On Tue, Nov 22, 2016 at 09:20:44AM +0000, Sean Young wrote:
> > Thanks for this. I have got it to build within the media_build setup
> > but will need to find some windows in the schedule for testing. More
> > in a couple of days. Are there specific things you would like me to
> > test?
>
> You should have an rc device for the IR receiver in the dvb device; does
> it continue to work and can you clear/load a new keymap with ir-keytable,
> and does it work after that.
>
> A "Tested-by" would be great if it all works of course.
Time for some initial results. Good start, not quite there yet.
Nov 23 23:04:56 kernel: Registered IR keymap rc-dvico-mce
Nov 23 23:04:56 kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00
Nov 23 23:04:56 kernel: rc rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:0
Nov 23 23:04:56 kernel: dvb-usb: schedule remote query interval to 100 msecs.
Nov 23 23:04:56 kernel: dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 successfully initiali
Nov 23 23:04:56 kernel: dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4' in warm sta
Nov 23 23:04:56 kernel: dvb-usb: will pass the complete MPEG2 transport stream to the softwa
Nov 23 23:04:56 kernel: dvbdev: DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Di
Nov 23 23:04:56 kernel: usb 3-2: media controller created
Nov 23 23:04:56 kernel: dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered
Nov 23 23:04:56 kernel: cxusb: No IR receiver detected on this device.
Nov 23 23:04:56 kernel: usb 3-2: DVB: registering adapter 1 frontend 0 (Zarlink ZL10353 DVB-
Nov 23 23:04:56 kernel: dvbdev: dvb_create_media_entity: media entity 'Zarlink ZL10353 DVB-T
Nov 23 23:04:56 kernel: xc2028 5-0061: creating new instance
Nov 23 23:04:56 kernel: xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
Nov 23 23:04:56 kernel: xc2028 5-0061: Loading 80 firmware images from xc3028-v27.fw, type:
Nov 23 23:04:56 kernel: dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 successfully initiali
Nov 23 23:04:56 kernel: usbcore: registered new interface driver dvb_usb_cxusb
# lsmod |grep rc
rc_dvico_mce 16384 0
rc_imon_mce 16384 0
rc_core 32768 11 imon,dvb_usb,winbond_cir,dvb_usb_cxusb,rc_imon_mce,rc_dvico_mce,dvb_usb_v2,dvb_usb_af9035
libcrc32c 16384 1 raid456
crc_itu_t 16384 1 firewire_core
# lsmod |grep cxu
dvb_usb_cxusb 77824 2
dib0070 20480 1 dvb_usb_cxusb
dvb_usb 32768 1 dvb_usb_cxusb
rc_core 32768 11 imon,dvb_usb,winbond_cir,dvb_usb_cxusb,rc_imon_mce,rc_dvico_mce,dvb_usb_v2,dvb_usb_af9035
# ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event5) with:
Driver imon, table rc-imon-mce
Supported protocols: rc-6
Enabled protocols: rc-6
Name: iMON Remote (15c2:ffdc)
bus: 3, vendor/product: 15c2:ffdc, version: 0x0000
Repeat delay = 500 ms, repeat period = 125 ms
Found /sys/class/rc/rc1/ (/dev/input/event15) with:
Driver (null), table rc-dvico-mce
Supported protocols: unknown
Enabled protocols:
Name: IR-receiver inside an USB DVB re
bus: 3, vendor/product: 0fe9:db78, version: 0x827b
Repeat delay = 500 ms, repeat period = 125 ms
Found /sys/class/rc/rc2/ (/dev/input/event16) with:
Driver dvb_usb_af9035, table rc-empty
Supported protocols: nec
Enabled protocols:
Name: Leadtek WinFast DTV Dongle Dual
bus: 3, vendor/product: 0413:6a05, version: 0x0200
Repeat delay = 500 ms, repeat period = 125 ms
Not sure why Driver is (null), dvb_usb_cxusb is loaded.
