On Sun, Oct 11, 2009 at 4:06 AM, Michael G <miga_miga@xxxxxx> wrote: > Am Samstag, 10. Oktober 2009 23:48:37 schrieb Devin Heitmueller: >> On Sat, Oct 10, 2009 at 4:19 PM, Michael G <miga_miga@xxxxxx> wrote: >> > Hi, >> > can someone please help me to get my >> > Cinergy XS (Bus 001 Device 010: ID 0ccd:0043 TerraTec Electronic GmbH) >> > to run in a 2.6.32 RC3 gentoo system? >> > >> > When I use the in-kernel driver I'll get the following output: >> > usb 1-1: new high speed USB device using ehci_hcd and address 10 >> > usb 1-1: configuration #1 chosen from 1 choice >> > em28xx: New device TerraTec Electronic GmbH Cinergy T USB XS @ 480 Mbps >> > (0ccd:0043, interface 0, class 0) >> > em28xx #0: chip ID is em2870 >> > em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 43 00 c0 12 81 00 6a 24 8e 34 >> > em28xx #0: i2c eeprom 10: 00 00 06 57 02 0c 00 00 00 00 00 00 00 00 00 00 >> > em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00 >> > em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 ee 2d 46 4a >> > em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 43 00 69 00 >> > em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 54 00 20 00 >> > em28xx #0: i2c eeprom 80: 55 00 53 00 42 00 20 00 58 00 53 00 00 00 34 03 >> > em28xx #0: i2c eeprom 90: 54 00 65 00 72 00 72 00 61 00 54 00 65 00 63 00 >> > em28xx #0: i2c eeprom a0: 20 00 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 >> > em28xx #0: i2c eeprom b0: 6e 00 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 >> > em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> > em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x339064dc >> > em28xx #0: EEPROM info: >> > em28xx #0: No audio on board. >> > em28xx #0: 500mA max power >> > em28xx #0: Table at 0x06, strings=0x246a, 0x348e, 0x0000 >> > em28xx #0: Identified as Terratec Cinergy T XS (card=43) >> > em28xx #0: >> > >> > em28xx #0: The support for this board weren't valid yet. >> > em28xx #0: Please send a report of having this working >> > em28xx #0: not to V4L mailing list (and/or to other addresses) >> > >> > Chip ID is not zero. It is not a TEA5767 >> > tuner 0-0060: chip found @ 0xc0 (em28xx #0) >> > xc2028 0-0060: creating new instance >> > xc2028 0-0060: type set to XCeive xc2028/xc3028 tuner >> > usb 1-1: firmware: requesting xc3028-v27.fw >> > xc2028 0-0060: Loading 80 firmware images from xc3028-v27.fw, type: >> > xc2028 firmware, ver 2.7 >> > xc2028 0-0060: Loading firmware for type=BASE (1), id 0000000000000000. >> > xc2028 0-0060: Loading firmware for type=(0), id 000000000000b700. >> > SCODE (20000000), id 000000000000b700: >> > xc2028 0-0060: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), >> > id 0000000000008000. >> > xc2028 0-0060: Incorrect readback of firmware version. >> > xc2028 0-0060: Loading firmware for type=BASE (1), id 0000000000000000. >> > xc2028 0-0060: Loading firmware for type=(0), id 000000000000b700. >> > SCODE (20000000), id 000000000000b700: >> > xc2028 0-0060: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), >> > id 0000000000008000. >> > xc2028 0-0060: Incorrect readback of firmware version. >> > em28xx #0: v4l2 driver version 0.1.2 >> > em28xx #0: V4L2 video device registered as /dev/video1 >> > >> > >> > No /dev/dvb, so no DVT-T. I tried to use the latest v4l-dvb but I can't >> > compile it: >> > >> > /root/v4l-dvb/v4l/dvbdev.c: In function 'init_dvbdev': >> > /root/v4l-dvb/v4l/dvbdev.c:516: error: 'struct class' has no member named >> > 'nodename' >> > make[3]: *** [/root/v4l-dvb/v4l/dvbdev.o] Error 1 >> > make[2]: *** [_module_/root/v4l-dvb/v4l] Error 2 >> > make[2]: Leaving directory `/usr/src/linux-2.6.32-rc3' >> > make[1]: *** [default] Error 2 >> > make[1]: Leaving directory `/root/v4l-dvb/v4l' >> > make: *** [all] Error 2 >> > >> > Any help is appreciated! >> > >> > Thanks, >> > Michael >> >> Hello Michael, >> >> Don't bother trying to compile the latest v4l-dvb code. It's not >> supported even in the latest code (and there is presently no work >> going on to add support). >> >> Devin > > Hi Devin, > thanks for the info. I'll keep waiting and hoping :) > > Just a quick addition. With 2.6.30 an em28xx-new it runs an the dmesg output > looks like this: > > usb 1-1: new high speed USB device using ehci_hcd and address 14 > usb 1-1: configuration #1 chosen from 1 choice > em28xx v4l2 driver version 0.0.1 loaded > em28xx: new video device (0ccd:0043): interface 0, class 255 > em28xx: device is attached to a USB 2.0 bus > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > em28xx-video.c: New Terratec XS Detected > em28xx #0: Found Terratec Cinergy T XS (MT2060) > usbcore: registered new interface driver em28xx > em2880-dvb.c: DVB Init > MT2060: successfully identified (IF1 = 1220) > DVB: registering new adapter (em2880 DVB-T) > DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... > Em28xx: Initialized (Em2880 DVB Extension) extension > > Cheers, > Michael Yes, you are correct in that it did work in the out-of-kerne em28xx-new driver. No developer has had any interest in making it work in the mainline (and I'm too busy with other things to do it, especially since I don't have the hardware). I'm not arguing that it cannot be made to work - just that I know for sure it doesn't work now and no developers are planning on working on it a this time. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
