Am 15.04.2017 um 20:28 schrieb Anders Eriksson: > Hi Mauro, > > I've two devices using this driver, and whenever I have them both in > use I eventually (between 10K and 100K secs uptime) i2c write errors > such as in the log below. If only have one of the devices in use, the > machine is stable. > > The machine never recovers from the error. > > All help apreciated. > -Anders > > > > [ 0.000000] Booting Linux on physical CPU 0xf00 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 4.4.15-v7+ (dc4@dc4-XPS13-9333) (gcc > version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #897 > SMP Tue Jul 12 18:42:55 BST 2016 > [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing > instruction cache > [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1 > [ 0.000000] cma: Reserved 8 MiB at 0x3a800000 > [ 0.000000] Memory policy: Data cache writealloc > [ 0.000000] On node 0 totalpages: 241664 > [ 0.000000] free_area_init_node: node 0, pgdat 808c0e00, > node_mem_map b9fa6000 > [ 0.000000] Normal zone: 2124 pages used for memmap > [ 0.000000] Normal zone: 0 pages reserved > [ 0.000000] Normal zone: 241664 pages, LIFO batch:31 > [ 0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010) > [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 > [ 0.000000] PERCPU: Embedded 13 pages/cpu @b9f62000 s22592 r8192 > d22464 u53248 > [ 0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096 > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 239540 > [ 0.000000] Kernel command line: dma.dmachans=0x7f35 > bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 > bcm2709.boardrev=0xa01041 bcm2709.serial=0x9aa48012 > smsc95xx.macaddr=B8:27:EB:A4:80:12 bcm2708_fb.fbswap=1 > bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=47 > bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 > vc_mem.mem_size=0x3f000000 root=/dev/mmcblk0p4 smsc95xx.turbo_mode=N > rootdelay=2 console=ttyAMA0,115200 console=tty0 kgdboc=ttyAMA0,115200 > init=/usr/lib/systemd/systemd ro > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > [ 0.000000] Memory: 939080K/966656K available (6344K kernel code, > 432K rwdata, 1712K rodata, 476K init, 764K bss, 19384K reserved, 8192K > cma-reserved) > [ 0.000000] Virtual kernel memory layout: > vector : 0xffff0000 - 0xffff1000 ( 4 kB) > fixmap : 0xffc00000 - 0xfff00000 (3072 kB) > vmalloc : 0xbb800000 - 0xff800000 (1088 MB) > lowmem : 0x80000000 - 0xbb000000 ( 944 MB) > modules : 0x7f000000 - 0x80000000 ( 16 MB) > .text : 0x80008000 - 0x807e6470 (8058 kB) > .init : 0x807e7000 - 0x8085e000 ( 476 kB) > .data : 0x8085e000 - 0x808ca108 ( 433 kB) > .bss : 0x808cd000 - 0x8098c1ac ( 765 kB) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] Build-time adjustment of leaf fanout to 32. > [ 0.000000] NR_IRQS:16 nr_irqs:16 16 > [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys). > [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff > max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns > [ 0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps > every 4398046511078ns > [ 0.000032] Switching to timer-based delay loop, resolution 52ns > [ 0.000353] Console: colour dummy device 80x30 > [ 0.001539] console [tty0] enabled > [ 0.001591] Calibrating delay loop (skipped), value calculated > using timer frequency.. 38.40 BogoMIPS (lpj=192000) > [ 0.001667] pid_max: default: 32768 minimum: 301 > [ 0.002077] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.002128] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.003338] Disabling cpuset control group subsystem > [ 0.003423] Initializing cgroup subsys io > [ 0.003483] Initializing cgroup subsys memory > [ 0.003563] Initializing cgroup subsys devices > [ 0.003615] Initializing cgroup subsys freezer > [ 0.003665] Initializing cgroup subsys net_cls > [ 0.003764] CPU: Testing write buffer coherency: ok > [ 0.003878] ftrace: allocating 21209 entries in 63 pages > [ 0.056189] CPU0: update cpu_capacity 1024 > [ 0.056269] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 > [ 0.056306] [bcm2709_smp_prepare_cpus] enter > [ 0.056463] Setting up static identity map for 0x8240 - 0x8274 > [ 0.058860] [bcm2709_boot_secondary] cpu:1 started (0) 18 > [ 0.059298] [bcm2709_secondary_init] enter cpu:1 > [ 0.059356] CPU1: update cpu_capacity 1024 > [ 0.059364] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 > [ 0.059943] [bcm2709_boot_secondary] cpu:2 started (0) 17 > [ 0.060295] [bcm2709_secondary_init] enter cpu:2 > [ 0.060328] CPU2: update cpu_capacity 1024 > [ 0.060335] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 > [ 0.060883] [bcm2709_boot_secondary] cpu:3 started (0) 18 > [ 0.061137] [bcm2709_secondary_init] enter cpu:3 > [ 0.061167] CPU3: update cpu_capacity 1024 > [ 0.061174] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 > [ 0.061264] Brought up 4 CPUs > [ 0.061375] SMP: Total of 4 processors activated (153.60 BogoMIPS). > [ 0.061408] CPU: All CPU(s) started in HYP mode. > [ 0.061437] CPU: Virtualization extensions available. > [ 0.062364] devtmpfs: initialized > [ 0.075166] VFP support v0.3: implementor 41 architecture 2 part 30 > variant 7 rev 5 > [ 0.075713] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 19112604462750000 ns > [ 0.076747] pinctrl core: initialized pinctrl subsystem > [ 0.077575] NET: Registered protocol family 16 > [ 0.083361] DMA: preallocated 4096 KiB pool