On Fri, May 26, 2017 at 08:49:07AM +0200, Simon Horman wrote: > On Fri, May 19, 2017 at 03:07:00PM +0200, Ulrich Hecht wrote: > > Hi! > > > > This is a by-the-datasheet implementation of analog and digital video input > > on the Gose board. > > > > This revision adds new bindings that distinguish between ADV7180 variants > > with three and six input ports. There are numerous variants of this chip, > > but since all that have "CP" in their names have three inputs, and all that > > have "ST" have six, I have limited myself to two new compatible strings, > > "adv7180cp" and "adv7180st". > > > > The digital input patch has received minor tweaks of the port names for > > consistency, and the Gose analog input patch has been modified to use the > > new bindings, and a composite video connector has been added. > > > > CU > > Uli > > > > > > Changes since v2: > > - hdmi: port hdmi_con renamed to hdmi_con_out > > - adv7180: added new compatibility strings and bindings > > - composite: added connector, use new bindings > > > > Changes since v1: > > - r8a7793.dtsi: added VIN2 > > - modeled HDMI decoder input/output and connector > > - added "renesas,rcar-gen2-vin" compat strings > > - removed unnecessary "remote" node and aliases > > - set ADV7612 interrupt to GP4_2 > > > > > > Ulrich Hecht (4): > > ARM: dts: gose: add HDMI input > > I have queued-up the above patch for v4.13. > > > media: adv7180: add adv7180cp, adv7180st compatible strings > > media: adv7180: Add adv7180cp, adv7180st bindings > > ARM: dts: gose: add composite video input > > I have marked the above dts patch as "deferred" pending acceptance > of the binding. Please repost or otherwise ping me once that has happened. It looks like Hans will pick up the driver patches. Accordingly I have queued-up the last dts patch above.
