Hi! This is a by-the-datasheet implementation of analog and digital video input on the Gose board. This revision adds new bindings that distinguish between ADV7180 variants with three and six input ports. There are numerous variants of this chip, but since all that have "CP" in their names have three inputs, and all that have "ST" have six, I have limited myself to two new compatible strings, "adv7180cp" and "adv7180st". The digital input patch has received minor tweaks of the port names for consistency, and the Gose analog input patch has been modified to use the new bindings, and a composite video connector has been added. CU Uli Changes since v2: - hdmi: port hdmi_con renamed to hdmi_con_out - adv7180: added new compatibility strings and bindings - composite: added connector, use new bindings Changes since v1: - r8a7793.dtsi: added VIN2 - modeled HDMI decoder input/output and connector - added "renesas,rcar-gen2-vin" compat strings - removed unnecessary "remote" node and aliases - set ADV7612 interrupt to GP4_2 Ulrich Hecht (4): ARM: dts: gose: add HDMI input media: adv7180: add adv7180cp, adv7180st compatible strings media: adv7180: Add adv7180cp, adv7180st bindings ARM: dts: gose: add composite video input .../devicetree/bindings/media/i2c/adv7180.txt | 15 +++ arch/arm/boot/dts/r8a7793-gose.dts | 127 ++++++++++++++++++++- drivers/media/i2c/adv7180.c | 2 + 3 files changed, 142 insertions(+), 2 deletions(-) -- 2.7.4
