On Sat, Feb 25, 2017 at 02:08:39AM +1100, Vincent McIntyre wrote: > On 2/22/17, Sean Young <sean@xxxxxxxx> wrote: > > > So it's still using the old keymap. I've attached a new one. > > That works, thanks. > > >> # vol down > >> 1487676637.746348: event type EV_MSC(0x04): scancode = 0xffff0105 > >> 1487676637.746348: event type EV_SYN(0x00). > >> # vol up > >> 1487676642.746321: event type EV_MSC(0x04): scancode = 0xffff0115 > >> 1487676642.746321: event type EV_SYN(0x00). > > > > Oops, that's a bug. 0xffff should be 0x0000. I've attached a new version of > > the patch which should fix that. > > > > I am still getting the high bits set. I checked the code and the patch > was correctly applied, > I see where you are applying a 0xff mask to the ircode values. > > > Test run: > # Found /sys/class/rc/rc0/ (/dev/input/event5) with: > Driver imon, table rc-imon-mce > Supported protocols: rc-6 > Enabled protocols: rc-6 > Name: iMON Remote (15c2:ffdc) > bus: 3, vendor/product: 15c2:ffdc, version: 0x0000 > Repeat delay = 500 ms, repeat period = 125 ms > Found /sys/class/rc/rc1/ (/dev/input/event15) with: > Driver dvb_usb_cxusb, table rc-dvico-mce > Supported protocols: nec > Enabled protocols: > Name: IR-receiver inside an USB DVB re > bus: 3, vendor/product: 0fe9:db78, version: 0x827b > Repeat delay = 500 ms, repeat period = 125 ms > Found /sys/class/rc/rc2/ (/dev/input/event16) with: > Driver dvb_usb_af9035, table rc-empty > Supported protocols: nec > Enabled protocols: > Name: Leadtek WinFast DTV Dongle Dual > bus: 3, vendor/product: 0413:6a05, version: 0x0200 > Repeat delay = 500 ms, repeat period = 125 ms > > # ir-keytable -r -t -d /dev/input/event15 > scancode 0x0101 = KEY_RECORD (0xa7) > scancode 0x0102 = KEY_TV (0x179) > scancode 0x0103 = KEY_0 (0x0b) > scancode 0x0105 = KEY_VOLUMEDOWN (0x72) > scancode 0x0107 = KEY_4 (0x05) > scancode 0x0109 = KEY_CHANNELDOWN (0x193) > scancode 0x010a = KEY_EPG (0x16d) > scancode 0x010b = KEY_1 (0x02) > scancode 0x010d = KEY_STOP (0x80) > scancode 0x010e = KEY_MP3 (0x187) > scancode 0x010f = KEY_PREVIOUSSONG (0xa5) > scancode 0x0111 = KEY_CHANNELUP (0x192) > scancode 0x0112 = KEY_NEXTSONG (0xa3) > scancode 0x0113 = KEY_ANGLE (0x173) > scancode 0x0115 = KEY_VOLUMEUP (0x73) > scancode 0x0116 = KEY_SETUP (0x8d) > scancode 0x0117 = KEY_2 (0x03) > scancode 0x0119 = KEY_OPEN (0x86) > scancode 0x011a = KEY_DVD (0x185) > scancode 0x011b = KEY_3 (0x04) > scancode 0x011e = KEY_FAVORITES (0x16c) > scancode 0x011f = KEY_ZOOM (0x174) > scancode 0x0142 = KEY_ENTER (0x1c) > scancode 0x0143 = KEY_REWIND (0xa8) > scancode 0x0146 = KEY_POWER2 (0x164) > scancode 0x0147 = KEY_PLAYPAUSE (0xa4) > scancode 0x0148 = KEY_7 (0x08) > scancode 0x0149 = KEY_BACK (0x9e) > scancode 0x014c = KEY_8 (0x09) > scancode 0x014d = KEY_MENU (0x8b) > scancode 0x014e = KEY_POWER (0x74) > scancode 0x014f = KEY_FASTFORWARD (0xd0) > scancode 0x0150 = KEY_5 (0x06) > scancode 0x0151 = KEY_UP (0x67) > scancode 0x0152 = KEY_CAMERA (0xd4) > scancode 0x0153 = KEY_DOWN (0x6c) > scancode 0x0154 = KEY_6 (0x07) > scancode 0x0155 = KEY_TAB (0x0f) > scancode 0x0157 = KEY_MUTE (0x71) > scancode 0x0158 = KEY_9 (0x0a) > scancode 0x0159 = KEY_INFO (0x166) > scancode 0x015a = KEY_TUNER (0x182) > scancode 0x015b = KEY_LEFT (0x69) > scancode 0x015e = KEY_OK (0x160) > scancode 0x015f = KEY_RIGHT (0x6a) > Enabled protocols: other jvc sony nec sanyo mce-kbd rc-6 sharp xmp > Testing events. Please, press CTRL-C to abort. > # '1' > 1487948112.709532: event type EV_MSC(0x04): scancode = 0xffff010b > 1487948112.709532: event type EV_SYN(0x00). > # '2' > 1487948137.229455: event type EV_MSC(0x04): scancode = 0xffff0117 > 1487948137.229455: event type EV_SYN(0x00). > # '8' > 1487948233.341489: event type EV_MSC(0x04): scancode = 0xffff014c > 1487948233.341489: event type EV_SYN(0x00). > # '9' > 1487948248.417547: event type EV_MSC(0x04): scancode = 0xffff0158 > 1487948248.417547: event type EV_SYN(0x00). > # volume_down > 1487948270.537497: event type EV_MSC(0x04): scancode = 0xffff0105 > 1487948270.537497: event type EV_SYN(0x00). > # volume_up > 1487948464.425435: event type EV_MSC(0x04): scancode = 0xffff0115 > 1487948464.425435: event type EV_SYN(0x00). Sorry Vincent, but are you sure you're running the patch with the & 0xff mask? That should have solved it. Sean