# ir-keytable -s rc1 -r -v
Found device /sys/class/rc/rc0/
Found device /sys/class/rc/rc1/
Found device /sys/class/rc/rc2/
Input sysfs node is /sys/class/rc/rc1/input18/
Event sysfs node is /sys/class/rc/rc1/input18/event15/
Parsing uevent /sys/class/rc/rc1/input18/event15/uevent
/sys/class/rc/rc1/input18/event15/uevent uevent MAJOR=13
/sys/class/rc/rc1/input18/event15/uevent uevent MINOR=79
/sys/class/rc/rc1/input18/event15/uevent uevent DEVNAME=input/event15
Parsing uevent /sys/class/rc/rc1/uevent
/sys/class/rc/rc1/uevent uevent NAME=rc-dvico-mce
input device is /dev/input/event15
/sys/class/rc/rc1/protocols protocol unknown (disabled)
Opening /dev/input/event15
Input Protocol version: 0x00010001
scancode 0xfe01 = KEY_RECORD (0xa7)
scancode 0xfe02 = KEY_TV (0x179)
scancode 0xfe03 = KEY_0 (0x0b)
scancode 0xfe05 = KEY_VOLUMEDOWN (0x72)
scancode 0xfe07 = KEY_4 (0x05)
scancode 0xfe09 = KEY_CHANNELDOWN (0x193)
scancode 0xfe0a = KEY_EPG (0x16d)
scancode 0xfe0b = KEY_1 (0x02)
scancode 0xfe0d = KEY_STOP (0x80)
scancode 0xfe0e = KEY_MP3 (0x187)
scancode 0xfe0f = KEY_PREVIOUSSONG (0xa5)
scancode 0xfe11 = KEY_CHANNELUP (0x192)
scancode 0xfe12 = KEY_NEXTSONG (0xa3)
scancode 0xfe13 = KEY_ANGLE (0x173)
scancode 0xfe15 = KEY_VOLUMEUP (0x73)
scancode 0xfe16 = KEY_SETUP (0x8d)
scancode 0xfe17 = KEY_2 (0x03)
scancode 0xfe19 = KEY_OPEN (0x86)
scancode 0xfe1a = KEY_DVD (0x185)
scancode 0xfe1b = KEY_3 (0x04)
scancode 0xfe1e = KEY_FAVORITES (0x16c)
scancode 0xfe1f = KEY_ZOOM (0x174)
scancode 0xfe42 = KEY_ENTER (0x1c)
scancode 0xfe43 = KEY_REWIND (0xa8)
scancode 0xfe46 = KEY_POWER2 (0x164)
scancode 0xfe47 = KEY_PLAYPAUSE (0xa4)
scancode 0xfe48 = KEY_7 (0x08)
scancode 0xfe49 = KEY_BACK (0x9e)
scancode 0xfe4c = KEY_8 (0x09)
scancode 0xfe4d = KEY_MENU (0x8b)
scancode 0xfe4e = KEY_POWER (0x74)
scancode 0xfe4f = KEY_FASTFORWARD (0xd0)
scancode 0xfe50 = KEY_5 (0x06)
scancode 0xfe51 = KEY_UP (0x67)
scancode 0xfe52 = KEY_CAMERA (0xd4)
scancode 0xfe53 = KEY_DOWN (0x6c)
scancode 0xfe54 = KEY_6 (0x07)
scancode 0xfe55 = KEY_TAB (0x0f)
scancode 0xfe57 = KEY_MUTE (0x71)
scancode 0xfe58 = KEY_9 (0x0a)
scancode 0xfe59 = KEY_INFO (0x166)
scancode 0xfe5a = KEY_TUNER (0x182)
scancode 0xfe5b = KEY_LEFT (0x69)
scancode 0xfe5e = KEY_OK (0x160)
scancode 0xfe5f = KEY_RIGHT (0x6a)
Enabled protocols:
#
I tried -t and it generated events constantly, before I could press
any keys.
# ir-keytable -s rc1 -t
Testing events. Please, press CTRL-C to abort.
1479903007.535509: event type EV_MSC(0x04): scancode = 0x00
1479903007.535509: event type EV_SYN(0x00).
1479903007.635521: event type EV_MSC(0x04): scancode = 0x00
1479903007.635521: event type EV_SYN(0x00).
1479903007.735535: event type EV_MSC(0x04): scancode = 0x00
1479903007.735535: event type EV_SYN(0x00).
1479903007.839552: event type EV_MSC(0x04): scancode = 0x00
1479903007.839552: event type EV_SYN(0x00).
1479903007.939565: event type EV_MSC(0x04): scancode = 0x00
1479903007.939565: event type EV_SYN(0x00).
1479903008.039579: event type EV_MSC(0x04): scancode = 0x00
1479903008.039579: event type EV_SYN(0x00).
1479903008.143594: event type EV_MSC(0x04): scancode = 0x00
1479903008.143594: event type EV_SYN(0x00).
1479903008.243608: event type EV_MSC(0x04): scancode = 0x00
1479903008.243608: event type EV_SYN(0x00).
1479903008.343622: event type EV_MSC(0x04): scancode = 0x00
1479903008.343622: event type EV_SYN(0x00).
1479903008.443512: event type EV_MSC(0x04): scancode = 0x00
1479903008.443512: event type EV_SYN(0x00).
1479903008.543525: event type EV_MSC(0x04): scancode = 0x00
1479903008.543525: event type EV_SYN(0x00).
1479903008.647541: event type EV_MSC(0x04): scancode = 0x00
1479903008.647541: event type EV_SYN(0x00).
^C
Same behaviour with -d /dev/input/event15.
I tried pressing the PLAYPAUSE key:
1479903175.199520: event type EV_MSC(0x04): scancode = 0x00
1479903175.199520: event type EV_SYN(0x00).
1479903175.299538: event type EV_MSC(0x04): scancode = 0xfe47
1479903175.299538: event type EV_KEY(0x01) key_down: KEY_PLAYPAUSE(0x00a4)
1479903175.299538: event type EV_SYN(0x00).
1479903175.399554: event type EV_KEY(0x01) key_up: KEY_PLAYPAUSE(0x00a4)
1479903175.399554: event type EV_MSC(0x04): scancode = 0x00
1479903175.399554: event type EV_SYN(0x00).
1479903175.499563: event type EV_MSC(0x04): scancode = 0x00
1479903175.499563: event type EV_SYN(0x00).
1479903175.599579: event type EV_MSC(0x04): scancode = 0x00
1479903175.599579: event type EV_SYN(0x00).
1479903175.699593: event type EV_MSC(0x04): scancode = 0x00
1479903175.699593: event type EV_SYN(0x00).
1479903175.799481: event type EV_MSC(0x04): scancode = 0x00
1479903175.799481: event type EV_SYN(0x00).
1479903175.899496: event type EV_MSC(0x04): scancode = 0x00
1479903175.899496: event type EV_SYN(0x00).
1479903175.999510: event type EV_MSC(0x04): scancode = 0x00
1479903175.999510: event type EV_SYN(0x00).
1479903176.099653: event type EV_MSC(0x04): scancode = 0xfe47
1479903176.099653: event type EV_KEY(0x01) key_down: KEY_PLAYPAUSE(0x00a4)
1479903176.099653: event type EV_SYN(0x00).
1479903176.199540: event type EV_KEY(0x01) key_up: KEY_PLAYPAUSE(0x00a4)
1479903176.199540: event type EV_MSC(0x04): scancode = 0x00
1479903176.199540: event type EV_SYN(0x00).
Same behaviour wth 'evtest'
I explored telling it what protocol to use etc.
# cat /sys/class/rc/rc1/protocols
unknown
# echo 3 > /sys/module/rc_core/parameters/debug
# journalctl -f -k
(Pressing PLAYPAUSE, once)
Nov 23 23:21:52 kernel: rc_core: IR-receiver inside an USB DVB receiver: scancode 0xfe47 keycode 0xa4
Nov 23 23:21:52 kernel: rc_core: IR-receiver inside an USB DVB receiver: key down event, key 0x00a4, protocol 0x0000, scancode 0x0000fe47
Nov 23 23:21:52 kernel: rc_core: keyup key 0x00a4
(MENU)
Nov 23 23:24:34 kernel: rc_core: IR-receiver inside an USB DVB receiver: scancode 0xfe4d keycode 0x8b
Nov 23 23:24:34 kernel: rc_core: IR-receiver inside an USB DVB receiver: key down event, key 0x008b, protocol 0x0000, scancode 0x0000fe4d
Nov 23 23:24:34 kernel: rc_core: keyup key 0x008b
# echo rc-6 > /sys/class/rc/rc1/protocols
Nov 23 23:26:01 kernel: rc_core: Normal protocol change requested
Nov 23 23:26:01 kernel: rc_core: Protocol switching not supported
# cat /sys/class/rc/rc1/protocols
unknown
Try to load a keytable:
# ir-keytable -v -s rc1 -w /lib/udev/rc_keymaps/dvico_mce
Parsing /lib/udev/rc_keymaps/dvico_mce keycode file
parsing 0xfe02=KEY_TV: value=377
parsing 0xfe0e=KEY_MP3: value=391
parsing 0xfe1a=KEY_DVD: value=389
parsing 0xfe1e=KEY_FAVORITES: value=364
parsing 0xfe16=KEY_SETUP: value=141
parsing 0xfe46=KEY_POWER2: value=356
parsing 0xfe0a=KEY_EPG: value=365
parsing 0xfe49=KEY_BACK: value=158
parsing 0xfe4d=KEY_MENU: value=139
parsing 0xfe51=KEY_UP: value=103
parsing 0xfe5b=KEY_LEFT: value=105
parsing 0xfe5f=KEY_RIGHT: value=106
parsing 0xfe53=KEY_DOWN: value=108
parsing 0xfe5e=KEY_OK: value=352
parsing 0xfe59=KEY_INFO: value=358
parsing 0xfe55=KEY_TAB: value=15
parsing 0xfe0f=KEY_PREVIOUSSONG: value=165
parsing 0xfe12=KEY_NEXTSONG: value=163
parsing 0xfe42=KEY_ENTER: value=28
parsing 0xfe15=KEY_VOLUMEUP: value=115
parsing 0xfe05=KEY_VOLUMEDOWN: value=114
parsing 0xfe11=KEY_CHANNELUP: value=402
parsing 0xfe09=KEY_CHANNELDOWN: value=403
parsing 0xfe52=KEY_CAMERA: value=212
parsing 0xfe5a=KEY_TUNER: value=386
parsing 0xfe19=KEY_OPEN: value=134
parsing 0xfe0b=KEY_1: value=2
parsing 0xfe17=KEY_2: value=3
parsing 0xfe1b=KEY_3: value=4
parsing 0xfe07=KEY_4: value=5
parsing 0xfe50=KEY_5: value=6
parsing 0xfe54=KEY_6: value=7
parsing 0xfe48=KEY_7: value=8
parsing 0xfe4c=KEY_8: value=9
parsing 0xfe58=KEY_9: value=10
parsing 0xfe13=KEY_ANGLE: value=371
parsing 0xfe03=KEY_0: value=11
parsing 0xfe1f=KEY_ZOOM: value=372
parsing 0xfe43=KEY_REWIND: value=168
parsing 0xfe47=KEY_PLAYPAUSE: value=164
parsing 0xfe4f=KEY_FASTFORWARD: value=208
parsing 0xfe57=KEY_MUTE: value=113
parsing 0xfe0d=KEY_STOP: value=128
parsing 0xfe01=KEY_RECORD: value=167
parsing 0xfe4e=KEY_POWER: value=116
Read dvico_mce table
Found device /sys/class/rc/rc0/
Found device /sys/class/rc/rc1/
Found device /sys/class/rc/rc2/
Input sysfs node is /sys/class/rc/rc1/input18/
Event sysfs node is /sys/class/rc/rc1/input18/event15/
Parsing uevent /sys/class/rc/rc1/input18/event15/uevent
/sys/class/rc/rc1/input18/event15/uevent uevent MAJOR=13
/sys/class/rc/rc1/input18/event15/uevent uevent MINOR=79
/sys/class/rc/rc1/input18/event15/uevent uevent DEVNAME=input/event15
Parsing uevent /sys/class/rc/rc1/uevent
/sys/class/rc/rc1/uevent uevent NAME=rc-dvico-mce
input device is /dev/input/event15
/sys/class/rc/rc1/protocols protocol unknown (disabled)
Opening /dev/input/event15
Input Protocol version: 0x00010001
fe4e=0074
fe01=00a7
fe0d=0080
fe57=0071
fe4f=00d0
fe47=00a4
fe43=00a8
fe1f=0174
fe03=000b
fe13=0173
fe58=000a
fe4c=0009
fe48=0008
fe54=0007
fe50=0006
fe07=0005
fe1b=0004
fe17=0003
fe0b=0002
fe19=0086
fe5a=0182
fe52=00d4
fe09=0193
fe11=0192
fe05=0072
fe15=0073
fe42=001c
fe12=00a3
fe0f=00a5
fe55=000f
fe59=0166
fe5e=0160
fe53=006c
fe5f=006a
fe5b=0069
fe51=0067
fe4d=008b
fe49=009e
fe0a=016d
fe46=0164
fe16=008d
fe1e=016c
fe1a=0185
fe0e=0187
fe02=0179
Wrote 45 keycode(s) to driver
/sys/class/rc/rc1//protocols: Invalid argument
Couldn't change the IR protocols
#
Same result if I add -p RC-6 to the argument list.
Cheers
Vince
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
