Re: [Patch 05/35] media: ti-vpe: Use line average de-interlacing for first 2 frames

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24/10/16 18:56, Benoit Parrot wrote:
Hans Verkuil <hverkuil@xxxxxxxxx> wrote on Mon [2016-Oct-17 16:14:35 +0200]:
On 09/28/2016 11:20 PM, Benoit Parrot wrote:
From: Archit Taneja <archit@xxxxxx>

For n input fields, the VPE de-interlacer creates n - 2 progressive frames.

That's confusing. I think you mean '(n / 2) - 1'? Two fields make one frame, right?

No it is (N - 2), the motion detection block requires 3 fields to create the motion
vector data. So without doing anything special the first progressive frame would be
generated after the 3 field is consumed and then a progressive frame is generated
every field after that always keeping the last 2 fields in reserve.

This patch adds a special modes so that line averaging mode is use for the
first two fields so that in the end we get N progressive frames generated
from N fields.

OK, so the commit log needs a bit more work :-)

If I'm confused, then others will be as well is my guess...

Regards,

	Hans


Benoit


Regards,

	Hans


To support this, we use line average mode of de-interlacer for the first 2
input fields to generate 2 progressive frames. We then revert back to the
preferred EDI method, and create n - 2 frames, creating a sum of n frames.

Signed-off-by: Archit Taneja <archit@xxxxxx>
Signed-off-by: Nikhil Devshatwar <nikhil.nd@xxxxxx>
Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
---
 drivers/media/platform/ti-vpe/vpe.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 3921fd8cdf1d..a0b29685fb69 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -141,7 +141,7 @@ struct vpe_dei_regs {
  */
 static const struct vpe_dei_regs dei_regs = {
 	.mdt_spacial_freq_thr_reg = 0x020C0804u,
-	.edi_config_reg = 0x0118100Fu,
+	.edi_config_reg = 0x0118100Cu,
 	.edi_lut_reg0 = 0x08040200u,
 	.edi_lut_reg1 = 0x1010100Cu,
 	.edi_lut_reg2 = 0x10101010u,
@@ -798,6 +798,23 @@ static void set_dei_shadow_registers(struct vpe_ctx *ctx)
 	ctx->load_mmrs = true;
 }

+static void config_edi_input_mode(struct vpe_ctx *ctx, int mode)
+{
+	struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
+	u32 *edi_config_reg = &mmr_adb->dei_regs[3];
+
+	if (mode & 0x2)
+		write_field(edi_config_reg, 1, 1, 2);	/* EDI_ENABLE_3D */
+
+	if (mode & 0x3)
+		write_field(edi_config_reg, 1, 1, 3);	/* EDI_CHROMA_3D  */
+
+	write_field(edi_config_reg, mode, VPE_EDI_INP_MODE_MASK,
+		VPE_EDI_INP_MODE_SHIFT);
+
+	ctx->load_mmrs = true;
+}
+
 /*
  * Set the shadow registers whose values are modified when either the
  * source or destination format is changed.
@@ -1111,6 +1128,15 @@ static void device_run(void *priv)
 	ctx->dst_vb = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
 	WARN_ON(ctx->dst_vb == NULL);

+	if (ctx->deinterlacing) {
+		/*
+		 * we have output the first 2 frames through line average, we
+		 * now switch to EDI de-interlacer
+		 */
+		if (ctx->sequence == 2)
+			config_edi_input_mode(ctx, 0x3); /* EDI (Y + UV) */
+	}
+
 	/* config descriptors */
 	if (ctx->dev->loaded_mmrs != ctx->mmr_adb.dma_addr || ctx->load_mmrs) {
 		vpdma_map_desc_buf(ctx->dev->vpdma, &ctx->mmr_adb);
@@ -1865,7 +1891,10 @@ static void vpe_buf_queue(struct vb2_buffer *vb)

 static int vpe_start_streaming(struct vb2_queue *q, unsigned int count)
 {
-	/* currently we do nothing here */
+	struct vpe_ctx *ctx = vb2_get_drv_priv(q);
+
+	if (ctx->deinterlacing)
+		config_edi_input_mode(ctx, 0x0);

 	return 0;
 }

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux