Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/as3645a.c | 13 +++++++------
drivers/media/i2c/msp3400-kthreads.c | 4 ++--
drivers/media/i2c/mt9m032.c | 5 +++--
drivers/media/i2c/mt9p031.c | 5 +++--
drivers/media/i2c/saa7115.c | 18 +++++++++++-------
drivers/media/i2c/saa717x.c | 4 ++--
drivers/media/i2c/tvp5150.c | 14 ++++++++------
drivers/media/i2c/tvp7002.c | 6 +++---
drivers/media/i2c/upd64083.c | 4 +---
9 files changed, 40 insertions(+), 33 deletions(-)
diff --git a/drivers/media/i2c/as3645a.c b/drivers/media/i2c/as3645a.c
index 2e90e4094b79..d2f56014a150 100644
--- a/drivers/media/i2c/as3645a.c
+++ b/drivers/media/i2c/as3645a.c
@@ -299,8 +299,8 @@ static int as3645a_read_fault(struct as3645a *flash)
dev_dbg(&client->dev, "Inductor Peak limit fault\n");
if (rval & AS_FAULT_INFO_INDICATOR_LED)
- dev_dbg(&client->dev, "Indicator LED fault: "
- "Short circuit or open loop\n");
+ dev_dbg(&client->dev,
+ "Indicator LED fault: Short circuit or open loop\n");
dev_dbg(&client->dev, "%u connected LEDs\n",
rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1);
@@ -315,8 +315,8 @@ static int as3645a_read_fault(struct as3645a *flash)
dev_dbg(&client->dev, "Short circuit fault\n");
if (rval & AS_FAULT_INFO_OVER_VOLTAGE)
- dev_dbg(&client->dev, "Over voltage fault: "
- "Indicates missing capacitor or open connection\n");
+ dev_dbg(&client->dev,
+ "Over voltage fault: Indicates missing capacitor or open connection\n");
return rval;
}
@@ -588,8 +588,9 @@ static int as3645a_registered(struct v4l2_subdev *sd)
/* Verify the chip model and version. */
if (model != 0x01 || rfu != 0x00) {
- dev_err(&client->dev, "AS3645A not detected "
- "(model %d rfu %d)\n", model, rfu);
+ dev_err(&client->dev,
+ "AS3645A not detected (model %d rfu %d)\n",
+ model, rfu);
rval = -ENODEV;
goto power_off;
}
diff --git a/drivers/media/i2c/msp3400-kthreads.c b/drivers/media/i2c/msp3400-kthreads.c
index 17120804fab7..2f72bba64d99 100644
--- a/drivers/media/i2c/msp3400-kthreads.c
+++ b/drivers/media/i2c/msp3400-kthreads.c
@@ -775,8 +775,8 @@ int msp3410d_thread(void *data)
if (msp_amsound && !state->radio &&
(state->v4l2_std & V4L2_STD_SECAM) && (val != 0x0009)) {
/* autodetection has failed, let backup */
- v4l_dbg(1, msp_debug, client, "autodetection failed,"
- " switching to backup standard: %s (0x%04x)\n",
+ v4l_dbg(1, msp_debug, client,
+ "autodetection failed, switching to backup standard: %s (0x%04x)\n",
msp_stdlist[8].name ?
msp_stdlist[8].name : "unknown", val);
state->std = val = 0x0009;
diff --git a/drivers/media/i2c/mt9m032.c b/drivers/media/i2c/mt9m032.c
index da076796999e..83c1d67d72c2 100644
--- a/drivers/media/i2c/mt9m032.c
+++ b/drivers/media/i2c/mt9m032.c
@@ -746,8 +746,9 @@ static int mt9m032_probe(struct i2c_client *client,
chip_version = mt9m032_read(client, MT9M032_CHIP_VERSION);
if (chip_version != MT9M032_CHIP_VERSION_VALUE) {
- dev_err(&client->dev, "MT9M032 not detected, wrong version "
- "0x%04x\n", chip_version);
+ dev_err(&client->dev,
+ "MT9M032 not detected, wrong version 0x%04x\n",
+ chip_version);
ret = -ENODEV;
goto error_sensor;
}
diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index 237737fec09c..86afe1125c91 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -929,8 +929,9 @@ static int mt9p031_registered(struct v4l2_subdev *subdev)
mt9p031_power_off(mt9p031);
if (data != MT9P031_CHIP_VERSION_VALUE) {
- dev_err(&client->dev, "MT9P031 not detected, wrong version "
- "0x%04x\n", data);
+ dev_err(&client->dev,
+ "MT9P031 not detected, wrong version 0x%04x\n",
+ data);
return -ENODEV;
}
diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
index 58062b41c923..3b341a9da004 100644
--- a/drivers/media/i2c/saa7115.c
+++ b/drivers/media/i2c/saa7115.c
@@ -53,8 +53,7 @@
#define VRES_60HZ (480+16)
MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver");
-MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, "
- "Hans Verkuil, Mauro Carvalho Chehab");
+MODULE_AUTHOR("Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, Hans Verkuil, Mauro Carvalho Chehab");
MODULE_LICENSE("GPL");
static bool debug;
@@ -1538,8 +1537,10 @@ static int saa711x_log_status(struct v4l2_subdev *sd)
/* status for the saa7114 */
reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
signalOk = (reg1f & 0xc1) == 0x81;
- v4l2_info(sd, "Video signal: %s\n", signalOk ? "ok" : "bad");
- v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz");
+ v4l2_info(sd, "Video signal: %s\n",
+ signalOk ? "ok" : "bad");
+ v4l2_info(sd, "Frequency: %s\n",
+ (reg1f & 0x20) ? "60 Hz" : "50 Hz");
return 0;
}
@@ -1551,11 +1552,14 @@ static int saa711x_log_status(struct v4l2_subdev *sd)
vcr = !(reg1f & 0x10);
if (state->input >= 6)
- v4l2_info(sd, "Input: S-Video %d\n", state->input - 6);
+ v4l2_info(sd, "Input: S-Video %d\n",
+ state->input - 6);
else
v4l2_info(sd, "Input: Composite %d\n", state->input);
- v4l2_info(sd, "Video signal: %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad");
- v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz");
+ v4l2_info(sd, "Video signal: %s\n",
+ signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad");
+ v4l2_info(sd, "Frequency: %s\n",
+ (reg1f & 0x20) ? "60 Hz" : "50 Hz");
switch (reg1e & 0x03) {
case 1:
diff --git a/drivers/media/i2c/saa717x.c b/drivers/media/i2c/saa717x.c
index 1baca37f3eb6..e67aeec46644 100644
--- a/drivers/media/i2c/saa717x.c
+++ b/drivers/media/i2c/saa717x.c
@@ -735,8 +735,8 @@ static void get_inf_dev_status(struct v4l2_subdev *sd,
reg_data3, stdres[reg_data3 & 0x1f],
(reg_data3 & 0x000020) ? ",stereo" : "",
(reg_data3 & 0x000040) ? ",dual" : "");
- v4l2_dbg(1, debug, sd, "detailed status: "
- "%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n",
+ v4l2_dbg(1, debug, sd,
+ "detailed status: %s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n",
(reg_data3 & 0x000080) ? " A2/EIAJ pilot tone " : "",
(reg_data3 & 0x000100) ? " A2/EIAJ dual " : "",
(reg_data3 & 0x000200) ? " A2/EIAJ stereo " : "",
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 4740da39d698..b3a9580ef1e4 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -280,10 +280,10 @@ static inline void tvp5150_selmux(struct v4l2_subdev *sd)
break;
}
- v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
- "=> tvp5150 input=%i, opmode=%i\n",
- decoder->input, decoder->output,
- input, opmode);
+ v4l2_dbg(1, debug, sd,
+ "Selecting video route: route input=%i, output=%i => tvp5150 input=%i, opmode=%i\n",
+ decoder->input, decoder->output,
+ input, opmode);
tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
@@ -649,7 +649,8 @@ static int tvp5150_set_vbi(struct v4l2_subdev *sd,
int pos=0;
if (std == V4L2_STD_ALL) {
- v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
+ v4l2_err(sd,
+ "VBI can't be configured without knowing number of lines\n");
return 0;
} else if (std & V4L2_STD_625_50) {
/* Don't follow NTSC Line number convension */
@@ -697,7 +698,8 @@ static int tvp5150_get_vbi(struct v4l2_subdev *sd,
int i, ret = 0;
if (std == V4L2_STD_ALL) {
- v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
+ v4l2_err(sd,
+ "VBI can't be configured without knowing number of lines\n");
return 0;
} else if (std & V4L2_STD_625_50) {
/* Don't follow NTSC Line number convension */
diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c
index 3dc3341c4896..c11b49f10de8 100644
--- a/drivers/media/i2c/tvp7002.c
+++ b/drivers/media/i2c/tvp7002.c
@@ -663,7 +663,7 @@ static int tvp7002_query_dv(struct v4l2_subdev *sd, int *index)
if (*index == NUM_TIMINGS) {
v4l2_dbg(1, debug, sd, "detection failed: lpf = %x, cpl = %x\n",
- lpfr, cpln);
+ lpfr, cpln);
return -ENOLINK;
}
@@ -1057,8 +1057,8 @@ static int tvp7002_remove(struct i2c_client *c)
struct v4l2_subdev *sd = i2c_get_clientdata(c);
struct tvp7002 *device = to_tvp7002(sd);
- v4l2_dbg(1, debug, sd, "Removing tvp7002 adapter"
- "on address 0x%x\n", c->addr);
+ v4l2_dbg(1, debug, sd, "Removing tvp7002 adapter on address 0x%x\n",
+ c->addr);
v4l2_async_unregister_subdev(&device->sd);
#if defined(CONFIG_MEDIA_CONTROLLER)
media_entity_cleanup(&device->sd.entity);
diff --git a/drivers/media/i2c/upd64083.c b/drivers/media/i2c/upd64083.c
index 77f122f2e3c9..519ad0e97fec 100644
--- a/drivers/media/i2c/upd64083.c
+++ b/drivers/media/i2c/upd64083.c
@@ -139,9 +139,7 @@ static int upd64083_log_status(struct v4l2_subdev *sd)
u8 buf[7];
i2c_master_recv(client, buf, 7);
- v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x "
- "SA04=%02x SA05=%02x SA06=%02x\n",
- buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
+ v4l2_info(sd, "Status: SA00 to SA07 registers %*ph\n", 7, buf);
return 0;
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
