Hi Gregor, On 20 Sep 09 10:16, Gregor Glashüttner wrote: > I was able to take hi-res pictures of the card now. You can find them at: > http://img24.imageshack.us/img24/7618/abustv8802front.jpg and > http://img22.imageshack.us/img22/5421/abustv8802back.jpg > Maybe someone can help now. the VD-009 entry didn't work because ABUS uses 8-input multiplexers for the four inputs. So there are 3 GPIO lines (0-2) to select the channel instead of the two on the Phytec board. Other things I could see from the pictures: - You can connect an audio source to J7. snd-bt87x will be able to capture it in analog mode. - Any of the four bnc inputs can be routed to the cinch output. This is controlled by U1, which is accessed via I2C. - U14 is a video amplifier for the output. - U1 also controls the watchdog and is able to drive the PCI reset line. - U12 is a sync separator. One of its outputs is connected to GPIO 15 - probably the vsync out pin. I will try to create a patch for the card when I'm back home. Daniel -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html