Hi Hermann > Hi Fabio, > > Am Donnerstag, den 08.10.2009, 20:02 +0000 schrieb fabio tirapelle: > > Hi > > > > I have installed mythtv on this configuration: > > Asus M3N78-VM GF8200 RGVSM > > AMD Ath64 X2LV 3100BOX6000+ 1MB > > Haupp. WinTV HVR-1100 -t/a PCI > > TechniSat SkyStar 2 DVB-S PCI > > nVidia GeForce 8200 > > Ubuntu 8.10 - Linux htpc 2.6.27-11-generic > > did send to those likely interested too and might be able to give better > advice. > > > Two questions > > > > 1) But the Haupp. WinTV will not be found even if I have followed > > http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110 > > http://ubuntuforums.org/showthread.php?t=623126&page=2 (#12) > > > > Output of dmesg > > > > [ 13.062214] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 > > [ 13.062223] b2c2_flexcop_pci 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI > 17 (level, low) -> IRQ 17 > > [ 13.076654] DVB: registering new adapter (FlexCop Digital TV device) > > [ 13.078432] b2c2-flexcop: MAC address = 00:d0:d7:0d:30:88 > > [ 13.078664] b2c2-flexcop: i2c master_xfer failed > > [ 13.078893] b2c2-flexcop: i2c master_xfer failed > > [ 13.078895] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) > > [ 13.078897] CX24123: wrong demod revision: 87 > > [ 13.101063] saa7130/34: v4l2 driver version 0.2.14 loaded > > [ 13.360642] b2c2-flexcop: found 'ST STV0299 DVB-S' . > > [ 13.360647] DVB: registering frontend 0 (ST STV0299 DVB-S)... > > [ 13.360768] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the > 'PCI' bus controlled by a 'FlexCopIIb' complete > > [ 13.363507] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 > > [ 13.363517] saa7134 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 16 (level, > low) -> IRQ 16 > > [ 13.363523] saa7133[0]: found at 0000:01:07.0, rev: 255, irq: 16, latency: > 255, mmio: 0x0 > > Memory allocation at the PCI bus fails and PCI latency is very high for > nothing in the end. > > > [ 13.363528] saa7133[0]: subsystem: ffff:ffff, board: UNKNOWN/GENERIC > [card=0,autodetected] > > Either the eeprom is corrupted, or more likely, this fails because of > the previous failing. > > > [ 13.363531] saa7133[0]: can't get MMIO memory @ 0x0 > > [ 13.363538] saa7134: probe of 0000:01:07.0 failed with error -16 > > [ 13.393682] saa7134 ALSA driver for DMA sound loaded > > [ 13.393685] saa7134 ALSA: no saa7134 cards found > > > > ouput lspci > > 01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip > / Technisat SkyStar2 DVB card (rev 02) > > 01:07.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 > Video Broadcast Decoder (rev d1) > > > > 2) What kind of DVB-T card will you suggest for my configuration instead of > "Hauppage WinTv"? > > > > We have some unknowns on the various Hauppauge 1110s, but in general > they are assumed to be well supported. > > They are all auto eeprom detectable and only for latest revisions you > need some latest mercurial v4l-dvb. These look good now too. > > Could you try again with the HVR1110 as the only PCI card? I have tried without success > > If this still fails, the mobo seems not to be best treated anyway too, I > would guess the card is broken. What kind of mobo do you suggest? If necessary I can buy a new mobo > > Cheers, > Hermann Thanks Fabio -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