for atomic coherent allocations > [ 0.091589] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 > watchpoint registers. > [ 0.091652] hw-breakpoint: maximum watchpoint size is 8 bytes. > [ 0.091884] Serial: AMBA PL011 UART driver > [ 0.092251] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, > base_baud = 0) is a PL011 rev2 > [ 0.596795] console [ttyAMA0] enabled > [ 0.601103] bcm2835-mbox 3f00b880.mailbox: mailbox enabled > [ 0.680457] bcm2835-dma 3f007000.dma: DMA legacy API manager at > f3007000, dmachans=0x1 > [ 0.689191] SCSI subsystem initialized > [ 0.693202] usbcore: registered new interface driver usbfs > [ 0.698854] usbcore: registered new interface driver hub > [ 0.704340] usbcore: registered new device driver usb > [ 0.719519] raspberrypi-firmware soc:firmware: Attached to firmware > from 2017-01-12 16:26 > [ 0.755260] clocksource: Switched to clocksource arch_sys_counter > [ 0.814512] FS-Cache: Loaded > [ 0.817856] CacheFiles: Loaded > [ 0.837339] NET: Registered protocol family 2 > [ 0.842977] TCP established hash table entries: 8192 (order: 3, 32768 bytes) > [ 0.850256] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) > [ 0.856936] TCP: Hash tables configured (established 8192 bind 8192) > [ 0.863461] UDP hash table entries: 512 (order: 2, 16384 bytes) > [ 0.869491] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > [ 0.876221] NET: Registered protocol family 1 > [ 0.881082] RPC: Registered named UNIX socket transport module. > [ 0.887081] RPC: Registered udp transport module. > [ 0.891808] RPC: Registered tcp transport module. > [ 0.896553] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 0.904399] hw perfevents: enabled with armv7_cortex_a7 PMU driver, > 5 counters available > [ 0.914282] futex hash table entries: 1024 (order: 4, 65536 bytes) > [ 0.936767] VFS: Disk quotas dquot_6.6.0 > [ 0.941136] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 0.950937] FS-Cache: Netfs 'nfs' registered for caching > [ 0.957468] NFS: Registering the id_resolver key type > [ 0.962612] Key type id_resolver registered > [ 0.966852] Key type id_legacy registered > [ 0.974175] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 252) > [ 0.981862] io scheduler noop registered > [ 0.985854] io scheduler deadline registered > [ 0.990215] io scheduler cfq registered (default) > [ 0.997919] BCM2708FB: allocated DMA memory fac00000 > [ 1.002951] BCM2708FB: allocated DMA channel 0 @ f3007000 > [ 1.014322] Console: switching to colour frame buffer device 82x26 > [ 1.026354] KGDB: Registered I/O driver kgdboc > [ 2.085077] bcm2835-rng 3f104000.rng: hwrng registered > [ 2.092059] vc-cma: Videocore CMA driver > [ 2.097678] vc-cma: vc_cma_base = 0x00000000 > [ 2.103982] vc-cma: vc_cma_size = 0x00000000 (0 MiB) > [ 2.110935] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) > [ 2.118131] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 > mem_size:0x3f000000(1008 MiB) > [ 2.149794] brd: module loaded > [ 2.165602] loop: module loaded > [ 2.171318] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0 > [ 2.181484] Loading iSCSI transport class v2.0-870. > [ 2.188857] usbcore: registered new interface driver smsc95xx > [ 2.196211] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) > [ 2.403829] Core Release: 2.80a > [ 2.408439] Setting default values for core params > [ 2.414730] Finished setting default values for core params > [ 2.622293] Using Buffer DMA mode > [ 2.627121] Periodic Transfer Interrupt Enhancement - disabled > [ 2.634508] Multiprocessor Interrupt Enhancement - disabled > [ 2.641647] OTG VER PARAM: 0, OTG VER FLAG: 0 > [ 2.647556] Dedicated Tx FIFOs mode > [ 2.652968] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: > virt = 0xbac14000 dma = 0xfac14000 len=9024 > [ 2.666024] FIQ FSM acceleration enabled for : > Non-periodic Split Transactions > Periodic Split Transactions > High-Speed Isochronous Endpoints > Interrupt/Control Split Transaction hack enabled > [ 2.696383] dwc_otg: Microframe scheduler enabled > [ 2.696461] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80446aa0 > [ 2.704033] WARN::hcd_init_fiq:414: FIQ ASM at 0x80446e10 length 36 > [ 2.711908] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb87e000 > [ 2.719547] dwc_otg 3f980000.usb: DWC OTG Controller > [ 2.726134] dwc_otg 3f980000.usb: new USB bus registered, assigned > bus number 1 > [ 2.735070] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 > [ 2.742263] Init: Port Power? op_state=1 > [ 2.747748] Init: Power Port (0) > [ 2.752758] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 2.761150] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.769959] usb usb1: Product: DWC OTG Controller > [ 2.776216] usb usb1: Manufacturer: Linux 4.4.15-v7+ dwc_otg_hcd > [ 2.783765] usb usb1: SerialNumber: 3f980000.usb > [ 2.790998] hub 1-0:1.0: USB hub found > [ 2.796308] hub 1-0:1.0: 1 port detected > [ 2.802468] dwc_otg: FIQ enabled > [ 2.802482] dwc_otg: NAK holdoff enabled > [ 2.802491] dwc_otg: FIQ split-transaction FSM enabled > [ 2.802532] Module dwc_common_port init > [ 2.802873] usbcore: registered new interface driver usb-storage > [ 2.810732] mousedev: PS/2 mouse device common for all mice > [ 2.818708] bcm2835-cpufreq: min=600000 max=900000 > [ 2.825369] sdhci: Secure Digital Host Controller Interface driver > [ 2.833089] sdhci: Copyright(c) Pierre