Hi Mauro,
That isn't problem. Would it help you, if I send this patch as attachment?
Regards,
Lukas
Dne Út 27. října 2009 13:06:22 jste napsal(a):
> Hi Kukáš,
>
> Your patch were line-wrapped, so, I can't apply it. Could you please
> re-submit if it weren't already merged?
>
> Cheers,
> Mauro.
>
> Em Thu, 10 Sep 2009 14:12:07 +0200
>
> Lukáš Karas <lukas.karas@xxxxxxxxxx> escreveu:
> > Hi all, here is patch for driver saa7134, that add support for IR
> > reciever on card LifeView FlyDVB Trio.
> >
> > I tested it on kernel 2.6.30
> >
> >
> > Signed-off-by: Lukas Karas <lukas.karas@xxxxxxxxxx>
> > diff -uprN video.13c47deee3b1/ir-kbd-i2c.c video/ir-kbd-i2c.c
> > --- video.13c47deee3b1/ir-kbd-i2c.c 2009-09-07 15:38:46.000000000 +0200
> > +++ video/ir-kbd-i2c.c 2009-09-08 22:23:34.000000000 +0200
> > @@ -438,6 +438,7 @@ static int ir_probe(struct i2c_client *c
> > ir_type = IR_TYPE_RC5;
> > ir_codes = &ir_codes_fusionhdtv_mce_table;
> > break;
> > + case 0x0b:
> > case 0x7a:
> > case 0x47:
> > case 0x71:
> > @@ -467,7 +468,7 @@ static int ir_probe(struct i2c_client *c
> > ir_codes = &ir_codes_avermedia_cardbus_table;
> > break;
> > default:
> > - dprintk(1, DEVNAME ": Unsupported i2c address 0x%02x\n", addr);
> > + dprintk(1, "Unsupported i2c address 0x%02x\n", addr);
> > err = -ENODEV;
> > goto err_out_free;
> > }
> > @@ -514,7 +515,7 @@ static int ir_probe(struct i2c_client *c
> >
> > /* Make sure we are all setup before going on */
> > if (!name || !ir->get_key || !ir_codes) {
> > - dprintk(1, DEVNAME ": Unsupported device at address 0x%02x\n",
> > + dprintk(1, "Unsupported device at address 0x%02x\n",
> > addr);
> > err = -ENODEV;
> > goto err_out_free;
> > @@ -722,6 +723,30 @@ static int ir_probe(struct i2c_adapter *
> > ir_attach(adap, msg[0].addr, 0, 0);
> > }
> >
> > + /* special case for LifeView FlyDVB Trio */
> > + if (adap->id == I2C_HW_SAA7134) {
> > + u8 temp = 0;
> > + msg.buf = &temp;
> > + msg.addr = 0x0b;
> > + msg.len = 1;
> > + msg.flags = 0;
> > +
> > + /* send weak up message to pic16C505 chip @ LifeView FlyDVB Trio */
> > + if (1 != i2c_transfer(adap,&msg,1)) {
> > + dprintk(1,"send wake up byte to pic16C505 failed\n");
> > + }else{
> > + msg.flags = I2C_M_RD;
> > + rc = i2c_transfer(adap, &msg, 1);
> > + dprintk(1, "probe 0x%02x @ %s: %s\n",
> > + msg.addr, adap->name,
> > + (1 == rc) ? "yes" : "no");
> > + if (1 == rc)
> > + ir_attach(adap, msg.addr, 0, 0);
> > + }
> > + msg.len = 0;
> > + msg.flags = I2C_M_RD;
> > + }
> > +
> > return 0;
> > }
> > #else
> > diff -uprN video.13c47deee3b1/saa7134/saa7134-cards.c
> > video/saa7134/saa7134- cards.c
> > --- video.13c47deee3b1/saa7134/saa7134-cards.c 2009-09-07
> > 15:38:46.000000000 +0200
> > +++ video/saa7134/saa7134-cards.c 2009-09-09 00:45:09.000000000 +0200
> > @@ -7212,9 +7212,27 @@ int saa7134_board_init2(struct saa7134_d
> > }
> > case SAA7134_BOARD_FLYDVB_TRIO:
> > {
> > + u8 temp = 0;
> > + int rc;
> > u8 data[] = { 0x3c, 0x33, 0x62};
> > struct i2c_msg msg = {.addr=0x09, .flags=0, .buf=data, .len =
> > sizeof(data)}; i2c_transfer(&dev->i2c_adap, &msg, 1);
> > +
> > + /* send weak up message to pic16C505 chip @ LifeView FlyDVB Trio */
> > + msg.buf = &temp;
> > + msg.addr = 0x0b;
> > + msg.len = 1;
> > + if (1 != i2c_transfer(&dev->i2c_adap,&msg,1)) {
> > + printk(KERN_WARNING "%s: send wake up byte to pic16C505
> > + (IR chip) failed\n", dev->name);
> > + }else{
> > + msg.flags = I2C_M_RD;
> > + rc = i2c_transfer(&dev->i2c_adap, &msg, 1);
> > + printk(KERN_INFO "%s: probe IR chip @ i2c 0x%02x: %s\n",
> > + dev->name, msg.addr,(1 == rc) ? "yes" : "no");
> > + if (rc == 1)
> > + dev->has_remote = SAA7134_REMOTE_I2C;
> > + }
> > break;
> > }
> > case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
> > diff -uprN video.13c47deee3b1/saa7134/saa7134-input.c
> > video/saa7134/saa7134- input.c
> > --- video.13c47deee3b1/saa7134/saa7134-input.c 2009-09-07
> > 15:38:46.000000000 +0200
> > +++ video/saa7134/saa7134-input.c 2009-09-08 22:56:02.000000000 +0200
> > @@ -132,6 +132,72 @@ static int build_key(struct saa7134_dev
> >
> > /* --------------------- Chip specific I2C key builders
> > ----------------- */
> >
> > +static int get_key_flydvb_trio(struct IR_i2c *ir, u32 *ir_key, u32
> > *ir_raw) +{
> > + int gpio;
> > + int attempt = 0;
> > + unsigned char b;
> > +
> > + /* We need this to access GPI Used by the saa_readl macro. */
> > +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
> > + struct saa7134_dev *dev = ir->c.adapter->algo_data;
> > +#else
> > + struct saa7134_dev *dev = ir->c->adapter->algo_data;
> > +#endif
> > +
> > + if (dev == NULL) {
> > + dprintk ("get_key_flydvb_trio: "
> > +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
> > + "gir->c.adapter->algo_data is NULL!\n");
> > +#else
> > + "gir->c->adapter->algo_data is NULL!\n");
> > +#endif
> > + return -EIO;
> > + }
> > +
> > + /* rising SAA7134_GPIGPRESCAN reads the status */
> > + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
> > + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
> > +
> > + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
> > +
> > + if (0x40000 &~ gpio)
> > + return 0; /* No button press */
> > +
> > + /* No button press - only before first key pressed */
> > + if (b == 0xFF)
> > + return 0;
> > +
> > + /* poll IR chip */
> > + /* weak up the IR chip */
> > + b = 0;
> > +
> > +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
> > + while(1 != i2c_master_send(&ir->c, &b,1)) {
> > +#else
> > + while(1 != i2c_master_send(ir->c, &b,1)) {
> > +#endif
> > + if ((attempt++) < 10){
> > + msleep(10); /* wait a bit for next attempt - I don't know how make it
> > better */
> > + continue;
> > + }
> > + i2cdprintk("send wake up byte to pic16C505 (IR chip)
> > + failed %dx\n", attempt);
> > + return -EIO;
> > + }
> > +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
> > + if (1 != i2c_master_recv(&ir->c, &b, 1)) {
> > +#else
> > + if (1 != i2c_master_recv(ir->c, &b, 1)) {
> > +#endif
> > + i2cdprintk("read error\n");
> > + return -EIO;
> > + }
> > +
> > + *ir_key = b;
> > + *ir_raw = b;
> > + return 1;
> > +}
> > +
> > static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
> > u32 *ir_raw)
> > {
> > @@ -874,6 +940,18 @@ void saa7134_probe_i2c_ir(struct saa7134
> > dev->info.addr = 0x40;
> > #endif
> > break;
> > + case SAA7134_BOARD_FLYDVB_TRIO:
> > +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
> > + snprintf(ir->c.name, sizeof(ir->c.name), "FlyDVB Trio");
> > + ir->get_key = get_key_flydvb_trio;
> > + ir->ir_codes = ir_codes_flydvb_table;
> > +#else
> > + dev->init_data.name = "FlyDVB Trio";
> > + dev->init_data.get_key = get_key_flydvb_trio;
> > + dev->init_data.ir_codes = &ir_codes_flydvb_table;
> > + dev->info.addr = 0x0b;
> > +#endif
> > + break;
> > }
> >
> > #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30)
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-media" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> Cheers,
> Mauro
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Signed-off-by: Lukas Karas <lukas.karas@xxxxxxxxxx>
diff -uprN video.29e4ba1a09bc/ir-kbd-i2c.c video/ir-kbd-i2c.c
--- video.29e4ba1a09bc/ir-kbd-i2c.c 2009-09-19 14:45:22.000000000 +0200
+++ video/ir-kbd-i2c.c 2009-09-21 20:59:30.000000000 +0200
@@ -438,6 +441,7 @@ static int ir_probe(struct i2c_client *c
ir_type = IR_TYPE_RC5;
ir_codes = &ir_codes_fusionhdtv_mce_table;
break;
+ case 0x0b:
case 0x7a:
case 0x47:
case 0x71:
@@ -467,7 +471,7 @@ static int ir_probe(struct i2c_client *c
ir_codes = &ir_codes_avermedia_cardbus_table;
break;
default:
- dprintk(1, DEVNAME ": Unsupported i2c address 0x%02x\n", addr);
+ dprintk(1, ": Unsupported i2c address 0x%02x\n", addr);
err = -ENODEV;
goto err_out_free;
}
@@ -514,7 +518,7 @@ static int ir_probe(struct i2c_client *c
/* Make sure we are all setup before going on */
if (!name || !ir->get_key || !ir_codes) {
- dprintk(1, DEVNAME ": Unsupported device at address 0x%02x\n",
+ dprintk(1,": Unsupported device at address 0x%02x\n",
addr);
err = -ENODEV;
goto err_out_free;
@@ -722,6 +726,30 @@ static int ir_probe(struct i2c_adapter *
ir_attach(adap, msg[0].addr, 0, 0);
}
+ /* special case for LifeView FlyDVB Trio */
+ if (adap->id == I2C_HW_SAA7134) {
+ u8 temp = 0;
+ msg.buf = &temp;
+ msg.addr = 0x0b;
+ msg.len = 1;
+ msg.flags = 0;
+
+ /* send weak up message to pic16C505 chip @ LifeView FlyDVB Trio */
+ if (1 != i2c_transfer(adap,&msg,1)) {
+ dprintk(1,"send wake up byte to pic16C505 failed\n");
+ }else{
+ msg.flags = I2C_M_RD;
+ rc = i2c_transfer(adap, &msg, 1);
+ dprintk(1, "probe 0x%02x @ %s: %s\n",
+ msg.addr, adap->name,
+ (1 == rc) ? "yes" : "no");
+ if (1 == rc)
+ ir_attach(adap, msg.addr, 0, 0);
+ }
+ msg.len = 0;
+ msg.flags = I2C_M_RD;
+ }
+
return 0;
}
#else
diff -uprN video.29e4ba1a09bc/saa7134/saa7134-cards.c video/saa7134/saa7134-cards.c
--- video.29e4ba1a09bc/saa7134/saa7134-cards.c 2009-09-19 14:45:22.000000000 +0200
+++ video/saa7134/saa7134-cards.c 2009-09-21 20:34:48.000000000 +0200
@@ -7239,9 +7239,27 @@ int saa7134_board_init2(struct saa7134_d
}
case SAA7134_BOARD_FLYDVB_TRIO:
{
+ u8 temp = 0;
+ int rc;
u8 data[] = { 0x3c, 0x33, 0x62};
struct i2c_msg msg = {.addr=0x09, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
+
+ /* send weak up message to pic16C505 chip @ LifeView FlyDVB Trio */
+ msg.buf = &temp;
+ msg.addr = 0x0b;
+ msg.len = 1;
+ if (1 != i2c_transfer(&dev->i2c_adap,&msg,1)) {
+ printk(KERN_WARNING "%s: send wake up byte to pic16C505"
+ "(IR chip) failed\n", dev->name);
+ }else{
+ msg.flags = I2C_M_RD;
+ rc = i2c_transfer(&dev->i2c_adap, &msg, 1);
+ printk(KERN_INFO "%s: probe IR chip @ i2c 0x%02x: %s\n",
+ dev->name, msg.addr,(1 == rc) ? "yes" : "no");
+ if (rc == 1)
+ dev->has_remote = SAA7134_REMOTE_I2C;
+ }
break;
}
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
diff -uprN video.29e4ba1a09bc/saa7134/saa7134-input.c video/saa7134/saa7134-input.c
--- video.29e4ba1a09bc/saa7134/saa7134-input.c 2009-09-19 14:45:22.000000000 +0200
+++ video/saa7134/saa7134-input.c 2009-09-21 20:35:39.000000000 +0200
@@ -132,6 +132,74 @@ static int build_key(struct saa7134_dev
/* --------------------- Chip specific I2C key builders ----------------- */
+static int get_key_flydvb_trio(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+ int gpio;
+ int attempt = 0;
+ unsigned char b;
+
+ /* We need this to access GPI Used by the saa_readl macro. */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
+ struct saa7134_dev *dev = ir->c.adapter->algo_data;
+#else
+ struct saa7134_dev *dev = ir->c->adapter->algo_data;
+#endif
+
+ if (dev == NULL) {
+ dprintk ("get_key_flydvb_trio: "
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
+ "gir->c.adapter->algo_data is NULL!\n");
+#else
+ "gir->c->adapter->algo_data is NULL!\n");
+#endif
+ return -EIO;
+ }
+
+ /* rising SAA7134_GPIGPRESCAN reads the status */
+ saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+ saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+
+ gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
+
+ if (0x40000 &~ gpio)
+ return 0; /* No button press */
+
+ /* No button press - only before first key pressed */
+ if (b == 0xFF)
+ return 0;
+
+ /* poll IR chip */
+ /* weak up the IR chip */
+ b = 0;
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
+ while(1 != i2c_master_send(&ir->c, &b,1)) {
+#else
+ while(1 != i2c_master_send(ir->c, &b,1)) {
+#endif
+ if ((attempt++) < 10){
+ msleep(10); /* wait a bit for next attempt - I don't know
+ how make it better */
+ continue;
+ }
+ i2cdprintk("send wake up byte to pic16C505 (IR chip)"
+ "failed %dx\n", attempt);
+ return -EIO;
+ }
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
+ if (1 != i2c_master_recv(&ir->c, &b, 1)) {
+#else
+ if (1 != i2c_master_recv(ir->c, &b, 1)) {
+#endif
+ i2cdprintk("read error\n");
+ return -EIO;
+ }
+
+ *ir_key = b;
+ *ir_raw = b;
+ return 1;
+}
+
static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
u32 *ir_raw)
{
@@ -878,6 +946,18 @@ void saa7134_probe_i2c_ir(struct saa7134
dev->info.addr = 0x40;
#endif
break;
+ case SAA7134_BOARD_FLYDVB_TRIO:
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
+ snprintf(ir->c.name, sizeof(ir->c.name), "FlyDVB Trio");
+ ir->get_key = get_key_flydvb_trio;
+ ir->ir_codes = ir_codes_flydvb_table;
+#else
+ dev->init_data.name = "FlyDVB Trio";
+ dev->init_data.get_key = get_key_flydvb_trio;
+ dev->init_data.ir_codes = &ir_codes_flydvb_table;
+ dev->info.addr = 0x0b;
+#endif
+ break;
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30)
