Hi Kukáš,
Your patch were line-wrapped, so, I can't apply it. Could you please re-submit
if it weren't already merged?
Cheers,
Mauro.
Em Thu, 10 Sep 2009 14:12:07 +0200
Lukáš Karas <lukas.karas@xxxxxxxxxx> escreveu:
> Hi all, here is patch for driver saa7134, that add support for IR reciever
> on card LifeView FlyDVB Trio.
>
> I tested it on kernel 2.6.30
>
>
> Signed-off-by: Lukas Karas <lukas.karas@xxxxxxxxxx>
> diff -uprN video.13c47deee3b1/ir-kbd-i2c.c video/ir-kbd-i2c.c
> --- video.13c47deee3b1/ir-kbd-i2c.c 2009-09-07 15:38:46.000000000 +0200
> +++ video/ir-kbd-i2c.c 2009-09-08 22:23:34.000000000 +0200
> @@ -438,6 +438,7 @@ static int ir_probe(struct i2c_client *c
> ir_type = IR_TYPE_RC5;
> ir_codes = &ir_codes_fusionhdtv_mce_table;
> break;
> + case 0x0b:
> case 0x7a:
> case 0x47:
> case 0x71:
> @@ -467,7 +468,7 @@ static int ir_probe(struct i2c_client *c
> ir_codes = &ir_codes_avermedia_cardbus_table;
> break;
> default:
> - dprintk(1, DEVNAME ": Unsupported i2c address 0x%02x\n", addr);
> + dprintk(1, "Unsupported i2c address 0x%02x\n", addr);
> err = -ENODEV;
> goto err_out_free;
> }
> @@ -514,7 +515,7 @@ static int ir_probe(struct i2c_client *c
>
> /* Make sure we are all setup before going on */
> if (!name || !ir->get_key || !ir_codes) {
> - dprintk(1, DEVNAME ": Unsupported device at address 0x%02x\n",
> + dprintk(1, "Unsupported device at address 0x%02x\n",
> addr);
> err = -ENODEV;
> goto err_out_free;
> @@ -722,6 +723,30 @@ static int ir_probe(struct i2c_adapter *
> ir_attach(adap, msg[0].addr, 0, 0);
> }
>
> + /* special case for LifeView FlyDVB Trio */
> + if (adap->id == I2C_HW_SAA7134) {
> + u8 temp = 0;
> + msg.buf = &temp;
> + msg.addr = 0x0b;
> + msg.len = 1;
> + msg.flags = 0;
> +
> + /* send weak up message to pic16C505 chip @ LifeView FlyDVB Trio */
> + if (1 != i2c_transfer(adap,&msg,1)) {
> + dprintk(1,"send wake up byte to pic16C505 failed\n");
> + }else{
> + msg.flags = I2C_M_RD;
> + rc = i2c_transfer(adap, &msg, 1);
> + dprintk(1, "probe 0x%02x @ %s: %s\n",
> + msg.addr, adap->name,
> + (1 == rc) ? "yes" : "no");
> + if (1 == rc)
> + ir_attach(adap, msg.addr, 0, 0);
> + }
> + msg.len = 0;
> + msg.flags = I2C_M_RD;
> + }
> +
> return 0;
> }
> #else
> diff -uprN video.13c47deee3b1/saa7134/saa7134-cards.c video/saa7134/saa7134-
> cards.c
> --- video.13c47deee3b1/saa7134/saa7134-cards.c 2009-09-07 15:38:46.000000000
> +0200
> +++ video/saa7134/saa7134-cards.c 2009-09-09 00:45:09.000000000 +0200
> @@ -7212,9 +7212,27 @@ int saa7134_board_init2(struct saa7134_d
> }
> case SAA7134_BOARD_FLYDVB_TRIO:
> {
> + u8 temp = 0;
> + int rc;
> u8 data[] = { 0x3c, 0x33, 0x62};
> struct i2c_msg msg = {.addr=0x09, .flags=0, .buf=data, .len = sizeof(data)};
> i2c_transfer(&dev->i2c_adap, &msg, 1);
> +
> + /* send weak up message to pic16C505 chip @ LifeView FlyDVB Trio */
> + msg.buf = &temp;
> + msg.addr = 0x0b;
> + msg.len = 1;
> + if (1 != i2c_transfer(&dev->i2c_adap,&msg,1)) {
> + printk(KERN_WARNING "%s: send wake up byte to pic16C505
> + (IR chip) failed\n", dev->name);
> + }else{
> + msg.flags = I2C_M_RD;
> + rc = i2c_transfer(&dev->i2c_adap, &msg, 1);
> + printk(KERN_INFO "%s: probe IR chip @ i2c 0x%02x: %s\n",
> + dev->name, msg.addr,(1 == rc) ? "yes" : "no");
> + if (rc == 1)
> + dev->has_remote = SAA7134_REMOTE_I2C;
> + }
> break;
> }
> case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
> diff -uprN video.13c47deee3b1/saa7134/saa7134-input.c video/saa7134/saa7134-
> input.c
> --- video.13c47deee3b1/saa7134/saa7134-input.c 2009-09-07 15:38:46.000000000
> +0200
> +++ video/saa7134/saa7134-input.c 2009-09-08 22:56:02.000000000 +0200
> @@ -132,6 +132,72 @@ static int build_key(struct saa7134_dev
>
> /* --------------------- Chip specific I2C key builders ----------------- */
>
> +static int get_key_flydvb_trio(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
> +{
> + int gpio;
> + int attempt = 0;
> + unsigned char b;
> +
> + /* We need this to access GPI Used by the saa_readl macro. */
> +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
> + struct saa7134_dev *dev = ir->c.adapter->algo_data;
> +#else
> + struct saa7134_dev *dev = ir->c->adapter->algo_data;
> +#endif
> +
> + if (dev == NULL) {
> + dprintk ("get_key_flydvb_trio: "
> +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
> + "gir->c.adapter->algo_data is NULL!\n");
> +#else
> + "gir->c->adapter->algo_data is NULL!\n");
> +#endif
> + return -EIO;
> + }
> +
> + /* rising SAA7134_GPIGPRESCAN reads the status */
> + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
> + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
> +
> + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
> +
> + if (0x40000 &~ gpio)
> + return 0; /* No button press */
> +
> + /* No button press - only before first key pressed */
> + if (b == 0xFF)
> + return 0;
> +
> + /* poll IR chip */
> + /* weak up the IR chip */
> + b = 0;
> +
> +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
> + while(1 != i2c_master_send(&ir->c, &b,1)) {
> +#else
> + while(1 != i2c_master_send(ir->c, &b,1)) {
> +#endif
> + if ((attempt++) < 10){
> + msleep(10); /* wait a bit for next attempt - I don't know how make it
> better */
> + continue;
> + }
> + i2cdprintk("send wake up byte to pic16C505 (IR chip)
> + failed %dx\n", attempt);
> + return -EIO;
> + }
> +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
> + if (1 != i2c_master_recv(&ir->c, &b, 1)) {
> +#else
> + if (1 != i2c_master_recv(ir->c, &b, 1)) {
> +#endif
> + i2cdprintk("read error\n");
> + return -EIO;
> + }
> +
> + *ir_key = b;
> + *ir_raw = b;
> + return 1;
> +}
> +
> static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
> u32 *ir_raw)
> {
> @@ -874,6 +940,18 @@ void saa7134_probe_i2c_ir(struct saa7134
> dev->info.addr = 0x40;
> #endif
> break;
> + case SAA7134_BOARD_FLYDVB_TRIO:
> +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
> + snprintf(ir->c.name, sizeof(ir->c.name), "FlyDVB Trio");
> + ir->get_key = get_key_flydvb_trio;
> + ir->ir_codes = ir_codes_flydvb_table;
> +#else
> + dev->init_data.name = "FlyDVB Trio";
> + dev->init_data.get_key = get_key_flydvb_trio;
> + dev->init_data.ir_codes = &ir_codes_flydvb_table;
> + dev->info.addr = 0x0b;
> +#endif
> + break;
> }
>
> #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
