Just grab that patch and apply it to the current vl4-dvb, no need to mess with old repository. http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/raw-rev/914ded6d921d Now if the current tree doesn't compile, thats another issue, probably something with kernel headers, etc. Actually thats interesting, I will test it on 64-bit Windows 7 when I get home, will RMA that stick if remote doesn't work. As for channel switching, it's most likely a tv viewing software issue, buffering or something like that. For me this tuner locks to transponder in aprox. 1 second. On Mon, Sep 21, 2009 at 12:53:49PM +0200, Roman wrote: > Hi, > > thx for the tip, i jusst tested it on Windows 7 and i was amazed.... > Not only the remote worked perfectly out of the box, also the software used > (some media-center from ArcSoft), worked flawless. (I last used a Hauppauge > TV-Card about 2 years ago on windows). > One thing to note is the channel switching was a LOT faster (max. 1sec.) than > on linux (sometimes > 5sec.). > > Anyway, the remote works on windows, no i am trying to compile the mentioned > repository, but it seems to fail compiling. > I already sent a mail to the msi-support... > > #------ > make[2]: Entering directory `/home/strowi/src/zen-sources' > CC [M] /home/strowi/src/af9015-digivox3_remote/v4l/au0828-cards.o > In file included from /home/strowi/src/af9015-digivox3_remote/v4l/dmxdev.h:33, > from /home/strowi/src/af9015-digivox3_remote/v4l/au0828.h:29, > > from /home/strowi/src/af9015-digivox3_remote/v4l/au0828-cards.c:22: > /home/strowi/src/af9015-digivox3_remote/v4l/compat.h:385: error: redefinition > of 'usb_endpoint_type' > include/linux/usb/ch9.h:377: error: previous definition of 'usb_endpoint_type' > was here > make[3]: *** [/home/strowi/src/af9015-digivox3_remote/v4l/au0828-cards.o] > Error 1 > #------ > > Am Monday 21 September 2009 10:19:33 schrieb Aleksandr V. Piskunov: > > Well, it seems there is a patch for Digivox mini III remote control at > > http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/, perhaps Antti > > can tell you more about it. > > > > I got this tuner, and no, IR receiver doesn't work for me, it doesn't > > even work in WinXP with bundled drivers and software, tested with > > USB snoop, no reaction to keypresses. Maybe a hardware defect at > > receiver part, maybe something is missing in a firmware, no idea. > > > > So check it on some Windows system first, then try patch.. > > > > greetings, > Roman > -- > Iron Law of Distribution: > Them that has, gets. > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
