Benjamin Valentin wrote:
Am Fri, 23 Oct 2009 12:08:22 -0400
schrieb Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>:
You cannot use a saa7162 based device with the saa7164 driver. They
chipsets are too dissimilar.
This was why I tried the saa716x driver [1] that should work for
saa7160, saa7161 and saa7162 based devices.
However, after downloading and compiling the driver and loading all
saa716x_* modules, there was no /dev/dvb nor /dev/video, neither were
there any messages from saa716x in dmesg (but lsmod did show them up as
loaded) Despite
MAKE_ENTRY(NXP_REFERENCE_BOARD, PCI_ANY_ID, SAA7162,&saa716x_atlantis_config)
should have been true for my card as far as I understand, I've added
#define PINNACLE 0x1131
#define PINNACLE_PCTV_7010IX 0x7162
MAKE_ENTRY(PINNACLE, PINNACLE_PCTV_7010IX, SAA7162, &saa716x_atlantis_config)
with no change after repeating the procedure (and unloading the
saa716x_hybrid module of cause)
lspci oddly recognizes the board as Pinnacle PCTV 3010iX, which only
has one tuner module.
I've included lspci and dmesg output.
I'm looking forward for someone who could explain what is happening
here and what I may do about it.
Best regards
benjamin
[1] http://jusst.de/hg/saa716x/
[2] http://www.computerbase.de/bildstrecke/14665/2/
sorry for forking out another discussion.
I am curious to know the status of saa716x driver, because I have a
DMB-TH card with saa7160, does it has i2c and TS port working?
regards,
David
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
