Re: [Patch 05/35] media: ti-vpe: Use line average de-interlacing for first 2 frames

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/28/2016 11:20 PM, Benoit Parrot wrote:
> From: Archit Taneja <archit@xxxxxx>
> 
> For n input fields, the VPE de-interlacer creates n - 2 progressive frames.

That's confusing. I think you mean '(n / 2) - 1'? Two fields make one frame, right?

Regards,

	Hans

> 
> To support this, we use line average mode of de-interlacer for the first 2
> input fields to generate 2 progressive frames. We then revert back to the
> preferred EDI method, and create n - 2 frames, creating a sum of n frames.
> 
> Signed-off-by: Archit Taneja <archit@xxxxxx>
> Signed-off-by: Nikhil Devshatwar <nikhil.nd@xxxxxx>
> Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> ---
>  drivers/media/platform/ti-vpe/vpe.c | 33 +++++++++++++++++++++++++++++++--
>  1 file changed, 31 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
> index 3921fd8cdf1d..a0b29685fb69 100644
> --- a/drivers/media/platform/ti-vpe/vpe.c
> +++ b/drivers/media/platform/ti-vpe/vpe.c
> @@ -141,7 +141,7 @@ struct vpe_dei_regs {
>   */
>  static const struct vpe_dei_regs dei_regs = {
>  	.mdt_spacial_freq_thr_reg = 0x020C0804u,
> -	.edi_config_reg = 0x0118100Fu,
> +	.edi_config_reg = 0x0118100Cu,
>  	.edi_lut_reg0 = 0x08040200u,
>  	.edi_lut_reg1 = 0x1010100Cu,
>  	.edi_lut_reg2 = 0x10101010u,
> @@ -798,6 +798,23 @@ static void set_dei_shadow_registers(struct vpe_ctx *ctx)
>  	ctx->load_mmrs = true;
>  }
>  
> +static void config_edi_input_mode(struct vpe_ctx *ctx, int mode)
> +{
> +	struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
> +	u32 *edi_config_reg = &mmr_adb->dei_regs[3];
> +
> +	if (mode & 0x2)
> +		write_field(edi_config_reg, 1, 1, 2);	/* EDI_ENABLE_3D */
> +
> +	if (mode & 0x3)
> +		write_field(edi_config_reg, 1, 1, 3);	/* EDI_CHROMA_3D  */
> +
> +	write_field(edi_config_reg, mode, VPE_EDI_INP_MODE_MASK,
> +		VPE_EDI_INP_MODE_SHIFT);
> +
> +	ctx->load_mmrs = true;
> +}
> +
>  /*
>   * Set the shadow registers whose values are modified when either the
>   * source or destination format is changed.
> @@ -1111,6 +1128,15 @@ static void device_run(void *priv)
>  	ctx->dst_vb = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
>  	WARN_ON(ctx->dst_vb == NULL);
>  
> +	if (ctx->deinterlacing) {
> +		/*
> +		 * we have output the first 2 frames through line average, we
> +		 * now switch to EDI de-interlacer
> +		 */
> +		if (ctx->sequence == 2)
> +			config_edi_input_mode(ctx, 0x3); /* EDI (Y + UV) */
> +	}
> +
>  	/* config descriptors */
>  	if (ctx->dev->loaded_mmrs != ctx->mmr_adb.dma_addr || ctx->load_mmrs) {
>  		vpdma_map_desc_buf(ctx->dev->vpdma, &ctx->mmr_adb);
> @@ -1865,7 +1891,10 @@ static void vpe_buf_queue(struct vb2_buffer *vb)
>  
>  static int vpe_start_streaming(struct vb2_queue *q, unsigned int count)
>  {
> -	/* currently we do nothing here */
> +	struct vpe_ctx *ctx = vb2_get_drv_priv(q);
> +
> +	if (ctx->deinterlacing)
> +		config_edi_input_mode(ctx, 0x0);
>  
>  	return 0;
>  }
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux