I got this from tracing I2C bus of tuner.
Windows driver send this to tuner before set frequency, bandwidth, etc.:
wC0 | 15 | C0 00 00 00 00 01 01 01 01 01 01 02 00 00
01 | ...............
; I cut firmware from here, by the way Windows driver use firmware v2.1.8
wC0 | 2 | 01
01 |
..
; I don't known what is it, but with(out) it on Linux my tuner work fine!
; I think this is calibration data(?)
wC0 | 6 | 14 00 10 06 E8
03 | ......
wC0 | 6 | 14 00 11 06 00
00 | ......
wC0 | 6 | 14 00 23 06 9E
80 | ..#...
wC0 | 6 | 14 00 24 06 00
00 | ..$...
wC0 | 6 | 14 00 03 06 08
00 | ......
wC0 | 6 | 14 00 07 06 32
C8 | ....2.
wC0 | 6 | 14 00 01 06 01
00 | ......
wC0 | 6 | 14 00 13 06 00
03 | ......
wC0 | 6 | 14 00 0C 06 88
13 | ......
wC0 | 6 | 14 00 0D 06 94
64 | .....d
wC0 | 6 | 14 00 17 06 00
00 | ......
wC0 | 6 | 14 00 12 06 00
00 | ......
wC0 | 6 | 14 00 05 06 BA
00 | ......
wC0 | 6 | 14 00 04 06 00
02 | ......
wC0 | 6 | 14 00 16 06 00
00 | ......
wC0 | 6 | 14 00 02 04 08
00 | ......
wC0 | 6 | 14 00 01 04 00
00 | ......
wC0 | 6 | 14 00 11 07 00
00 | ......
wC0 | 6 | 14 00 08 07 00
00 | ......
wC0 | 6 | 14 00 02 07 01
00 | ......
wC0 | 6 | 14 00 05 07 32
C8 | ....2.
wC0 | 6 | 14 00 0C 07 01
00 | ......
wC0 | 6 | 14 00 01 07 01
00 | ......
wC0 | 6 | 14 00 0D 07 00
00 | ......
wC0 | 6 | 14 00 0E 07 00
00 | ......
wC0 | 6 | 14 00 10 07 00
00 | ......
wC0 | 6 | 14 00 0A 07 00
01 | ......
wC0 | 6 | 14 00 06 07 88
13 | ......
wC0 | 6 | 14 00 07 07 94
1B | ......
wC0 | 6 | 14 00 03 07 28
00 | ....(.
wC0 | 6 | 14 00 13 07 FF
FF | ......
wC0 | 6 | 14 00 0F 07 00
00 | ......
wC0 | 6 | 14 00 09 07 00
00 | ......
wC0 | 6 | 14 00 04 07 B0
00 |
......
wC0 | 6 | 14 00 12 07 10
00 |
......
wC0 | 6 | 14 00 04 05 00
80 |
......
wC0 | 6 | 14 00 01 05 01
00 |
......
wC0 | 6 | 14 00 05 05 00
07 |
......
wC0 | 6 | 14 00 06 05 01
00 |
......
wC0 | 6 | 14 00 07 05 7F
00 |
......
; without C0 00 0C tuner is not work
wC0 | 3 | C0 00
0C |
...
On 04.08.16 14:11, Olli Salonen wrote:
> Hi Oleh,
>
> It would seem to me that when you start the clocks here:
>
> > "\xC0\x00\x00\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15);
>
> You've removed 0c from third octet compared to the default behaviour.
> However, then later in the sequence you run:
>
> > + /* start tuner? */
> > + if (SI2157_CHIPTYPE_SI2158 == dev->chiptype) {
> > + memcpy(cmd.args, "\xC0\x00\x0C", 3);
>
> Ie. there you do change the parameter in the third octet to 0c. I'm
> wondering what's the reason and significance of that. Was there a
> problem that you solved with this approach? Why is this way better
> than the previous way? I'm trying to understand that.
>
> Cheers,
> -olli
>
>
>
> On 4 August 2016 at 13:26, Oleh Kravchenko <oleg@xxxxxxxxxx
> <mailto:oleg@xxxxxxxxxx>> wrote:
>
> Hi Olli,
>
> Looks like I miss something, what parameter do you mean?
>
> On 04.08.16 13:08, Olli Salonen wrote:
> > Hi Oleh,
> >
> > Do you have any idea of what this parameter change does? I have
> a gut
> > feeling that this is an option that's not Si2158-specific, but a
> > parameter that's valid for the other tuners as well.
> >
> > Do you know what this parameter will actually do? If so, it would be
> > better to add this as a configuration option for the Si2157. Your
> > patch will now change the behaviour even for devices that you
> probably
> > have not tested.
> >
> > Cheers,
> > -olli
> >
> > On 4 August 2016 at 10:54, Oleh Kravchenko <oleg@xxxxxxxxxx
> <mailto:oleg@xxxxxxxxxx>
> > <mailto:oleg@xxxxxxxxxx <mailto:oleg@xxxxxxxxxx>>> wrote:
> >
> > Signed-off-by: Oleh Kravchenko <oleg@xxxxxxxxxx
> <mailto:oleg@xxxxxxxxxx>
> > <mailto:oleg@xxxxxxxxxx <mailto:oleg@xxxxxxxxxx>>>
> > ---
> > drivers/media/tuners/si2157.c | 34
> > +++++++++++++++++++++++++++-------
> > drivers/media/tuners/si2157_priv.h | 1 +
> > 2 files changed, 28 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/media/tuners/si2157.c
> > b/drivers/media/tuners/si2157.c
> > index 57b2508..d7035a5 100644
> > --- a/drivers/media/tuners/si2157.c
> > +++ b/drivers/media/tuners/si2157.c
> > @@ -103,12 +103,21 @@ static int si2157_init(struct
> dvb_frontend *fe)
> > goto warm;
> >
> > /* power up */
> > - if (dev->chiptype == SI2157_CHIPTYPE_SI2146) {
> > - memcpy(cmd.args,
> > "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
> > - cmd.wlen = 9;
> > - } else {
> > - memcpy(cmd.args,
> >
> "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15);
> > - cmd.wlen = 15;
> > + switch (dev->chiptype) {
> > + case SI2157_CHIPTYPE_SI2146:
> > + memcpy(cmd.args,
> > "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
> > + cmd.wlen = 9;
> > + break;
> > +
> > + case SI2157_CHIPTYPE_SI2158:
> > + memcpy(cmd.args,
> >
> "\xC0\x00\x00\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15);
> > + cmd.wlen = 15;
> > + break;
> > +
> > + default:
> > + memcpy(cmd.args,
> >
> "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15);
> > + cmd.wlen = 15;
> > + break;
> > }
> > cmd.rlen = 1;
> > ret = si2157_cmd_execute(client, &cmd);
> > @@ -204,6 +213,16 @@ skip_fw_download:
> > if (ret)
> > goto err;
> >
> > + /* start tuner? */
> > + if (SI2157_CHIPTYPE_SI2158 == dev->chiptype) {
> > + memcpy(cmd.args, "\xC0\x00\x0C", 3);
> > + cmd.wlen = 3;
> > + cmd.rlen = 1;
> > + ret = si2157_cmd_execute(client, &cmd);
> > + if (ret)
> > + goto err;
> > + }
> > +
> > /* query firmware version */
> > memcpy(cmd.args, "\x11", 1);
> > cmd.wlen = 1;
> > @@ -506,8 +525,9 @@ static int si2157_remove(struct i2c_client
> > *client)
> > }
> >
> > static const struct i2c_device_id si2157_id_table[] = {
> > - {"si2157", SI2157_CHIPTYPE_SI2157},
> > {"si2146", SI2157_CHIPTYPE_SI2146},
> > + {"si2157", SI2157_CHIPTYPE_SI2157},
> > + {"si2158", SI2157_CHIPTYPE_SI2158},
> > {}
> > };
> > MODULE_DEVICE_TABLE(i2c, si2157_id_table);
> > diff --git a/drivers/media/tuners/si2157_priv.h
> > b/drivers/media/tuners/si2157_priv.h
> > index d6b2c7b..677fa00 100644
> > --- a/drivers/media/tuners/si2157_priv.h
> > +++ b/drivers/media/tuners/si2157_priv.h
> > @@ -42,6 +42,7 @@ struct si2157_dev {
> >
> > #define SI2157_CHIPTYPE_SI2157 0
> > #define SI2157_CHIPTYPE_SI2146 1
> > +#define SI2157_CHIPTYPE_SI2158 2
> >
> > /* firmware command struct */
> > #define SI2157_ARGLEN 30
> > --
> > 2.7.3
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-media" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> <mailto:majordomo@xxxxxxxxxxxxxxx>
> > <mailto:majordomo@xxxxxxxxxxxxxxx
> <mailto:majordomo@xxxxxxxxxxxxxxx>>
> > More majordomo info at
> http://vger.kernel.org/majordomo-info.html
> >
> >
>
> --
> Best regards,
> Oleh Kravchenko
>
> Senior Software Developer, CMS | skype: oleg_krava | Email:
> oleg@xxxxxxxxxx <mailto:oleg@xxxxxxxxxx>
>
>
>
--
Best regards,
Oleh Kravchenko
Senior Software Developer, CMS | skype: oleg_krava | Email: oleg@xxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
