Am Samstag, 10. Oktober 2009 23:48:37 schrieb Devin Heitmueller: > On Sat, Oct 10, 2009 at 4:19 PM, Michael G <miga_miga@xxxxxx> wrote: > > Hi, > > can someone please help me to get my > > Cinergy XS (Bus 001 Device 010: ID 0ccd:0043 TerraTec Electronic GmbH) > > to run in a 2.6.32 RC3 gentoo system? > > > > When I use the in-kernel driver I'll get the following output: > > usb 1-1: new high speed USB device using ehci_hcd and address 10 > > usb 1-1: configuration #1 chosen from 1 choice > > em28xx: New device TerraTec Electronic GmbH Cinergy T USB XS @ 480 Mbps > > (0ccd:0043, interface 0, class 0) > > em28xx #0: chip ID is em2870 > > em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 43 00 c0 12 81 00 6a 24 8e 34 > > em28xx #0: i2c eeprom 10: 00 00 06 57 02 0c 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00 > > em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 ee 2d 46 4a > > em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 43 00 69 00 > > em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 54 00 20 00 > > em28xx #0: i2c eeprom 80: 55 00 53 00 42 00 20 00 58 00 53 00 00 00 34 03 > > em28xx #0: i2c eeprom 90: 54 00 65 00 72 00 72 00 61 00 54 00 65 00 63 00 > > em28xx #0: i2c eeprom a0: 20 00 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 > > em28xx #0: i2c eeprom b0: 6e 00 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 > > em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x339064dc > > em28xx #0: EEPROM info: > > em28xx #0: No audio on board. > > em28xx #0: 500mA max power > > em28xx #0: Table at 0x06, strings=0x246a, 0x348e, 0x0000 > > em28xx #0: Identified as Terratec Cinergy T XS (card=43) > > em28xx #0: > > > > em28xx #0: The support for this board weren't valid yet. > > em28xx #0: Please send a report of having this working > > em28xx #0: not to V4L mailing list (and/or to other addresses) > > > > Chip ID is not zero. It is not a TEA5767 > > tuner 0-0060: chip found @ 0xc0 (em28xx #0) > > xc2028 0-0060: creating new instance > > xc2028 0-0060: type set to XCeive xc2028/xc3028 tuner > > usb 1-1: firmware: requesting xc3028-v27.fw > > xc2028 0-0060: Loading 80 firmware images from xc3028-v27.fw, type: > > xc2028 firmware, ver 2.7 > > xc2028 0-0060: Loading firmware for type=BASE (1), id 0000000000000000. > > xc2028 0-0060: Loading firmware for type=(0), id 000000000000b700. > > SCODE (20000000), id 000000000000b700: > > xc2028 0-0060: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), > > id 0000000000008000. > > xc2028 0-0060: Incorrect readback of firmware version. > > xc2028 0-0060: Loading firmware for type=BASE (1), id 0000000000000000. > > xc2028 0-0060: Loading firmware for type=(0), id 000000000000b700. > > SCODE (20000000), id 000000000000b700: > > xc2028 0-0060: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), > > id 0000000000008000. > > xc2028 0-0060: Incorrect readback of firmware version. > > em28xx #0: v4l2 driver version 0.1.2 > > em28xx #0: V4L2 video device registered as /dev/video1 > > > > > > No /dev/dvb, so no DVT-T. I tried to use the latest v4l-dvb but I can't > > compile it: > > > > /root/v4l-dvb/v4l/dvbdev.c: In function 'init_dvbdev': > > /root/v4l-dvb/v4l/dvbdev.c:516: error: 'struct class' has no member named > > 'nodename' > > make[3]: *** [/root/v4l-dvb/v4l/dvbdev.o] Error 1 > > make[2]: *** [_module_/root/v4l-dvb/v4l] Error 2 > > make[2]: Leaving directory `/usr/src/linux-2.6.32-rc3' > > make[1]: *** [default] Error 2 > > make[1]: Leaving directory `/root/v4l-dvb/v4l' > > make: *** [all] Error 2 > > > > Any help is appreciated! > > > > Thanks, > > Michael > > Hello Michael, > > Don't bother trying to compile the latest v4l-dvb code. It's not > supported even in the latest code (and there is presently no work > going on to add support). > > Devin Hi Devin, thanks for the info. I'll keep waiting and hoping :) Just a quick addition. With 2.6.30 an em28xx-new it runs an the dmesg output looks like this: usb 1-1: new high speed USB device using ehci_hcd and address 14 usb 1-1: configuration #1 chosen from 1 choice em28xx v4l2 driver version 0.0.1 loaded em28xx: new video device (0ccd:0043): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx-video.c: New Terratec XS Detected em28xx #0: Found Terratec Cinergy T XS (MT2060) usbcore: registered new interface driver em28xx em2880-dvb.c: DVB Init MT2060: successfully identified (IF1 = 1220) DVB: registering new adapter (em2880 DVB-T) DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... Em28xx: Initialized (Em2880 DVB Extension) extension Cheers, Michael -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