Ossman > [ 2.839361] sdhost: log_buf @ bac13000 (fac13000) > [ 2.925302] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) > [ 2.932626] sdhci-pltfm: SDHCI platform and OF driver helper > [ 2.940600] ledtrig-cpu: registered to indicate activity on CPUs > [ 2.948423] hidraw: raw HID events driver (C) Jiri Kosina > [ 2.955660] usbcore: registered new interface driver usbhid > [ 2.962790] usbhid: USB HID core driver > [ 2.968864] Initializing XFRM netlink socket > [ 2.974721] NET: Registered protocol family 17 > [ 2.980874] Key type dns_resolver registered > [ 2.987212] Registering SWP/SWPB emulation handler > [ 2.992794] mmc0: host does not support reading read-only switch, > assuming write-enable > [ 2.994903] mmc0: new high speed SDHC card at address 59b4 > [ 2.995926] mmcblk0: mmc0:59b4 USD 7.51 GiB > [ 3.005312] mmcblk0: p1 p2 p3 p4 > [ 3.022795] Indeed it is in host mode hprt0 = 00021501 > [ 3.030624] registered taskstats version 1 > [ 3.036634] vc-sm: Videocore shared memory driver > [ 3.042917] [vc_sm_connected_init]: start > [ 3.049253] [vc_sm_connected_init]: end - returning 0 > [ 3.056253] of_cfs_init > [ 3.060295] of_cfs_init: OK > [ 3.065562] Waiting 2 sec before mounting root device... > [ 3.205302] usb 1-1: new high-speed USB device number 2 using dwc_otg > [ 3.205480] Indeed it is in host mode hprt0 = 00001101 > [ 3.405636] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 > [ 3.413891] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 3.423553] hub 1-1:1.0: USB hub found > [ 3.428998] hub 1-1:1.0: 5 ports detected > [ 3.715296] usb 1-1.1: new high-speed USB device number 3 using dwc_otg > [ 3.835616] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 > [ 3.844059] usb 1-1.1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 3.855838] smsc95xx v1.0.4 > [ 3.919555] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at > usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a4:80:12 > [ 4.025295] usb 1-1.4: new high-speed USB device number 4 using dwc_otg > [ 4.145824] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0201 > [ 4.154353] usb 1-1.4: New USB device strings: Mfr=0, Product=1, > SerialNumber=0 > [ 4.163343] usb 1-1.4: Product: USB 2.0 Hub [MTT] > [ 4.170629] hub 1-1.4:1.0: USB hub found > [ 4.176361] hub 1-1.4:1.0: 7 ports detected > [ 4.275296] usb 1-1.5: new high-speed USB device number 5 using dwc_otg > [ 4.395668] usb 1-1.5: New USB device found, idVendor=0409, idProduct=005a > [ 4.404290] usb 1-1.5: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 4.414246] hub 1-1.5:1.0: USB hub found > [ 4.420082] hub 1-1.5:1.0: 4 ports detected > [ 4.485310] usb 1-1.4.2: new high-speed USB device number 6 using dwc_otg > [ 4.606205] usb 1-1.4.2: New USB device found, idVendor=2013, idProduct=024f > [ 4.614941] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 4.625773] usb 1-1.4.2: Product: PCTV 290e > [ 4.631628] usb 1-1.4.2: Manufacturer: PCTV Systems > [ 4.638193] usb 1-1.4.2: SerialNumber: 00000010VKB7 > [ 4.725298] usb 1-1.5.1: new high-speed USB device number 7 using dwc_otg > [ 4.845620] usb 1-1.5.1: New USB device found, idVendor=0409, idProduct=005a > [ 4.854279] usb 1-1.5.1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 4.865669] hub 1-1.5.1:1.0: USB hub found > [ 4.871431] hub 1-1.5.1:1.0: 4 ports detected > [ 4.955295] usb 1-1.5.4: new high-speed USB device number 8 using dwc_otg > [ 5.075812] usb 1-1.5.4: New USB device found, idVendor=0409, idProduct=005a > [ 5.078766] EXT4-fs (mmcblk0p4): couldn't mount as ext3 due to > feature incompatibilities > [ 5.079667] EXT4-fs (mmcblk0p4): couldn't mount as ext2 due to > feature incompatibilities > [ 5.081778] EXT4-fs (mmcblk0p4): INFO: recovery required on > readonly filesystem > [ 5.081785] EXT4-fs (mmcblk0p4): write access will be enabled during recovery > [ 5.125400] usb 1-1.5.4: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 5.137594] hub 1-1.5.4:1.0: USB hub found > [ 5.143642] hub 1-1.5.4:1.0: 4 ports detected > [ 5.195300] usb 1-1.5.1.1: new high-speed USB device number 9 using dwc_otg > [ 5.316192] usb 1-1.5.1.1: New USB device found, idVendor=2013, > idProduct=025f > [ 5.325353] usb 1-1.5.1.1: New USB device strings: Mfr=3, > Product=1, SerialNumber=2 > [ 5.336653] usb 1-1.5.1.1: Product: PCTV 292e > [ 5.342858] usb 1-1.5.1.1: Manufacturer: PCTV > [ 5.349021] usb 1-1.5.1.1: SerialNumber: 0011412129 > [ 5.435310] usb 1-1.5.4.1: new full-speed USB device number 10 using dwc_otg > [ 5.559146] usb 1-1.5.4.1: New USB device found, idVendor=0403, > idProduct=6001 > [ 5.568270] usb 1-1.5.4.1: New USB device strings: Mfr=1, > Product=2, SerialNumber=3 > [ 5.579479] usb 1-1.5.4.1: Product: Smartreader2 plus > [ 5.586329] usb 1-1.5.4.1: Manufacturer: Argolis BV > [ 5.592905] usb 1-1.5.4.1: SerialNumber: > [ 5.655311] usb 1-1.5.1.2: new full-speed USB device number 11 using dwc_otg > [ 5.794180] usb 1-1.5.1.2: New USB device found, idVendor=1781, > idProduct=0c31 > [ 5.803114] usb 1-1.5.1.2: New USB device strings: Mfr=1, > Product=2, SerialNumber=3 > [ 5.813891] usb 1-1.5.1.2: Product: TellStick Duo > [ 5.820202] usb 1-1.5.1.2: Manufacturer: Telldus > [ 5.826427] usb 1-1.5.1.2: SerialNumber: A703AJYN > [ 5.885317] usb 1-1.5.4.4: new high-speed USB device number 12 using dwc_otg > [ 6.006822] usb 1-1.5.4.4: New USB device found, idVendor=04e8, > idProduct=61b5 > [ 6.015768] usb 1-1.5.4.4: New USB device strings: Mfr=1, > Product=2, SerialNumber=3 > [ 6.026482] usb 1-1.5.4.4: Product: Samsung M3 Portable > [ 6.033310] usb 1-1.5.4.4: Manufacturer: Samsung M3 Portable > [ 6.040618] usb 1-1.5.4.4: SerialNumber: 0A247DF106000060 > [ 6.050626] usb-storage 1-1.5.4.4:1.0: USB Mass Storage device detected > [ 6.059997] scsi host0: usb-storage 1-1.5.4.4:1.0 > [ 6.105356] usb 1-1.5.1.3: new high-speed USB device number 13 using dwc_otg > [ 6.226204] usb 1-1.5.1.3: New USB device found, idVendor=152d, > idProduct=2329 > [ 6.235086] usb 1-1.5.1.3: New USB device strings: Mfr=1, > Product=2, SerialNumber=5 > [ 6.246040] usb 1-1.5.1.3: Product: USB to ATA/ATAPI bridge > [ 6.253314] usb 1-1.5.1.3: Manufacturer: JMicron > [ 6.259609] usb 1-1.5.1.3: SerialNumber: 66E49349 > [ 6.267420] usb-storage 1-1.5.1.3:1.0: USB Mass Storage device detected > [ 6.276088] usb-storage 1-1.5.1.3:1.0: Quirks match for vid 152d > pid 2329: 8020 > [ 6.285175] scsi host1: usb-storage 1-1.5.1.3:1.0 > [ 6.316102] EXT4-fs (mmcblk0p4): recovery complete > [ 6.372517] EXT4-fs (mmcblk0p4): mounted filesystem with ordered > data mode. Opts: (null) > [ 6.384104] VFS: Mounted root (ext4 filesystem) readonly on device 179:4. > [ 6.393638] devtmpfs: mounted > [ 6.399172] Freeing unused kernel memory: 476K (807e7000 - 8085e000) > [ 6.798985] NET: Registered protocol family 10 > [ 6.822700] random: systemd urandom read with 91 bits of entropy available > [ 6.857946] systemd[1]: systemd 228 running in system mode. (+PAM > -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP > -GCRYPT +GNUTLS -ACL -XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) > [ 6.882472] systemd[1]: Detected architecture arm. > [ 6.897293] systemd[1]: Set hostname to <rpi2.lan>. > [ 7.066503] scsi 0:0:0:0: Direct-Access Samsung M3 Portable > 1404 PQ: 0 ANSI: 6 > [ 7.078692] uart-pl011 3f201000.uart: no DMA platform data > [ 7.088016] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: > (2.00 TB/1.82 TiB) > [ 7.100832] sd 0:0:0:0: [sda] Write Protect is off > [ 7.107665] sd 0:0:0:0: [sda] Mode Sense: 33 00 00 08 > [ 7.108963] sd 0:0:0:0: [sda] No Caching mode page found > [ 7.116231] sd 0:0:0:0: [sda] Assuming drive cache: write through > [ 7.286626] scsi 1:0:0:0: Direct-Access ST950032 5AS > 0002 PQ: 0 ANSI: 2 CCS > [ 7.302447] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: > (500 GB/466 GiB) > [ 7.314646] sd 1:0:0:0: [sdb] Write Protect is off > [ 7.321376] sd 1:0:0:0: [sdb] Mode Sense: 28 00 00 00 > [ 7.322104] sd 1:0:0:0: [sdb] No Caching mode page found > [ 7.329277] sd 1:0:0:0: [sdb] Assuming drive cache: write through > [ 7.377621] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > > [ 7.389588] sd 0:0:0:0: [sda] Attached SCSI disk > [ 7.948691] systemd[1]: rpc-svcgssd.service: Cannot add dependency > job, ignoring: Unit rpc-svcgssd.service failed to load: No such file > or directory. > [ 7.966054] systemd[1]: rpc-gssd.service: Cannot add dependency > job, ignoring: Unit rpc-gssd.service failed to load: No such file or > directory. > [ 7.982846] systemd[1]: gssproxy.service: Cannot add dependency > job, ignoring: Unit gssproxy.service failed to load: No such file or > directory. > [ 8.000199] systemd[1]: display-manager.service: Cannot add > dependency job, ignoring: Unit display-manager.service failed to load: > No such file or directory. > [ 8.042572] systemd[1]: Started Forward Password Requests to Wall > Directory Watch. > [ 8.060866] systemd[1]: Created slice User and Session Slice. > [ 8.072099] systemd[1]: Listening on Network Service Netlink Socket. > [ 8.086111] systemd[1]: Created slice System Slice. > [ 8.096900] systemd[1]: Created slice system-getty.slice. > [ 8.108199] systemd[1]: Created slice system-systemd\x2dfsck.slice. > [ 8.119569] systemd[1]: Reached target Host and Network Name Lookups. > [ 8.131877] systemd[1]: Set up automount Arbitrary Executable File > Formats File System Automount Point. > [ 8.148462] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. > [ 8.160707] systemd[1]: Listening on Journal Socket. > [ 8.205800] systemd[1]: Mounting NFSD configuration filesystem... > [ 8.227594] systemd[1]: Mounting Temporary Directory... > [ 8.244348] systemd[1]: Mounting Debug File System... > [ 8.329141] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). > [ 8.336622] systemd[1]: Starting Apply Kernel Variables... > [ 8.355160] systemd[1]: Starting Create list of required static > device nodes for the current kernel... > [ 8.374963] systemd[1]: Created slice system-serial\x2dgetty.slice. > [ 8.389358] systemd[1]: Set up automount var-tmp.automount. > [ 8.400550] systemd[1]: Listening on Journal Socket (/dev/log). > [ 8.416301] systemd[1]: Starting Journal Service... > [ 8.431330] systemd[1]: Mounting POSIX Message Queue File System... > [ 8.443806] systemd[1]: Listening on udev Kernel Socket. > [ 8.461486] systemd[1]: Set up automount var-lib-machines.automount. > [ 8.472921] systemd[1]: Reached target Remote File Systems. > [ 8.484929] systemd[1]: Set up automount var-lib-timeshift.automount. > [ 8.496667] systemd[1]: Listening on udev Control Socket. > [ 8.536219] systemd[1]: Starting File System Check on Root Device... > [ 8.552853] systemd[1]: Mounting Configuration File System... > [ 8.574947] systemd[1]: Set up automount var-lib-media.automount. > [ 8.586649] systemd[1]: Started Dispatch Password Requests to > Console Directory Watch. > [ 8.601816] systemd[1]: Reached target Paths. > [ 8.613920] systemd[1]: Set up automount home.automount. > [ 8.649134] systemd[1]: Mounting RPC Pipe File System... > [ 8.667404] systemd[1]: var-cache.automount: Directory /var/cache > to mount over is not empty, mounting anyway. > [ 8.682874] systemd[1]: Set up automount var-cache.automount. > [ 8.699554] systemd[1]: Starting Setup Virtual Console... > [ 8.712784] systemd[1]: Set up automount usr-src.automount. > [ 8.726611] systemd[1]: Created slice Virtual Machine and Container Slice. > [ 8.738565] systemd[1]: Reached target Slices. > [ 8.760905] systemd[1]: Mounted RPC Pipe File System. > [ 8.771255] systemd[1]: Mounted NFSD configuration filesystem. > [ 8.782621] systemd[1]: Mounted Debug File System. > [ 8.791943] systemd[1]: Mounted Configuration File System. > [ 8.802011] systemd[1]: Mounted POSIX Message Queue File System. > [ 8.812401] systemd[1]: Mounted Temporary Directory. > [ 8.822162] systemd[1]: Started Journal Service. > [ 9.263793] sdb: sdb1 > [ 9.271037] sd 1:0:0:0: [sdb] Attached SCSI disk > [ 9.694113] EXT4-fs (mmcblk0p4): re-mounted. Opts: user_xattr > [ 10.166020] systemd-journald[140]: Received request to flush > runtime journal from PID 1 > [ 10.203916] systemd-journald[140]: File > /var/log/journal/18e841ae3401834bac9a7b7f552c54e2/system.journal > corrupted or uncleanly shut down, renaming and replacing. > [ 10.954714] random: nonblocking pool is initialized > [ 11.377094] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer > [ 11.405582] gpiomem-bcm2835 3f200000.gpiomem: Initialised: > Registers at 0x3f200000 > [ 11.601586] media: Linux media interface: v0.10 > [ 11.647655] usbcore: registered new interface driver usbserial > [ 11.662050] usbcore: registered new interface driver usbserial_generic > [ 11.662189] usbserial: USB Serial support registered for generic > [ 11.684888] Linux video capture interface: v2.00 > [ 11.703982] usbcore: registered new interface driver ftdi_sio > [ 11.712179] usbserial: USB Serial support registered for FTDI USB > Serial Device > [ 11.722709] ftdi_sio 1-1.5.4.1:1.0: FTDI USB Serial Device converter detected > [ 11.723148] usb 1-1.5.4.1: Detected FT232BM > [ 11.744651] usb 1-1.5.4.1: FTDI USB Serial Device converter now > attached to ttyUSB0 > [ 11.818055] em28xx: New device PCTV Systems PCTV 290e @ 480 Mbps > (2013:024f, interface 0, class 0) > [ 11.831398] em28xx: DVB interface 0 found: isoc > [ 11.848328] em28xx: chip ID is em28174 > [ 11.883110] Adding 538620k swap on /dev/mmcblk0p2. Priority:-1 > extents:1 across:538620k SSFS > [ 12.200358] em28174 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x11372abd > [ 12.209152] em28174 #0: EEPROM info: > [ 12.214596] em28174 #0: microcode start address = 0x0004, boot > configuration = 0x01 > [ 12.251740] em28174 #0: No audio on board. > [ 12.257883] em28174 #0: 500mA max power > [ 12.257899] em28174 #0: Table at offset 0x39, strings=0x1aa0, > 0x14ba, 0x1ace > [ 12.259264] em28174 #0: Identified as PCTV nanoStick T2 290e (card=78) > [ 12.259277] em28174 #0: dvb set to isoc mode. > [ 12.259551] em28xx: New device PCTV PCTV 292e @ 480 Mbps > (2013:025f, interface 0, class 0) > [ 12.259570] em28xx: DVB interface 0 found: isoc > [ 12.266130] em28xx: chip ID is em28178 > [ 12.345535] EXT4-fs (mmcblk0p3): mounted filesystem with ordered > data mode. Opts: user_xattr > [ 12.596838] EXT4-fs (sdb1): mounted filesystem with ordered data > mode. Opts: (null) > [ 13.762980] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) > initialised: dm-devel@xxxxxxxxxx > [ 14.274644] em28178 #1: EEPROM ID = 26 00 01 00, EEPROM hash = 0x1f10fa04 > [ 14.282826] em28178 #1: EEPROM info: > [ 14.287783] em28178 #1: microcode start address = 0x0004, boot > configuration = 0x01 > [ 14.306006] em28178 #1: AC97 audio (5 sample rates) > [ 14.312539] em28178 #1: 500mA max power > [ 14.318047] em28178 #1: Table at offset 0x27, strings=0x146a, > 0x1888, 0x0a7e > [ 14.328176] em28178 #1: Identified as PCTV tripleStick (292e) (card=94) > [ 14.336473] em28178 #1: dvb set to isoc mode. > [ 14.342834] usbcore: registered new interface driver em28xx > [ 14.357340] em28174 #0: Binding DVB extension > [ 14.399266] tda18271 4-0060: creating new instance > [ 14.410570] TDA18271HD/C2 detected @ 4-0060 > [ 14.756558] DVB: registering new adapter (em28174 #0) > [ 14.763268] usb 1-1.4.2: DVB: registering adapter 0 frontend 0 > (Sony CXD2820R)... > [ 14.776195] em28174 #0: DVB extension successfully initialized > [ 14.783876] em28178 #1: Binding DVB extension > [ 14.808283] i2c i2c-6: Added multiplexed i2c bus 7 > [ 14.814868] si2168 6-0064: Silicon Labs Si2168 successfully attached > [ 14.837222] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 > successfully attached > [ 14.848606] DVB: registering new adapter (em28178 #1) > [ 14.855800] usb 1-1.5.1.1: DVB: registering adapter 1 frontend 0 > (Silicon Labs Si2168)... > [ 14.869703] em28178 #1: DVB extension successfully initialized > [ 14.877665] em28xx: Registered (Em28xx dvb Extension) extension > [ 14.906455] em28174 #0: Registering input extension > [ 14.945534] Registered IR keymap rc-pinnacle-pctv-hd > [ 14.953096] input: em28xx IR (em28174 #0) as > /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4.2/rc/rc0/input0 > [ 14.967517] rc0: em28xx IR (em28174 #0) as > /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4.2/rc/rc0 > [ 14.981732] em28174 #0: Input extension successfully initalized > [ 14.989777] em28178 #1: Registering input extension > [ 14.997418] Registered IR keymap rc-pinnacle-pctv-hd > [ 15.005221] input: em28xx IR (em28178 #1) as > /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1.1/rc/rc1/input1 > [ 15.022477] rc1: em28xx IR (em28178 #1) as > /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1.1/rc/rc1 > [ 15.038312] em28178 #1: Input extension successfully initalized > [ 15.038320] em28xx: Registered (Em28xx Input Extension) extension > [ 18.625037] EXT4-fs (dm-5): mounted filesystem with ordered data > mode. Opts: (null) > [ 18.904147] EXT4-fs (dm-7): mounted filesystem with ordered data > mode. Opts: (null) > [ 19.763065] EXT4-fs (dm-3): mounted filesystem with ordered data > mode. Opts: (null) > [ 20.155434] EXT4-fs (dm-6): mounted filesystem with ordered data > mode. Opts: (null) > [ 21.584845] bridge: automatic filtering via arp/ip/ip6tables has > been deprecated. Update your scripts to load br_netfilter if you need > this. > [ 21.655413] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready > [ 21.669877] IPv6: ADDRCONF(NETDEV_UP): veth-osc: link is not ready > [ 21.684691] device veth-osc-br entered promiscuous mode > [ 21.696320] IPv6: ADDRCONF(NETDEV_UP): veth-tvh: link is not ready > [ 21.709793] device veth-tvh-br entered promiscuous mode > [ 21.723481] device eth0 entered promiscuous mode > [ 21.743625] br0: port 1(veth-osc-br) entered forwarding state > [ 21.751066] br0: port 1(veth-osc-br) entered forwarding state > [ 21.758830] IPv6: ADDRCONF(NETDEV_CHANGE): veth-osc: link becomes ready > [ 21.767316] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready > [ 21.783393] br0: port 2(veth-tvh-br) entered forwarding state > [ 21.790818] br0: port 2(veth-tvh-br) entered forwarding state > [ 21.799774] IPv6: ADDRCONF(NETDEV_CHANGE): veth-tvh: link becomes ready > [ 21.870702] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup > [ 21.880090] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 23.020289] IPv6: ADDRCONF(NETDEV_UP): vb-openhab: link is not ready > [ 23.030581] device vb-openhab entered promiscuous mode > [ 23.402973] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 23.412488] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, > lpa 0xC5E1 > [ 23.424304] br0: port 3(eth0) entered forwarding state > [ 23.431389] br0: port 3(eth0) entered forwarding state > [ 26.209158] EXT4-fs (dm-3): re-mounted. Opts: (null) > [ 29.226801] IPv6: ADDRCONF(NETDEV_CHANGE): vb-openhab: link becomes ready > [ 29.233971] br0: port 4(vb-openhab) entered forwarding state > [ 29.239905] br0: port 4(vb-openhab) entered forwarding state > [ 29.738038] EXT4-fs (dm-0): mounted filesystem with ordered data > mode. Opts: (null) > [ 29.904337] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state > recovery directory > [ 29.918177] NFSD: starting 90-second grace period (net 808b7000) > [ 30.001379] IPv6: ADDRCONF(NETDEV_UP): vb-revproxy: link is not ready > [ 30.010142] device vb-revproxy entered promiscuous mode > [ 30.015858] br0: port 5(vb-revproxy) entered forwarding state > [ 30.021887] br0: port 5(vb-revproxy) entered forwarding state > [ 30.225566] br0: port 5(vb-revproxy) entered disabled state > [ 31.579047] EXT4-fs (dm-4): mounted filesystem with writeback data > mode. Opts: data=writeback > [ 31.773077] IPv6: ADDRCONF(NETDEV_UP): vb-work: link is not ready > [ 31.781629] device vb-work entered promiscuous mode > [ 32.839859] si2168 6-0064: found a 'Silicon Labs Si2168-B40' > [ 32.860644] si2168 6-0064: downloading firmware from file > 'dvb-demod-si2168-b40-01.fw' > [ 33.266380] si2168 6-0064: firmware version: 4.0.11 > [ 33.279683] si2157 7-0060: found a 'Silicon Labs Si2157-A30' > [ 33.339553] si2157 7-0060: firmware version: 3.0.5 > [ 33.347268] usb 1-1.5.1.1: DVB: adapter 1 frontend 0 frequency 0 > out of range (55000000..862000000) > [ 33.717806] tda18271: performing RF tracking filter calibration > [ 33.989991] EXT4-fs (dm-3): re-mounted. Opts: (null) > [ 35.714673] EXT4-fs (dm-3): re-mounted. Opts: (null) > [ 36.652848] tda18271: RF tracking filter calibration complete > [ 36.662836] usb 1-1.4.2: DVB: adapter 0 frontend 0 frequency 0 out > of range (45000000..864000000) > [ 36.765318] br0: port 1(veth-osc-br) entered forwarding state > [ 36.805327] br0: port 2(veth-tvh-br) entered forwarding state > [ 38.445319] br0: port 3(eth0) entered forwarding state > [ 38.974621] IPv6: ADDRCONF(NETDEV_CHANGE): vb-revproxy: link becomes ready > [ 38.984401] br0: port 5(vb-revproxy) entered forwarding state > [ 39.003046] br0: port 5(vb-revproxy) entered forwarding state > [ 44.285322] br0: port 4(vb-openhab) entered forwarding state > [ 45.607032] IPv6: ADDRCONF(NETDEV_CHANGE): vb-work: link becomes ready > [ 45.616358] br0: port 6(vb-work) entered forwarding state > [ 45.634769] br0: port 6(vb-work) entered forwarding state > [ 54.045274] br0: port 5(vb-revproxy) entered forwarding state > [ 60.645283] br0: port 6(vb-work) entered forwarding state Did you skip any lines here ? Any usb related messages ? > [93038.637557] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93038.737581] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) -5 is -EIO, which means the errors occure at usb level (line 176 in em28xx-core.c) However, the actual error returned by usb_control_msg() might be different, because it is passed through usb_translate_errors(). Hth, Frank > [93038.746399] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93039.247560] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93039.447579] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93039.647559] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93039.847564] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93040.047567] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93040.157570] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93040.165915] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93041.047583] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93041.167571] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93041.175973] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93042.047587] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93042.177582] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93042.185886] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93043.047590] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93043.187592] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93043.195868] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93044.047593] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93044.197589] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93044.205925] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93045.047597] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93045.207593] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93045.215996] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93046.117605] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93046.217617] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93046.226038] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93047.127686] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93048.127607] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93049.127649] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93050.127623] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93051.127653] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93052.127661] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93053.127629] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93054.127676] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93055.127642] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93055.567657] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93055.627642] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93055.635697] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93055.737670] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93055.745838] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93055.767696] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93055.937644] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93055.945765] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93056.357654] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93056.365873] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93056.557660] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93056.565881] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93056.767668] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93056.957643] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93056.965832] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93057.167651] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93057.175940] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93057.367717] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93057.376095] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93057.777671] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93057.877684] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93057.886233] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93057.987666] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93057.996402] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93058.187711] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93058.196628] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93058.787667] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93058.797684] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93058.806676] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93059.007688] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93059.016688] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93059.117682] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93059.126734] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93059.617670] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93059.626716] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93059.787721] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93059.827708] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93059.836680] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93060.027687] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93060.036769] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93060.437671] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93060.446730] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93060.637691] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93060.646762] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93060.787678] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93061.247687] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93061.256728] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93061.457707] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93061.466757] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93061.787676] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93062.067704] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93062.076679] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93062.277708] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93062.286757] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93062.787684] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93062.887741] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93062.896722] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93063.097697] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93063.106681] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93063.707702] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93063.716684] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93063.787713] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93063.917702] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93063.926670] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93064.527694] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93064.536728] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93064.727715] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93064.736761] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93064.787702] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93065.337687] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93065.346584] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93065.547711] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93065.556702] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93065.787716] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93066.157718] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93066.166619] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93066.367727] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93066.376707] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93066.787692] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93066.977718] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93066.986601] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93067.187761] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93067.196740] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93067.787706] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93067.797724] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93067.806628] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93068.007766] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93068.016675] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93068.617717] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93068.626697] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93068.787718] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93068.827782] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93068.836721] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93069.437700] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93069.437758] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93069.537875] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93069.547209] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93069.787818] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93070.137740] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93070.146672] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93070.337717] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93070.346726] i2c i2c-4: cxd2820r: i2c rd failed=-5 reg=10 len=1 > [93070.567756] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93070.576794] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93070.587886] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93070.767728] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93070.776740] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=00 len=1 > [93070.787804] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93070.967719] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93070.976604] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=00 len=1 > [93071.377727] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93071.386766] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93071.577712] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93071.586734] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=00 len=1 > [93071.797738] em28178 #1: writing to i2c device at 0xc8 failed (error=-5) > [93071.977728] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93071.986610] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=00 len=1 > [93072.187722] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93072.196762] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=85 len=1 > [93072.387752] em28174 #0: writing to i2c device at 0xd8 failed (error=-5) > [93072.396784] i2c i2c-4: cxd2820r: i2c wr failed=-5 reg=00 len=1 > [93072.807813] em28178 #1: writing to i2c device at 0xc8 failed (error=-5)
