
> -static int video_s_fmt(struct file *file, void *fh, struct v4l2_format *f)
> +static int video_try_fmt(struct file *file, void *fh, struct v4l2_format *f)
> {
> struct camss_video *video = video_drvdata(file);
> + struct v4l2_plane_pix_format *p;
> + u32 bytesperline[3] = { 0 };
> + u32 sizeimage[3] = { 0 };
> + u32 lines;
> int ret;
> + int i;
>
> - if (vb2_is_busy(&video->vb2_q))
> - return -EBUSY;
> + if (video->line_based)
> + for (i = 0; i < f->fmt.pix_mp.num_planes && i < 3; i++) {
> + p = &f->fmt.pix_mp.plane_fmt[i];
> + bytesperline[i] = clamp_t(u32, p->bytesperline,
> + 1, 65528);
> + sizeimage[i] = clamp_t(u32, p->sizeimage,
> + bytesperline[i],
> + bytesperline[i] * 4096);
> + }
>
> ret = video_get_subdev_format(video, f);
> if (ret < 0)
> return ret;
If you take the width and height from the sub-device format, then for the
user to figure out how big a buffer is needed for a particular format it
takes to change the sub-device format.
I wouldn't do this but keep the image dimensions on the video node
independent of what's configured on the sub-device.
This patch doesn't really change the behaviour, but a patch before this
one. That's where the fix should be (as well).
>
> - video->active_fmt = *f;
> + if (video->line_based)
> + for (i = 0; i < f->fmt.pix_mp.num_planes; i++) {
> + p = &f->fmt.pix_mp.plane_fmt[i];
> + p->bytesperline = clamp_t(u32, p->bytesperline,
> + 1, 65528);
> + p->sizeimage = clamp_t(u32, p->sizeimage,
> + p->bytesperline,
> + p->bytesperline * 4096);
> + lines = p->sizeimage / p->bytesperline;
> +
> + if (p->bytesperline < bytesperline[i])
> + p->bytesperline = ALIGN(bytesperline[i], 8);
> +
> + if (p->sizeimage < p->bytesperline * lines)
> + p->sizeimage = p->bytesperline * lines;
> +
> + if (p->sizeimage < sizeimage[i])
> + p->sizeimage = sizeimage[i];
> + }
>
> return 0;
> }
>
> -static int video_try_fmt(struct file *file, void *fh, struct v4l2_format *f)
> +static int video_s_fmt(struct file *file, void *fh, struct v4l2_format *f)
> {
> struct camss_video *video = video_drvdata(file);
> + int ret;
> +
> + if (vb2_is_busy(&video->vb2_q))
> + return -EBUSY;
>
> - return video_get_subdev_format(video, f);
> + ret = video_try_fmt(file, fh, f);
> + if (ret < 0)
> + return ret;
> +
> + video->active_fmt = *f;
> +
> + return 0;
> }
>
> static int video_enum_input(struct file *file, void *fh,
> diff --git a/drivers/media/platform/qcom/camss-8x16/camss-video.h b/drivers/media/platform/qcom/camss-8x16/camss-video.h
> index eff6b3d..e36a75b 100644
> --- a/drivers/media/platform/qcom/camss-8x16/camss-video.h
> +++ b/drivers/media/platform/qcom/camss-8x16/camss-video.h
> @@ -57,6 +57,8 @@ struct camss_video {
> const struct camss_video_ops *ops;
> struct mutex lock;
> struct mutex q_lock;
> + unsigned int bpl_alignment;
> + unsigned int line_based;
> enum camss_fmt_tag fmt_tag;
> };
>
--
Sakari Ailus
e-mail: sakari.ailus@xxxxxx XMPP: sailus@xxxxxxxxxxxxxx
