i2c bus is already needed when the frontend is probed,
so init it already in it930x_frontend_attach
That prevents errors like
si2168: probe of 6-0067 failed with error -5
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
---
drivers/media/usb/dvb-usb-v2/af9035.c | 43 ++++++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index 4df9486..a95f4b2 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -1214,8 +1214,49 @@ static int it930x_frontend_attach(struct dvb_usb_adapter *adap)
struct si2168_config si2168_config;
struct i2c_adapter *adapter;
- dev_dbg(&intf->dev, "adap->id=%d\n", adap->id);
+ dev_dbg(&intf->dev, "%s adap->id=%d\n", __func__, adap->id);
+
+ /* I2C master bus 2 clock speed 300k */
+ ret = af9035_wr_reg(d, 0x00f6a7, 0x07);
+ if (ret < 0)
+ goto err;
+
+ /* I2C master bus 1,3 clock speed 300k */
+ ret = af9035_wr_reg(d, 0x00f103, 0x07);
+ if (ret < 0)
+ goto err;
+
+ /* set gpio11 low */
+ ret = af9035_wr_reg_mask(d, 0xd8d4, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8d5, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8d3, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+ /* Tuner enable using gpiot2_en, gpiot2_on and gpiot2_o (reset) */
+ ret = af9035_wr_reg_mask(d, 0xd8b8, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8b9, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8b7, 0x00, 0x01);
+ if (ret < 0)
+ goto err;
+
+ msleep(200);
+
+ ret = af9035_wr_reg_mask(d, 0xd8b7, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
memset(&si2168_config, 0, sizeof(si2168_config));
si2168_config.i2c_adapter = &adapter;
si2168_config.fe = &adap->fe[0];
--
2.1.4
