Am Samstag, den 15.07.2017, 12:54 +0300 schrieb Laurent Pinchart: > Hi Philipp, > > Thank you for the patch. > > On Friday 14 Jul 2017 22:14:24 Philipp Zabel wrote: > > The Oculus Rift Sensors (DK2 and CV1) allow to configure their sensor chips > > directly via I2C commands using extension unit controls. The processing and > > camera unit controls do not function at all. > > Do the processing and camera units they report controls that don't work when > exercised ? Who in a sane state of mind could have designed such a terrible > product ? Yes. Without this patch I get a bunch of controls that have no effect whatsoever. > If I understand you correctly, this device requires userspace code that knows > how to program the sensor (and possibly other chips). If that's the case, is > there an open-source implementation of that code publicly available ? Well, it's all still a bit in the experimentation phase. We have an implementation to set up the DK2 camera for synchronised exposure triggered by the Rift DK2 HMD and to read the calibration data from flash, here: https://github.com/pH5/ouvrt/blob/master/src/esp570.c https://github.com/pH5/ouvrt/blob/master/src/mt9v034.c And an even more rough version to set up the CV1 camera for synchronised exposure triggered by the Rift CV1 HMD here: https://github.com/OpenHMD/OpenHMD-RiftPlayground/blob/master/src/main.c The latter is using libusb, as it needs the variable length SPI data control. Do you think adding a pseudo i2c driver for the eSP570/eSP770u webcam controllers and then exposing the sensor chips as V4L2 subdevices could be a good idea? We already have a sensor driver for the MT9V034 in the DK2 USB camera. regards Philipp
