Hi Kieran,
Thank you for the patch.
On Friday 10 Feb 2017 20:27:31 Kieran Bingham wrote:
> The image partition algorithm operates on the image dimensions as input
> into the WPF entity.
>
> Correct this in the code, and document what defines the properties for
> the algorithm in the section header
Nitpicking, this sentence lacks a period.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/platform/vsp1/vsp1_video.c | 12 ++++++++++--
> drivers/media/platform/vsp1/vsp1_wpf.c | 4 ++--
> 2 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1_video.c
> b/drivers/media/platform/vsp1/vsp1_video.c index be9c860b1c04..4ade958a1c9e
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_video.c
> +++ b/drivers/media/platform/vsp1/vsp1_video.c
> @@ -176,6 +176,14 @@ static int __vsp1_video_try_format(struct vsp1_video
> *video,
>
> /*
> ---------------------------------------------------------------------------
> -- * VSP1 Partition Algorithm support
> + *
> + * VSP hardware can have restrictions on image width dependent on the
> hardware + * configuration of the pipeline. Adapting for these restrictions
> is implemented + * via the partition algorithm.
> + *
> + * The partition windows and sizes are based on the output size of the WPF
> + * before rotation, which is represented by the input parameters to the WPF
> + * entity in our pipeline.
> */
>
> /**
> @@ -196,7 +204,7 @@ static struct v4l2_rect vsp1_video_partition(struct
> vsp1_pipeline *pipe,
>
> format = vsp1_entity_get_pad_format(&pipe->output->entity,
> pipe->output->entity.config,
> - RWPF_PAD_SOURCE);
> + RWPF_PAD_SINK);
>
> /* A single partition simply processes the output size in full. */
> if (pipe->partitions <= 1) {
> @@ -258,7 +266,7 @@ static void vsp1_video_pipeline_setup_partitions(struct
> vsp1_pipeline *pipe)
>
> format = vsp1_entity_get_pad_format(&pipe->output->entity,
> pipe->output->entity.config,
> - RWPF_PAD_SOURCE);
> + RWPF_PAD_SINK);
> div_size = format->width;
>
> /* Gen2 hardware doesn't require image partitioning. */
> diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c
> b/drivers/media/platform/vsp1/vsp1_wpf.c index 7c48f81cd5c1..ad67034e08e9
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_wpf.c
> +++ b/drivers/media/platform/vsp1/vsp1_wpf.c
> @@ -218,8 +218,8 @@ static void wpf_configure(struct vsp1_entity *entity,
> const struct v4l2_pix_format_mplane *format = &wpf->format;
> struct vsp1_rwpf_memory mem = wpf->mem;
> unsigned int flip = wpf->flip.active;
> - unsigned int width = source_format->width;
> - unsigned int height = source_format->height;
> + unsigned int width = sink_format->width;
> + unsigned int height = sink_format->height;
> unsigned int offset;
>
> /*
--
Regards,
Laurent Pinchart
