Hi Vincent, Thanks for testing this. On Fri, Feb 17, 2017 at 12:05:50AM +1100, Vincent McIntyre wrote: > Hi again > > after you kindly fixed media_build for me I applied the nec protocol > patch and tried again. > > $ sudo ir-keytable > Found /sys/class/rc/rc0/ (/dev/input/event5) with: > Driver imon, table rc-imon-mce > Supported protocols: rc-6 > Enabled protocols: rc-6 > Name: iMON Remote (15c2:ffdc) > bus: 3, vendor/product: 15c2:ffdc, version: 0x0000 > Repeat delay = 500 ms, repeat period = 125 ms > Found /sys/class/rc/rc1/ (/dev/input/event11) with: > Driver dvb_usb_cxusb, table rc-dvico-mce > Supported protocols: nec > Enabled protocols: > Name: IR-receiver inside an USB DVB re > bus: 3, vendor/product: 0fe9:db78, version: 0x827b > Repeat delay = 500 ms, repeat period = 125 ms > Found /sys/class/rc/rc2/ (/dev/input/event16) with: > Driver dvb_usb_af9035, table rc-empty > Supported protocols: nec > Enabled protocols: > Name: Leadtek WinFast DTV Dongle Dual > bus: 3, vendor/product: 0413:6a05, version: 0x0200 > Repeat delay = 500 ms, repeat period = 125 ms > > $ sudo ir-keytable -v --sysdev rc1 > Found device /sys/class/rc/rc0/ > Found device /sys/class/rc/rc1/ > Found device /sys/class/rc/rc2/ > Input sysfs node is /sys/class/rc/rc0/input8/ > Event sysfs node is /sys/class/rc/rc0/input8/event5/ > Parsing uevent /sys/class/rc/rc0/input8/event5/uevent > /sys/class/rc/rc0/input8/event5/uevent uevent MAJOR=13 > /sys/class/rc/rc0/input8/event5/uevent uevent MINOR=69 > /sys/class/rc/rc0/input8/event5/uevent uevent DEVNAME=input/event5 > Parsing uevent /sys/class/rc/rc0/uevent > /sys/class/rc/rc0/uevent uevent NAME=rc-imon-mce > /sys/class/rc/rc0/uevent uevent DRV_NAME=imon > input device is /dev/input/event5 > /sys/class/rc/rc0/protocols protocol rc-6 (enabled) > Found /sys/class/rc/rc0/ (/dev/input/event5) with: > Driver imon, table rc-imon-mce > Supported protocols: rc-6 > Enabled protocols: rc-6 > Name: iMON Remote (15c2:ffdc) > bus: 3, vendor/product: 15c2:ffdc, version: 0x0000 > Repeat delay = 500 ms, repeat period = 125 ms > Input sysfs node is /sys/class/rc/rc1/input17/ > Event sysfs node is /sys/class/rc/rc1/input17/event11/ > Parsing uevent /sys/class/rc/rc1/input17/event11/uevent > /sys/class/rc/rc1/input17/event11/uevent uevent MAJOR=13 > /sys/class/rc/rc1/input17/event11/uevent uevent MINOR=75 > /sys/class/rc/rc1/input17/event11/uevent uevent DEVNAME=input/event11 > Parsing uevent /sys/class/rc/rc1/uevent > /sys/class/rc/rc1/uevent uevent NAME=rc-dvico-mce > /sys/class/rc/rc1/uevent uevent DRV_NAME=dvb_usb_cxusb > input device is /dev/input/event11 > /sys/class/rc/rc1/protocols protocol nec (disabled) > Found /sys/class/rc/rc1/ (/dev/input/event11) with: > Driver dvb_usb_cxusb, table rc-dvico-mce > Supported protocols: nec > Enabled protocols: > Name: IR-receiver inside an USB DVB re > bus: 3, vendor/product: 0fe9:db78, version: 0x827b > Repeat delay = 500 ms, repeat period = 125 ms > Input sysfs node is /sys/class/rc/rc2/input19/ > Event sysfs node is /sys/class/rc/rc2/input19/event16/ > Parsing uevent /sys/class/rc/rc2/input19/event16/uevent > /sys/class/rc/rc2/input19/event16/uevent uevent MAJOR=13 > /sys/class/rc/rc2/input19/event16/uevent uevent MINOR=80 > /sys/class/rc/rc2/input19/event16/uevent uevent DEVNAME=input/event16 > Parsing uevent /sys/class/rc/rc2/uevent > /sys/class/rc/rc2/uevent uevent NAME=rc-empty > /sys/class/rc/rc2/uevent uevent DRV_NAME=dvb_usb_af9035 > input device is /dev/input/event16 > /sys/class/rc/rc2/protocols protocol nec (disabled) > Found /sys/class/rc/rc2/ (/dev/input/event16) with: > Driver dvb_usb_af9035, table rc-empty > Supported protocols: nec > Enabled protocols: > Name: Leadtek WinFast DTV Dongle Dual > bus: 3, vendor/product: 0413:6a05, version: 0x0200 > Repeat delay = 500 ms, repeat period = 125 ms > > So only rc0 has any protocols enabled. Let's try to enable nec on rc1 > > $ sudo /usr/bin/ir-keytable -s rc1 -c > Old keytable cleared > $ sudo /usr/bin/ir-keytable -s rc1 -w /etc/rc_keymaps/dvico-remote > Read dvico_mce table > Wrote 45 keycode(s) to driver > Invalid protocols selected > Couldn't change the IR protocols > $ sudo /usr/bin/ir-keytable -s rc1 -p nec -v > Found device /sys/class/rc/rc0/ > Found device /sys/class/rc/rc1/ > Found device /sys/class/rc/rc2/ > Input sysfs node is /sys/class/rc/rc1/input17/ > Event sysfs node is /sys/class/rc/rc1/input17/event11/ > Parsing uevent /sys/class/rc/rc1/input17/event11/uevent > /sys/class/rc/rc1/input17/event11/uevent uevent MAJOR=13 > /sys/class/rc/rc1/input17/event11/uevent uevent MINOR=75 > /sys/class/rc/rc1/input17/event11/uevent uevent DEVNAME=input/event11 > Parsing uevent /sys/class/rc/rc1/uevent > /sys/class/rc/rc1/uevent uevent NAME=rc-dvico-mce > /sys/class/rc/rc1/uevent uevent DRV_NAME=dvb_usb_cxusb > input device is /dev/input/event11 > /sys/class/rc/rc1/protocols protocol nec (disabled) > Opening /dev/input/event11 > Input Protocol version: 0x00010001 > /sys/class/rc/rc1//protocols: Invalid argument > Couldn't change the IR protocols On the cxusb the protocol is now nec, and that is the only protocol it supports, you can't change it. > $ sudo cat /sys/class/rc/rc1/protocols > nec > $ sudo sh > # echo "+rc-5 +nec +rc-6 +jvc +sony +rc-5-sz +sanyo +sharp +xmp" > > /sys/class/rc/rc1/protocols > bash: echo: write error: Invalid argument > # cat /sys/class/rc/rc1/protocols > nec > In kern.log I got: > kernel: [ 2293.491534] rc_core: Normal protocol change requested > kernel: [ 2293.491538] rc_core: Protocol switching not supported > > # echo "+nec" > /sys/class/rc/rc1/protocols > bash: echo: write error: Invalid argument > kernel: [ 2390.832476] rc_core: Normal protocol change requested > kernel: [ 2390.832481] rc_core: Protocol switching not supported That is expected. Does the the keymap actually work? ir-keytable -r -t Thanks, Sean
