Hi Matt,
On Wednesday 23 Nov 2016 18:37:29 Matt Ranostay wrote:
> On Wed, Nov 23, 2016 at 8:30 AM, Laurent Pinchart wrote:
> > On Tuesday 22 Nov 2016 17:18:40 Matt Ranostay wrote:
> >> There are several thermal sensors that only have a low-speed bus
> >> interface but output valid video data. This patchset enables support
> >> for the AMG88xx "Grid-Eye" sensor family.
> >>
> >> Cc: Attila Kinali <attila@xxxxxxxxx>
> >> Cc: Marek Vasut <marex@xxxxxxx>
> >> Cc: Luca Barbato <lu_zero@xxxxxxxxxx>
> >> Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
> >> ---
> >> Changes from v1:
> >> * correct i2c_polling_remove() operations
> >> * fixed delay calcuation in buffer_queue()
> >> * add include linux/slab.h
> >>
> >> Changes from v2:
> >> * fix build error due to typo in include of slab.h
> >>
> >> drivers/media/i2c/Kconfig | 8 +
> >> drivers/media/i2c/Makefile | 1 +
> >> drivers/media/i2c/i2c-polling.c | 469 ++++++++++++++++++++++++++++++++++
> >
> > Just looking at the driver name I believe a rename is needed. i2c-polling
> > is a very generic name and would mislead many people into thinking about
> > an I2C subsystem core feature instead of a video driver. "video-i2c" is
> > one option, I'm open to other ideas.
> >
> >> 3 files changed, 478 insertions(+)
> >> create mode 100644 drivers/media/i2c/i2c-polling.c
[snip]
> >> diff --git a/drivers/media/i2c/i2c-polling.c
> >> b/drivers/media/i2c/i2c-polling.c new file mode 100644
> >> index 000000000000..46a4eecde2d2
> >> --- /dev/null
> >> +++ b/drivers/media/i2c/i2c-polling.c
[snip]
> >> +static const struct v4l2_ioctl_ops i2c_polling_ioctl_ops = {
> >> + .vidioc_querycap = i2c_polling_querycap,
> >> + .vidioc_g_input = i2c_polling_g_input,
> >> + .vidioc_s_input = i2c_polling_s_input,
> >> + .vidioc_enum_input = i2c_polling_enum_input,
> >> + .vidioc_enum_fmt_vid_cap = i2c_polling_enum_fmt_vid_cap,
> >> + .vidioc_enum_framesizes = i2c_polling_enum_framesizes,
> >> + .vidioc_enum_frameintervals = i2c_polling_enum_frameintervals,
> >> + .vidioc_g_fmt_vid_cap = i2c_polling_fmt_vid_cap,
> >> + .vidioc_s_fmt_vid_cap = i2c_polling_fmt_vid_cap,
> >> + .vidioc_g_parm = i2c_polling_g_parm,
> >> + .vidioc_s_parm = i2c_polling_s_parm,
> >> + .vidioc_try_fmt_vid_cap = i2c_polling_try_fmt_vid_cap,
> >> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> >> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> >> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> >> + .vidioc_querybuf = vb2_ioctl_querybuf,
> >> + .vidioc_qbuf = vb2_ioctl_qbuf,
> >> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> >> + .vidioc_streamon = vb2_ioctl_streamon,
> >> + .vidioc_streamoff = vb2_ioctl_streamoff,
> >
> > No need to set the buffer-related .vidioc_* pointers to vb2_ioctl_*
> > explicitly, the core will use vb2 if the fields are left unset.
>
> Not so sure about that from getting these ioctl errors with those removed:
>
> avconv -f video4linux2 -s 8x8 -r 10 -i /dev/video0 test%3d.png
> avconv version 8cd084d, Copyright (c) 2000-2016 the Libav developers
> built on Nov 8 2016 02:26:17 with gcc 4.7.3 (Linaro GCC
> 4.7-2013.02-01) 20130205 (prerelease)
> [video4linux2 @ 0x10390c0] ioctl(VIDIOC_QUERYBUF)
> /dev/video0: Inappropriate ioctl for device
My comment was wrong, I've mistaken it with the control-related ioctls. I'm
very sorry about that.
> >> + .vidioc_log_status = v4l2_ctrl_log_status,
> >> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> >> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> >> +};
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
