Hey there
On 11/30/16, Vincent McIntyre <vincent.mcintyre@xxxxxxxxx> wrote:
> On Sun, Nov 27, 2016 at 07:35:10PM +0000, Sean Young wrote:
>>
>> > I wanted to mention that the IR protocol is still showing as unknown.
>> > Is there anything that can be done to sort that out?
>>
>> It would be nice if that could be sorted out, although that would be
>> a separate patch.
>>
>> So all we know right now is what scancode the IR receiver hardware
>> produces but we have no idea what IR protocol is being used. In order to
>> figure this out we need a recording of the IR the remote sends, for which
>> a different IR receiver is needed. Neither your imon nor your
>> dvb_usb_af9035 can do this, something like a mce usb IR receiver would
>> be best. Do you have access to one? One with an IR emitter would be
>> best.
>>
>> So with that we can have a recording of the IR the remote sends, and
>> with the emitter we can see which IR protocols the IR receiver
>> understands.
>
> Haven't been able to find anything suitable. I would order something
> but I won't be able to follow up for several weeks.
> I'll ask on the myth list to see if anyone is up for trying this.
>
I bought one of these, but I am not sure how to make the recording:
# lsusb -d 1934:5168 -v
Bus 008 Device 003: ID 1934:5168 Feature Integration Technology Inc.
(Fintek) F71610A or F71612A Consumer Infrared Receiver/Transceiver
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 16
idVendor 0x1934 Feature Integration Technology Inc. (Fintek)
idProduct 0x5168 F71610A or F71612A Consumer Infrared
Receiver/Transceiver
bcdDevice 0.01
iManufacturer 1 FINTEK
iProduct 2 eHome Infrared Transceiver
iSerial 3 88636562727801
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
# ir-keytable -v
Found device /sys/class/rc/rc0/
Found device /sys/class/rc/rc1/
Found device /sys/class/rc/rc2/
Found device /sys/class/rc/rc3/ <---- the new device
Input sysfs node is /sys/class/rc/rc0/input8/
Event sysfs node is /sys/class/rc/rc0/input8/event5/
Parsing uevent /sys/class/rc/rc0/input8/event5/uevent
/sys/class/rc/rc0/input8/event5/uevent uevent MAJOR=13
/sys/class/rc/rc0/input8/event5/uevent uevent MINOR=69
/sys/class/rc/rc0/input8/event5/uevent uevent DEVNAME=input/event5
Parsing uevent /sys/class/rc/rc0/uevent
/sys/class/rc/rc0/uevent uevent NAME=rc-imon-mce
/sys/class/rc/rc0/uevent uevent DRV_NAME=imon
input device is /dev/input/event5
/sys/class/rc/rc0/protocols protocol rc-6 (enabled)
Found /sys/class/rc/rc0/ (/dev/input/event5) with:
Driver imon, table rc-imon-mce
Supported protocols: rc-6
Enabled protocols: rc-6
Name: iMON Remote (15c2:ffdc)
bus: 3, vendor/product: 15c2:ffdc, version: 0x0000
Repeat delay = 500 ms, repeat period = 125 ms
Input sysfs node is /sys/class/rc/rc1/input18/
Event sysfs node is /sys/class/rc/rc1/input18/event15/
Parsing uevent /sys/class/rc/rc1/input18/event15/uevent
/sys/class/rc/rc1/input18/event15/uevent uevent MAJOR=13
/sys/class/rc/rc1/input18/event15/uevent uevent MINOR=79
/sys/class/rc/rc1/input18/event15/uevent uevent DEVNAME=input/event15
Parsing uevent /sys/class/rc/rc1/uevent
/sys/class/rc/rc1/uevent uevent NAME=rc-dvico-mce
/sys/class/rc/rc1/uevent uevent DRV_NAME=dvb_usb_cxusb
input device is /dev/input/event15
/sys/class/rc/rc1/protocols protocol unknown (disabled)
Found /sys/class/rc/rc1/ (/dev/input/event15) with:
Driver dvb_usb_cxusb, table rc-dvico-mce
Supported protocols: unknown
Enabled protocols:
Name: IR-receiver inside an USB DVB re
bus: 3, vendor/product: 0fe9:db78, version: 0x827b
Repeat delay = 500 ms, repeat period = 125 ms
Input sysfs node is /sys/class/rc/rc2/input19/
Event sysfs node is /sys/class/rc/rc2/input19/event16/
Parsing uevent /sys/class/rc/rc2/input19/event16/uevent
/sys/class/rc/rc2/input19/event16/uevent uevent MAJOR=13
/sys/class/rc/rc2/input19/event16/uevent uevent MINOR=80
/sys/class/rc/rc2/input19/event16/uevent uevent DEVNAME=input/event16
Parsing uevent /sys/class/rc/rc2/uevent
/sys/class/rc/rc2/uevent uevent NAME=rc-empty
/sys/class/rc/rc2/uevent uevent DRV_NAME=dvb_usb_af9035
input device is /dev/input/event16
/sys/class/rc/rc2/protocols protocol nec (disabled)
Found /sys/class/rc/rc2/ (/dev/input/event16) with:
Driver dvb_usb_af9035, table rc-empty
Supported protocols: nec
Enabled protocols:
Name: Leadtek WinFast DTV Dongle Dual
bus: 3, vendor/product: 0413:6a05, version: 0x0200
Repeat delay = 500 ms, repeat period = 125 ms
Input sysfs node is /sys/class/rc/rc3/input20/
<---- new device
Event sysfs node is /sys/class/rc/rc3/input20/event2/
Parsing uevent /sys/class/rc/rc3/input20/event2/uevent
/sys/class/rc/rc3/input20/event2/uevent uevent MAJOR=13
/sys/class/rc/rc3/input20/event2/uevent uevent MINOR=66
/sys/class/rc/rc3/input20/event2/uevent uevent DEVNAME=input/event2
Parsing uevent /sys/class/rc/rc3/uevent
/sys/class/rc/rc3/uevent uevent NAME=rc-rc6-mce
/sys/class/rc/rc3/uevent uevent DRV_NAME=mceusb
input device is /dev/input/event2
/sys/class/rc/rc3/protocols protocol other (disabled)
/sys/class/rc/rc3/protocols protocol unknown (disabled)
/sys/class/rc/rc3/protocols protocol rc-5 (disabled)
/sys/class/rc/rc3/protocols protocol nec (disabled)
/sys/class/rc/rc3/protocols protocol rc-6 (enabled)
/sys/class/rc/rc3/protocols protocol jvc (disabled)
/sys/class/rc/rc3/protocols protocol sony (disabled)
/sys/class/rc/rc3/protocols protocol rc-5-sz (disabled)
/sys/class/rc/rc3/protocols protocol sanyo (disabled)
/sys/class/rc/rc3/protocols protocol sharp (disabled)
/sys/class/rc/rc3/protocols protocol mce_kbd (disabled)
/sys/class/rc/rc3/protocols protocol xmp (disabled)
/sys/class/rc/rc3/protocols protocol cec (disabled)
/sys/class/rc/rc3/protocols protocol lirc (enabled)
Found /sys/class/rc/rc3/ (/dev/input/event2) with:
Driver mceusb, table rc-rc6-mce
Supported protocols: unknown other lirc rc-5 jvc sony nec sanyo
mce-kbd rc-6 sharp xmp
Enabled protocols: lirc rc-6
Name: Media Center Ed. eHome Infrared
bus: 3, vendor/product: 1934:5168, version: 0x0001
Repeat delay = 500 ms, repeat period = 125 ms
When I plugged it in, I got this in dmesg:
usb 8-1: new full-speed USB device number 3 using uhci_hcd
usb 8-1: New USB device found, idVendor=1934, idProduct=5168
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: eHome Infrared Transceiver
usb 8-1: Manufacturer: FINTEK
usb 8-1: SerialNumber: 88636562727801
Registered IR keymap rc-rc6-mce
input: Media Center Ed. eHome Infrared Remote Transceiver (1934:5168)
as /devices/pci0000:00/0000:00:1d.1/usb8/8-1/8-1:1.0/rc/rc3/input20
rc rc3: Media Center Ed. eHome Infrared Remote Transceiver (1934:5168)
as /devices/pci0000:00/0000:00:1d.1/usb8/8-1/8-1:1.0/rc/rc3
lirc_dev: IR Remote Control driver registered, major 241
rc rc3: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
IR LIRC bridge handler initialized
mceusb 8-1:1.0: Registered FINTEK eHome Infrared Transceiver with mce
emulator interface version 2
mceusb 8-1:1.0: 0 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
usbcore: registered new interface driver mceusb
IR RC6 protocol handler initialized
Poking around I see lirc has an irrecord program. Is that what I need?
Vince
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
