Re: [PATCH 06/11] media: adv7180: add bt.656-4 OF property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/10/2016 04:17 PM, Ian Arkver wrote:
> On 10/07/16 13:55, Hans Verkuil wrote:
>> On 07/10/2016 02:10 PM, Lars-Peter Clausen wrote:
>>> On 07/09/2016 11:36 PM, Steve Longerbeam wrote:
>>>>
>>>> On 07/09/2016 02:10 PM, Steve Longerbeam wrote:
>>>>>
>>>>> On 07/09/2016 11:59 AM, Steve Longerbeam wrote:
>>>>>>
>>>>>> On 07/07/2016 07:52 AM, Lars-Peter Clausen wrote:
>>>>>>> On 07/07/2016 12:59 AM, Steve Longerbeam wrote:
>>>>>>>> Add a device tree boolean property "bt656-4" to allow setting
>>>>>>>> the ITU-R BT.656-4 compatible bit.
>>>>>>>>
>>>>>>>> Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
>>>>>>> +    /* select ITU-R BT.656-4 compatible? */
>> Please don't use the '-4': BT.656 is sufficient. The -4 is just the version
>> number of the standard (and 5 is the latest anyway).
>  From the ADV7180 DS [1]:
> 
> BT.656-4, ITU-R BT.656-4 Enable, Address 0x04[7]
> 
> Between Revision 3 and Revision 4 of the ITU-R BT.656 standards, the ITU 
> has changed the toggling position for the V bit within the SAV EAV codes 
> for NTSC. The ITU-R BT.656-4 standard bit allows the user to select an 
> output mode that is compliant with either the previous or new standard. 
> For further information, visit the International Telecommunication Union 
> website.
> 
> Note that the standard change only affects NTSC and has no bearing on PAL.
> 
> When ITU-R BT.656-4 is 0 (default), the ITU-R BT.656-3 specification is 
> used. The V bit goes low at EAV of Line 10 and Line 273.
> 
> When ITU-R BT.656-4 is 1, the ITU-R BT.656-4 specification is used. The 
> V bit goes low at EAV of Line 20 and Line 283.
> 
> [1]www.analog.com/media/en/technical-documentation/data-sheets/*ADV7180*.pdf 

Rev 4 came in in 1998. I would say that that is the default. We have had any
problems with this and I would need some proof that this is really needed.

Regards,

	Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux