Am 22.06.16 um 21:25 schrieb Olli Salonen: > Hi Thomas, Hi Olli. > I made some more investigation and figured out that you have a DVB-T2 > mux at 642 MHz in Berlin, and can also see that your w_scan actually > locks on that DVB-T2 mux as you wrote. Sorry, I did not read properly > what you were saying in the beginning. > > Then it should be just a question of finding software that will work > with your DVB-T2 channels as well. I've got no experience of VLC, but > as far as I have understood it should support DVB-T2 as well. I've > used dvbv5-zap and tvheadend with good success, but there are many > others as well. Basically it is important the software implements the > version 5 of the DVB API (DVBv5) instead of the older version 3. Thanks for tipps. Tried them both yesterday. Right now i'm having trouble getting an initial file for dvbv5-scan. thanks again t. > Cheers, > -olli > > > > On 22 June 2016 at 22:10, Olli Salonen <olli.salonen@xxxxxx> wrote: >> Hi Thomas, >> >> Ok, the correct firmwares are there: >> [ 101.423697] si2168 11-0064: found a 'Silicon Labs Si2168-B40' >> [ 101.428693] si2168 11-0064: downloading firmware from file >> 'dvb-demod-si2168-b40-01.fw' >> [ 101.657999] si2168 11-0064: firmware version: 4.0.11 >> [ 101.661225] si2157 12-0060: found a 'Silicon Labs Si2157-A30' >> [ 101.709738] si2157 12-0060: firmware version: 3.0.5 >> >> Basically everything looks good. Does this work on a Windows computer >> using the same antenna cable and the same USB tuner? >> >> DVB-T2 support in w_scan has been evolving also, so make sure you've >> got quite recent version. >> >> I've found that dvbv5-scan does the best job when scanning for >> channels. However that needs initial scan table to start with. The >> initial scan tables for Berlin don't seem to contain any DVB-T2 muxes >> though: https://git.linuxtv.org/dtv-scan-tables.git/tree/dvb-t/de-Berlin >> This means they're probably a bit out of date. If you know the DVB-T2 >> mux details, you can add them yourself and try dvbv5-scan. >> >> Cheers, >> -olli >> >> On 18 June 2016 at 20:17, Thomas Stein <himbeere@xxxxxxxxxxxx> wrote: >>> Hi Olli. >>> >>> Thanks for your answer. >>> >>> Here we go. >>> >>> [ 0.000000] Linux version 4.6.2 (root@rather) (gcc version 5.3.0 (Gentoo >>> 5.3.0 p1.0, pie-0.6.5) ) #3 SMP Sat Jun 18 13:34:40 CEST 2016 >>> [ 0.000000] Command line: BOOT_IMAGE=/kernel-4.6.2 root=/dev/sda3 ro >>> net.ifnames=0 >>> [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 >>> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point >>> registers' >>> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' >>> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' >>> [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 >>> bytes, using 'standard' format. >>> [ 0.000000] x86/fpu: Using 'eager' FPU context switches. >>> [ 0.000000] e820: BIOS-provided physical RAM map: >>> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable >>> [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce20ffff] usable >>> [ 0.000000] BIOS-e820: [mem 0x00000000ce210000-0x00000000dcd3efff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI >>> NVS >>> [ 0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI >>> data >>> [ 0.000000] BIOS-e820: [mem 0x00000000dceff000-0x00000000dfa0ffff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] >>> reserved >>> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable >>> [ 0.000000] NX (Execute Disable) protection: active >>> [ 0.000000] SMBIOS 2.7 present. >>> [ 0.000000] DMI: LENOVO 20A7005MGE/20A7005MGE, BIOS GRET46WW (1.23 ) >>> 11/04/2015 >>> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved >>> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable >>> [ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000 >>> [ 0.000000] MTRR default type: write-back >>> [ 0.000000] MTRR fixed ranges enabled: >>> [ 0.000000] 00000-9FFFF write-back >>> [ 0.000000] A0000-BFFFF uncachable >>> [ 0.000000] C0000-FFFFF write-protect >>> [ 0.000000] MTRR variable ranges enabled: >>> [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable >>> [ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable >>> [ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable >>> [ 0.000000] 3 base 00DCF00000 mask 7FFFF00000 uncachable >>> [ 0.000000] 4 disabled >>> [ 0.000000] 5 disabled >>> [ 0.000000] 6 disabled >>> [ 0.000000] 7 disabled >>> [ 0.000000] 8 disabled >>> [ 0.000000] 9 disabled >>> [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT >>> [ 0.000000] e820: last_pfn = 0xce210 max_arch_pfn = 0x400000000 >>> [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at >>> [ffff8800000f0100] >>> [ 0.000000] Scanning 1 areas for low memory corruption >>> [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 >>> [ 0.000000] Using GB pages for direct mapping >>> [ 0.000000] BRK [0x02101000, 0x02101fff] PGTABLE >>> [ 0.000000] BRK [0x02102000, 0x02102fff] PGTABLE >>> [ 0.000000] BRK [0x02103000, 0x02103fff] PGTABLE >>> [ 0.000000] BRK [0x02104000, 0x02104fff] PGTABLE >>> [ 0.000000] ACPI: Early table checksum verification disabled >>> [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO) >>> [ 0.000000] ACPI: XSDT 0x00000000DCEFE170 0000C4 (v01 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: FACP 0x00000000DCEF8000 00010C (v05 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: DSDT 0x00000000DCEDF000 013476 (v01 LENOVO TP-GR >>> 00001230 INTL 20120711) >>> [ 0.000000] ACPI: FACS 0x00000000DCE6A000 000040 >>> [ 0.000000] ACPI: SLIC 0x00000000DCEFD000 000176 (v01 LENOVO TP-GR >>> 00001230 PTEC 00000001) >>> [ 0.000000] ACPI: ASF! 0x00000000DCEFC000 0000A5 (v32 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: DBGP 0x00000000DCEFB000 000034 (v01 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: ECDT 0x00000000DCEFA000 000052 (v01 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: HPET 0x00000000DCEF7000 000038 (v01 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: APIC 0x00000000DCEF6000 000098 (v01 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: MCFG 0x00000000DCEF5000 00003C (v01 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: SSDT 0x00000000DCEF4000 000033 (v01 LENOVO TP-SSDT1 >>> 00000100 INTL 20120711) >>> [ 0.000000] ACPI: SSDT 0x00000000DCEF3000 000486 (v01 LENOVO TP-SSDT2 >>> 00000200 INTL 20120711) >>> [ 0.000000] ACPI: SSDT 0x00000000DCEDE000 0009CB (v01 LENOVO SataAhci >>> 00001000 INTL 20120711) >>> [ 0.000000] ACPI: SSDT 0x00000000DCEDD000 0007F5 (v01 LENOVO Cpu0Ist >>> 00003000 INTL 20120711) >>> [ 0.000000] ACPI: SSDT 0x00000000DCEDC000 000AD8 (v01 LENOVO CpuPm >>> 00003000 INTL 20120711) >>> [ 0.000000] ACPI: SSDT 0x00000000DCEDA000 00125C (v01 LENOVO SaSsdt >>> 00003000 INTL 20120711) >>> [ 0.000000] ACPI: UEFI 0x00000000DCED9000 000042 (v01 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: MSDM 0x00000000DCE44000 000055 (v03 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: BATB 0x00000000DCED8000 000046 (v01 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: FPDT 0x00000000DCED7000 000064 (v01 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: UEFI 0x00000000DCED6000 0002CE (v01 LENOVO TP-GR >>> 00001230 PTEC 00000002) >>> [ 0.000000] ACPI: SSDT 0x00000000DCED5000 00047F (v01 LENOVO IsctTabl >>> 00001000 INTL 20120711) >>> [ 0.000000] ACPI: Local APIC address 0xfee00000 >>> [ 0.000000] Zone ranges: >>> [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] >>> [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] >>> [ 0.000000] Normal [mem 0x0000000100000000-0x000000021f5fffff] >>> [ 0.000000] Movable zone start for each node >>> [ 0.000000] Early memory node ranges >>> [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] >>> [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ce20ffff] >>> [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f5fffff] >>> [ 0.000000] Initmem setup node 0 [mem >>> 0x0000000000001000-0x000000021f5fffff] >>> [ 0.000000] On node 0 totalpages: 2021292 >>> [ 0.000000] DMA zone: 64 pages used for memmap >>> [ 0.000000] DMA zone: 21 pages reserved >>> [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 >>> [ 0.000000] DMA32 zone: 13129 pages used for memmap >>> [ 0.000000] DMA32 zone: 840208 pages, LIFO batch:31 >>> [ 0.000000] Normal zone: 18392 pages used for memmap >>> [ 0.000000] Normal zone: 1177088 pages, LIFO batch:31 >>> [ 0.000000] Reserving Intel graphics stolen memory at >>> 0xdda00000-0xdf9fffff >>> [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 >>> [ 0.000000] ACPI: Local APIC address 0xfee00000 >>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >>> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI >>> 0-39 >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >>> [ 0.000000] ACPI: IRQ0 used by override. >>> [ 0.000000] ACPI: IRQ9 used by override. >>> [ 0.000000] Using ACPI (MADT) for SMP configuration information >>> [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 >>> [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs >>> [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xce210000-0xdcd3efff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xdceff000-0xdfa0ffff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xdfa10000-0xf7ffffff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] >>> [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] >>> [ 0.000000] e820: [mem 0xdfa10000-0xf7ffffff] available for PCI devices >>> [ 0.000000] Booting paravirtualized kernel on bare hardware >>> [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: >>> 0xffffffff, max_idle_ns: 1910969940391419 ns >>> [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 >>> nr_node_ids:1 >>> [ 0.000000] percpu: Embedded 32 pages/cpu @ffff88021f200000 s91288 r8192 >>> d31592 u262144 >>> [ 0.000000] pcpu-alloc: s91288 r8192 d31592 u262144 alloc=1*2097152 >>> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 >>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total >>> pages: 1989686 >>> [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-4.6.2 root=/dev/sda3 >>> ro net.ifnames=0 >>> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) >>> [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 >>> bytes) >>> [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 >>> bytes) >>> [ 0.000000] Memory: 7861144K/8085168K available (8993K kernel code, 1099K >>> rwdata, 2768K rodata, 1084K init, 844K bss, 224024K reserved, 0K >>> cma-reserved) >>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 >>> [ 0.000000] Hierarchical RCU implementation. >>> [ 0.000000] Build-time adjustment of leaf fanout to 64. >>> [ 0.000000] NR_IRQS:4352 nr_irqs:760 16 >>> [ 0.000000] Console: colour VGA+ 80x25 >>> [ 0.000000] console [tty0] enabled >>> [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, >>> max_idle_ns: 133484882848 ns >>> [ 0.000000] hpet clockevent registered >>> [ 0.000000] tsc: Fast TSC calibration using PIT >>> [ 0.000000] tsc: Detected 2294.638 MHz processor >>> [ 0.000003] Calibrating delay loop (skipped), value calculated using >>> timer frequency.. 4589.27 BogoMIPS (lpj=2294638) >>> [ 0.000196] pid_max: default: 32768 minimum: 301 >>> [ 0.000292] ACPI: Core revision 20160108 >>> [ 0.021433] ACPI: 8 ACPI AML tables successfully acquired and loaded >>> >>> [ 0.021689] Security Framework initialized >>> [ 0.021789] Mount-cache hash table entries: 16384 (order: 5, 131072 >>> bytes) >>> [ 0.021890] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 >>> bytes) >>> [ 0.022281] CPU: Physical Processor ID: 0 >>> [ 0.022373] CPU: Processor Core ID: 0 >>> [ 0.022467] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' >>> [ 0.022564] ENERGY_PERF_BIAS: View and update with >>> x86_energy_perf_policy(8) >>> [ 0.022676] mce: CPU supports 7 MCE banks >>> [ 0.022783] CPU0: Thermal monitoring enabled (TM1) >>> [ 0.022887] process: using mwait in idle threads >>> [ 0.022983] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 >>> [ 0.023080] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 >>> [ 0.023758] Freeing SMP alternatives memory: 36K (ffffffff82023000 - >>> ffffffff8202c000) >>> [ 0.032425] smpboot: Max logical packages: 4 >>> [ 0.032521] smpboot: APIC(0) Converting physical 0 to logical package >>> 0 >>> [ 0.033235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >>> [ 0.043337] TSC deadline timer enabled >>> [ 0.043341] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz >>> (family: 0x6, model: 0x45, stepping: 0x1) >>> [ 0.043632] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, >>> full-width counters, Intel PMU driver. >>> [ 0.044008] ... version: 3 >>> [ 0.044102] ... bit width: 48 >>> [ 0.044194] ... generic registers: 4 >>> [ 0.044287] ... value mask: 0000ffffffffffff >>> [ 0.044384] ... max period: 0000ffffffffffff >>> [ 0.044481] ... fixed-purpose events: 3 >>> [ 0.044573] ... event mask: 000000070000000f >>> [ 0.045021] x86: Booting SMP configuration: >>> [ 0.046155] .... node #0, CPUs: #1 #2 #3 >>> [ 0.232523] x86: Booted up 1 node, 4 CPUs >>> [ 0.232705] smpboot: Total of 4 processors activated (18376.56 BogoMIPS) >>> [ 0.238513] devtmpfs: initialized >>> [ 0.238861] PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff] >>> (1310720 bytes) >>> [ 0.239128] kworker/u16:0 (29) used greatest stack depth: 14280 bytes >>> left >>> [ 0.239130] clocksource: jiffies: mask: 0xffffffff max_cycles: >>> 0xffffffff, max_idle_ns: 1911260446275000 ns >>> [ 0.239257] RTC time: 19:01:15, date: 06/18/16 >>> [ 0.239394] NET: Registered protocol family 16 >>> [ 0.244260] cpuidle: using governor ladder >>> [ 0.250272] cpuidle: using governor menu >>> [ 0.250438] ACPI FADT declares the system doesn't support PCIe ASPM, so >>> disable it >>> [ 0.250584] ACPI: bus type PCI registered >>> [ 0.250845] PCI: Using configuration type 1 for base access >>> [ 0.250990] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on >>> [ 0.254230] kworker/u16:2 (278) used greatest stack depth: 14184 bytes >>> left >>> [ 0.254429] kworker/u16:1 (290) used greatest stack depth: 14160 bytes >>> left >>> [ 0.259563] HugeTLB registered 2 MB page size, pre-allocated 0 pages >>> [ 0.259852] ACPI: Added _OSI(Module Device) >>> [ 0.259948] ACPI: Added _OSI(Processor Device) >>> [ 0.260043] ACPI: Added _OSI(3.0 _SCP Extensions) >>> [ 0.260139] ACPI: Added _OSI(Processor Aggregator Device) >>> [ 0.260523] ACPI : EC: EC description table is found, configuring boot EC >>> [ 0.260640] ACPI : EC: EC started >>> [ 0.268034] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored >>> [ 0.270402] ACPI: Dynamic OEM Table Load: >>> [ 0.270590] ACPI: SSDT 0xFFFF880215F52800 000436 (v01 PmRef Cpu0Cst >>> 00003001 INTL 20120711) >>> [ 0.271758] ACPI: Dynamic OEM Table Load: >>> [ 0.271943] ACPI: SSDT 0xFFFF880215F53000 0005AA (v01 PmRef ApIst >>> 00003000 INTL 20120711) >>> [ 0.273168] ACPI: Dynamic OEM Table Load: >>> [ 0.273351] ACPI: SSDT 0xFFFF8800C9F61800 000119 (v01 PmRef ApCst >>> 00003000 INTL 20120711) >>> [ 0.275037] ACPI: Interpreter enabled >>> [ 0.275160] ACPI: (supports S0 S3 S4 S5) >>> [ 0.275255] ACPI: Using IOAPIC for interrupt routing >>> [ 0.275385] PCI: Using host bridge windows from ACPI; if necessary, use >>> "pci=nocrs" and report a bug >>> [ 0.278879] ACPI: Power Resource [PUBS] (on) >>> [ 0.284147] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) >>> [ 0.284743] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11) >>> [ 0.285327] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) >>> [ 0.285914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11) >>> [ 0.286499] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) >>> [ 0.287066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, >>> disabled. >>> [ 0.287777] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11) >>> [ 0.288359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11) >>> [ 0.288961] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) >>> [ 0.289067] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments >>> MSI] >>> [ 0.289241] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires >>> [ExtendedConfig ASPM ClockPM MSI] >>> [ 0.289450] PCI host bridge to bus 0000:00 >>> [ 0.289547] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] >>> [ 0.289653] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] >>> [ 0.289756] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff >>> window] >>> [ 0.289900] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff >>> window] >>> [ 0.290045] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff >>> window] >>> [ 0.290190] pci_bus 0000:00: root bus resource [bus 00-3f] >>> [ 0.290295] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 >>> [ 0.290406] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 >>> [ 0.290423] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] >>> [ 0.290432] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit >>> pref] >>> [ 0.290438] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] >>> [ 0.290540] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 >>> [ 0.290551] pci 0000:00:03.0: reg 0x10: [mem 0xf0530000-0xf0533fff 64bit] >>> [ 0.290680] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 >>> [ 0.290699] pci 0000:00:14.0: reg 0x10: [mem 0xf0520000-0xf052ffff 64bit] >>> [ 0.290766] pci 0000:00:14.0: PME# supported from D3hot D3cold >>> [ 0.290805] pci 0000:00:14.0: System wakeup disabled by ACPI >>> [ 0.290951] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 >>> [ 0.290970] pci 0000:00:16.0: reg 0x10: [mem 0xf0539000-0xf053901f 64bit] >>> [ 0.291039] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold >>> [ 0.291123] pci 0000:00:19.0: [8086:1559] type 00 class 0x020000 >>> [ 0.291139] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff] >>> [ 0.291148] pci 0000:00:19.0: reg 0x14: [mem 0xf053e000-0xf053efff] >>> [ 0.291157] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] >>> [ 0.291218] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold >>> [ 0.291256] pci 0000:00:19.0: System wakeup disabled by ACPI >>> [ 0.291402] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 >>> [ 0.291418] pci 0000:00:1b.0: reg 0x10: [mem 0xf0534000-0xf0537fff 64bit] >>> [ 0.291488] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>> [ 0.291568] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400 >>> [ 0.291644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >>> [ 0.291781] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400 >>> [ 0.291858] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >>> [ 0.291936] pci 0000:00:1c.1: System wakeup disabled by ACPI >>> [ 0.292088] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 >>> [ 0.292108] pci 0000:00:1d.0: reg 0x10: [mem 0xf053d000-0xf053d3ff] >>> [ 0.292202] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >>> [ 0.292242] pci 0000:00:1d.0: System wakeup disabled by ACPI >>> [ 0.292387] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 >>> [ 0.292578] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 >>> [ 0.292593] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] >>> [ 0.292601] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] >>> [ 0.292609] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] >>> [ 0.292617] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] >>> [ 0.292625] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] >>> [ 0.292634] pci 0000:00:1f.2: reg 0x24: [mem 0xf053c000-0xf053c7ff] >>> [ 0.292677] pci 0000:00:1f.2: PME# supported from D3hot >>> [ 0.292752] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 >>> [ 0.292767] pci 0000:00:1f.3: reg 0x10: [mem 0xf0538000-0xf05380ff 64bit] >>> [ 0.292789] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] >>> [ 0.292925] pci 0000:00:1c.0: PCI bridge to [bus 02] >>> [ 0.293235] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000 >>> [ 0.293319] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit] >>> [ 0.293685] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold >>> [ 0.295818] pci 0000:00:1c.1: PCI bridge to [bus 03] >>> [ 0.295919] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff] >>> [ 0.295938] pci_bus 0000:00: on NUMA node 0 >>> [ 0.296986] ACPI: Enabled 4 GPEs in block 00 to 7F >>> [ 0.297271] ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = >>> 0x62 >>> [ 0.297481] vgaarb: setting as boot device: PCI:0000:00:02.0 >>> [ 0.297582] vgaarb: device added: >>> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >>> [ 0.297734] vgaarb: loaded >>> [ 0.297825] vgaarb: bridge control possible 0000:00:02.0 >>> [ 0.298025] SCSI subsystem initialized >>> [ 0.298181] libata version 3.00 loaded. >>> [ 0.298196] ACPI: bus type USB registered >>> [ 0.298327] usbcore: registered new interface driver usbfs >>> [ 0.298446] usbcore: registered new interface driver hub >>> [ 0.298571] usbcore: registered new device driver usb >>> [ 0.298708] Linux video capture interface: v2.00 >>> [ 0.298844] pps_core: LinuxPPS API ver. 1 registered >>> [ 0.298942] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo >>> Giometti <giometti@xxxxxxxx> >>> [ 0.299097] PTP clock support registered >>> [ 0.299269] Advanced Linux Sound Architecture Driver Initialized. >>> [ 0.299386] PCI: Using ACPI for IRQ routing >>> [ 0.299513] PCI: pci_cache_line_size set to 64 bytes >>> [ 0.299823] Expanded resource reserved due to conflict with PCI Bus >>> 0000:00 >>> [ 0.299925] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] >>> [ 0.299928] e820: reserve RAM buffer [mem 0xce210000-0xcfffffff] >>> [ 0.299930] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff] >>> [ 0.300102] Bluetooth: Core ver 2.21 >>> [ 0.300204] NET: Registered protocol family 31 >>> [ 0.300300] Bluetooth: HCI device and connection manager initialized >>> [ 0.300401] Bluetooth: HCI socket layer initialized >>> [ 0.300500] Bluetooth: L2CAP socket layer initialized >>> [ 0.300601] Bluetooth: SCO socket layer initialized >>> [ 0.300834] NetLabel: Initializing >>> [ 0.300930] NetLabel: domain hash size = 128 >>> [ 0.301023] NetLabel: protocols = UNLABELED CIPSOv4 >>> [ 0.301135] NetLabel: unlabeled traffic allowed by default >>> [ 0.301332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 >>> [ 0.301794] hpet0: 8 comparators, 64-bit 14.318180 MHz counter >>> [ 0.303929] clocksource: Switched to clocksource hpet >>> [ 0.310841] VFS: Disk quotas dquot_6.6.0 >>> [ 0.310968] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 >>> bytes) >>> [ 0.311222] pnp: PnP ACPI init >>> [ 0.311820] system 00:00: [mem 0x00000000-0x0009ffff] could not be >>> reserved >>> [ 0.311936] system 00:00: [mem 0x000c0000-0x000c3fff] could not be >>> reserved >>> [ 0.312037] system 00:00: [mem 0x000c4000-0x000c7fff] could not be >>> reserved >>> [ 0.312138] system 00:00: [mem 0x000c8000-0x000cbfff] could not be >>> reserved >>> [ 0.312239] system 00:00: [mem 0x000cc000-0x000cffff] could not be >>> reserved >>> [ 0.312340] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved >>> [ 0.312441] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved >>> [ 0.312541] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved >>> [ 0.312641] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved >>> [ 0.312741] system 00:00: [mem 0x000e0000-0x000e3fff] could not be >>> reserved >>> [ 0.312842] system 00:00: [mem 0x000e4000-0x000e7fff] could not be >>> reserved >>> [ 0.312952] system 00:00: [mem 0x000e8000-0x000ebfff] could not be >>> reserved >>> [ 0.313053] system 00:00: [mem 0x000ec000-0x000effff] could not be >>> reserved >>> [ 0.313154] system 00:00: [mem 0x000f0000-0x000fffff] could not be >>> reserved >>> [ 0.313255] system 00:00: [mem 0x00100000-0xdf9fffff] could not be >>> reserved >>> [ 0.313356] system 00:00: [mem 0xfec00000-0xffffffff] could not be >>> reserved >>> [ 0.313461] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) >>> [ 0.313610] pnp 00:01: [Firmware Bug]: PNP resource [mem >>> 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending >>> to [mem 0xfed10000-0xfed17fff] >>> [ 0.313842] system 00:01: [io 0x1800-0x189f] could not be reserved >>> [ 0.313955] system 00:01: [io 0x0800-0x087f] has been reserved >>> [ 0.314055] system 00:01: [io 0x0880-0x08ff] has been reserved >>> [ 0.314154] system 00:01: [io 0x0900-0x097f] has been reserved >>> [ 0.314253] system 00:01: [io 0x0980-0x09ff] has been reserved >>> [ 0.314352] system 00:01: [io 0x0a00-0x0a7f] has been reserved >>> [ 0.314450] system 00:01: [io 0x0a80-0x0aff] has been reserved >>> [ 0.314549] system 00:01: [io 0x0b00-0x0b7f] has been reserved >>> [ 0.314647] system 00:01: [io 0x0b80-0x0bff] has been reserved >>> [ 0.314746] system 00:01: [io 0x15e0-0x15ef] has been reserved >>> [ 0.314844] system 00:01: [io 0x1600-0x167f] has been reserved >>> [ 0.314951] system 00:01: [io 0x1640-0x165f] has been reserved >>> [ 0.315051] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved >>> [ 0.315153] system 00:01: [mem 0x00000000-0x00000fff] could not be >>> reserved >>> [ 0.315254] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved >>> [ 0.315354] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved >>> [ 0.315455] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved >>> [ 0.315555] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved >>> [ 0.315655] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved >>> [ 0.315756] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved >>> [ 0.315858] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) >>> [ 0.315937] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) >>> [ 0.315968] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 >>> (active) >>> [ 0.315995] pnp 00:04: Plug and Play ACPI device, IDs LEN0034 PNP0f13 >>> (active) >>> [ 0.316527] system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved >>> [ 0.316631] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) >>> [ 0.316683] pnp: PnP ACPI: found 6 devices >>> [ 0.323875] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, >>> max_idle_ns: 2085701024 ns >>> [ 0.324057] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus >>> 02] add_size 1000 >>> [ 0.324061] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff >>> 64bit pref] to [bus 02] add_size 200000 add_align 100000 >>> [ 0.324064] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] >>> to [bus 02] add_size 200000 add_align 100000 >>> [ 0.324079] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] >>> res_to_dev_res add_size 200000 min_align 100000 >>> [ 0.324081] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x002fffff] >>> res_to_dev_res add_size 200000 min_align 100000 >>> [ 0.324084] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit >>> pref] res_to_dev_res add_size 200000 min_align 100000 >>> [ 0.324086] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff 64bit >>> pref] res_to_dev_res add_size 200000 min_align 100000 >>> [ 0.324088] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] res_to_dev_res >>> add_size 1000 min_align 1000 >>> [ 0.324091] pci 0000:00:1c.0: res[7]=[io 0x1000-0x1fff] res_to_dev_res >>> add_size 1000 min_align 1000 >>> [ 0.324096] pci 0000:00:1c.0: BAR 8: assigned [mem 0xdfb00000-0xdfcfffff] >>> [ 0.324203] pci 0000:00:1c.0: BAR 9: assigned [mem 0xdfd00000-0xdfefffff >>> 64bit pref] >>> [ 0.324351] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] >>> [ 0.324453] pci 0000:00:1c.0: PCI bridge to [bus 02] >>> [ 0.324552] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] >>> [ 0.324654] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff] >>> [ 0.324758] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfefffff >>> 64bit pref] >>> [ 0.324908] pci 0000:00:1c.1: PCI bridge to [bus 03] >>> [ 0.325017] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff] >>> [ 0.325126] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] >>> [ 0.325128] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] >>> [ 0.325131] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff >>> window] >>> [ 0.325133] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff >>> window] >>> [ 0.325135] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff >>> window] >>> [ 0.325137] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] >>> [ 0.325139] pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfcfffff] >>> [ 0.325141] pci_bus 0000:02: resource 2 [mem 0xdfd00000-0xdfefffff 64bit >>> pref] >>> [ 0.325143] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff] >>> [ 0.325183] NET: Registered protocol family 2 >>> [ 0.325470] TCP established hash table entries: 65536 (order: 7, 524288 >>> bytes) >>> [ 0.325725] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >>> [ 0.325988] TCP: Hash tables configured (established 65536 bind 65536) >>> [ 0.326114] UDP hash table entries: 4096 (order: 5, 131072 bytes) >>> [ 0.326238] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) >>> [ 0.326419] NET: Registered protocol family 1 >>> [ 0.326594] RPC: Registered named UNIX socket transport module. >>> [ 0.326696] RPC: Registered udp transport module. >>> [ 0.326790] RPC: Registered tcp transport module. >>> [ 0.326885] RPC: Registered tcp NFSv4.1 backchannel transport module. >>> [ 0.327064] pci 0000:00:02.0: Video device with shadowed ROM at [mem >>> 0x000c0000-0x000dffff] >>> [ 0.327700] PCI: CLS 64 bytes, default 64 >>> [ 0.327729] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >>> [ 0.327832] software IO TLB [mem 0xca210000-0xce210000] (64MB) mapped at >>> [ffff8800ca210000-ffff8800ce20ffff] >>> [ 0.328082] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 >>> ms ovfl timer >>> [ 0.329310] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules >>> [ 0.329408] RAPL PMU: hw unit of domain package 2^-14 Joules >>> [ 0.329504] RAPL PMU: hw unit of domain dram 2^-14 Joules >>> [ 0.329601] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules >>> [ 0.330119] Scanning for low memory corruption every 60 seconds >>> [ 0.330598] futex hash table entries: 2048 (order: 5, 131072 bytes) >>> [ 0.330737] audit: initializing netlink subsys (disabled) >>> [ 0.330844] audit: type=2000 audit(1466276474.314:1): initialized >>> [ 0.331567] workingset: timestamp_bits=60 max_order=21 bucket_order=0 >>> [ 0.335140] NFS: Registering the id_resolver key type >>> [ 0.335246] Key type id_resolver registered >>> [ 0.335342] Key type id_legacy registered >>> [ 0.335501] fuse init (API version 7.24) >>> [ 0.336731] Block layer SCSI generic (bsg) driver version 0.4 loaded >>> (major 251) >>> [ 0.336885] io scheduler noop registered >>> [ 0.337038] io scheduler deadline registered >>> [ 0.337177] io scheduler cfq registered (default) >>> [ 0.337649] intel_idle: MWAIT substates: 0x11142120 >>> [ 0.337652] intel_idle: v0.4.1 model 0x45 >>> [ 0.337924] intel_idle: lapic_timer_reliable_states 0xffffffff >>> [ 0.338106] ACPI: AC Adapter [AC] (on-line) >>> [ 0.338281] input: Lid Switch as >>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 >>> [ 0.338560] ACPI: Lid Switch [LID] >>> [ 0.338697] input: Sleep Button as >>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 >>> [ 0.338852] ACPI: Sleep Button [SLPB] >>> [ 0.339076] input: Power Button as >>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 >>> [ 0.339229] ACPI: Power Button [PWRF] >>> [ 0.340623] thermal LNXTHERM:00: registered as thermal_zone0 >>> [ 0.340724] ACPI: Thermal Zone [THM0] (45 C) >>> [ 0.340893] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled >>> [ 0.341643] Non-volatile memory driver v1.3 >>> [ 0.341812] Linux agpgart interface v0.103 >>> [ 0.341990] [drm] Initialized drm 1.1.0 20060810 >>> [ 0.342731] [drm] Memory usable by graphics device = 2048M >>> [ 0.342883] [drm] Replacing VGA console driver >>> [ 0.344095] Console: switching to colour dummy device 80x25 >>> [ 0.349322] ACPI: Battery Slot [BAT0] (battery present) >>> [ 0.350072] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). >>> [ 0.350078] [drm] Driver supports precise vblank timestamp query. >>> [ 0.350404] vgaarb: device changed decodes: >>> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem >>> [ 0.389347] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) >>> [ 0.389938] input: Video Bus as >>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 >>> [ 0.389997] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on >>> minor 0 >>> [ 0.391982] loop: module loaded >>> [ 0.392110] ahci 0000:00:1f.2: version 3.0 >>> [ 0.402379] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 >>> impl SATA mode >>> [ 0.402393] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum >>> part deso sadm sds apst >>> [ 0.402925] scsi host0: ahci >>> [ 0.403073] scsi host1: ahci >>> [ 0.403179] scsi host2: ahci >>> [ 0.403233] ata1: SATA max UDMA/133 abar m2048@0xf053c000 port 0xf053c100 >>> irq 41 >>> [ 0.403240] ata2: DUMMY >>> [ 0.403244] ata3: DUMMY >>> [ 0.403383] e1000: Intel(R) PRO/1000 Network Driver - version >>> 7.3.21-k8-NAPI >>> [ 0.403389] e1000: Copyright (c) 1999-2006 Intel Corporation. >>> [ 0.403412] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k >>> [ 0.403417] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. >>> [ 0.403584] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set >>> to dynamic conservative mode >>> [ 0.566997] fbcon: inteldrmfb (fb0) is primary device >>> [ 0.706983] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >>> [ 0.719971] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) >>> succeeded >>> [ 0.719974] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) >>> filtered out >>> [ 0.722129] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) >>> succeeded >>> [ 0.727893] ata1.00: supports DRM functions and may not be fully >>> accessible >>> [ 0.730026] ata1.00: ATA-9: INTEL SSDSCKGF180A4L, LSTi, max UDMA/133 >>> [ 0.730029] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth >>> 31/32), AA >>> [ 0.750022] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) >>> succeeded >>> [ 0.750024] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) >>> filtered out >>> [ 0.752120] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) >>> succeeded >>> [ 0.757897] ata1.00: supports DRM functions and may not be fully >>> accessible >>> [ 0.767970] ata1.00: configured for UDMA/133 >>> [ 0.826761] e1000e 0000:00:19.0 eth0: registered PHC clock >>> [ 0.826763] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) >>> 54:ee:75:07:92:a9 >>> [ 0.826764] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network >>> Connection >>> [ 0.826801] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: >>> 1000FF-0FF >>> [ 0.826834] igb: Intel(R) Gigabit Ethernet Network Driver - version >>> 5.3.0-k >>> [ 0.826834] igb: Copyright (c) 2007-2014 Intel Corporation. >>> [ 0.826858] igbvf: Intel(R) Gigabit Virtual Function Network Driver - >>> version 2.0.2-k >>> [ 0.826858] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. >>> [ 0.826973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >>> [ 0.826976] ehci-pci: EHCI PCI platform driver >>> [ 0.827128] ehci-pci 0000:00:1d.0: EHCI Host Controller >>> [ 0.827182] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus >>> number 1 >>> [ 0.827195] ehci-pci 0000:00:1d.0: debug port 2 >>> [ 0.831108] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported >>> [ 0.831122] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf053d000 >>> [ 0.837021] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >>> [ 0.837071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 >>> [ 0.837072] usb usb1: New USB device strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> [ 0.837074] usb usb1: Product: EHCI Host Controller >>> [ 0.837075] usb usb1: Manufacturer: Linux 4.6.2 ehci_hcd >>> [ 0.837076] usb usb1: SerialNumber: 0000:00:1d.0 >>> [ 0.837271] hub 1-0:1.0: USB hub found >>> [ 0.837279] hub 1-0:1.0: 3 ports detected >>> [ 0.837469] ehci-platform: EHCI generic platform driver >>> [ 0.837496] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>> [ 0.837512] ohci-pci: OHCI PCI platform driver >>> [ 0.837537] uhci_hcd: USB Universal Host Controller Interface driver >>> [ 0.837680] xhci_hcd 0000:00:14.0: xHCI Host Controller >>> [ 0.837736] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus >>> number 2 >>> [ 0.838822] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version >>> 0x100 quirks 0x0004b810 >>> [ 0.838827] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported >>> [ 0.838910] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 >>> [ 0.838911] usb usb2: New USB device strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> [ 0.838912] usb usb2: Product: xHCI Host Controller >>> [ 0.838913] usb usb2: Manufacturer: Linux 4.6.2 xhci-hcd >>> [ 0.838914] usb usb2: SerialNumber: 0000:00:14.0 >>> [ 0.839063] hub 2-0:1.0: USB hub found >>> [ 0.839077] hub 2-0:1.0: 9 ports detected >>> [ 0.841021] xhci_hcd 0000:00:14.0: xHCI Host Controller >>> [ 0.841068] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus >>> number 3 >>> [ 0.841107] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 >>> [ 0.841108] usb usb3: New USB device strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> [ 0.841110] usb usb3: Product: xHCI Host Controller >>> [ 0.841111] usb usb3: Manufacturer: Linux 4.6.2 xhci-hcd >>> [ 0.841112] usb usb3: SerialNumber: 0000:00:14.0 >>> [ 0.841243] hub 3-0:1.0: USB hub found >>> [ 0.841254] hub 3-0:1.0: 4 ports detected >>> [ 0.842267] usbcore: registered new interface driver usblp >>> [ 0.842305] usbcore: registered new interface driver usb-storage >>> [ 0.842355] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at >>> 0x60,0x64 irq 1,12 >>> [ 0.844196] serio: i8042 KBD port at 0x60,0x64 irq 1 >>> [ 0.844200] serio: i8042 AUX port at 0x60,0x64 irq 12 >>> [ 0.844360] mousedev: PS/2 mouse device common for all mice >>> [ 0.844656] rtc_cmos 00:02: RTC can wake from S4 >>> [ 0.844821] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 >>> [ 0.844848] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, >>> hpet irqs >>> [ 0.845003] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt >>> [ 0.845876] input: AT Translated Set 2 keyboard as >>> /devices/platform/i8042/serio0/input/input4 >>> [ 0.846822] IR NEC protocol handler initialized >>> [ 0.846826] IR RC5(x/sz) protocol handler initialized >>> [ 0.846829] IR RC6 protocol handler initialized >>> [ 0.846833] IR JVC protocol handler initialized >>> [ 0.846836] IR Sony protocol handler initialized >>> [ 0.846840] IR SANYO protocol handler initialized >>> [ 0.846843] IR Sharp protocol handler initialized >>> [ 0.846847] IR MCE Keyboard/mouse protocol handler initialized >>> [ 0.846850] IR XMP protocol handler initialized >>> [ 0.846875] usbcore: registered new interface driver uvcvideo >>> [ 0.846876] USB Video Class driver (1.1.1) >>> [ 0.847024] Bluetooth: HCI UART driver ver 2.3 >>> [ 0.847026] Bluetooth: HCI UART protocol H4 registered >>> [ 0.847026] Bluetooth: HCI UART protocol BCSP registered >>> [ 0.847027] Bluetooth: HCI UART protocol LL registered >>> [ 0.847028] Bluetooth: HCI UART protocol ATH3K registered >>> [ 0.847028] Bluetooth: HCI UART protocol Three-wire (H5) registered >>> [ 0.847048] usbcore: registered new interface driver btusb >>> [ 0.847088] hidraw: raw HID events driver (C) Jiri Kosina >>> [ 0.847332] usbcore: registered new interface driver usbhid >>> [ 0.847333] usbhid: USB HID core driver >>> [ 0.847613] Netfilter messages via NETLINK v0.30. >>> [ 0.847630] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) >>> [ 0.847986] Initializing XFRM netlink socket >>> [ 0.847994] NET: Registered protocol family 17 >>> [ 0.848034] Bluetooth: RFCOMM TTY layer initialized >>> [ 0.848037] Bluetooth: RFCOMM socket layer initialized >>> [ 0.848041] Bluetooth: RFCOMM ver 1.11 >>> [ 0.848048] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 >>> [ 0.848052] Bluetooth: HIDP socket layer initialized >>> [ 0.848083] Key type dns_resolver registered >>> [ 0.848373] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c >>> [ 0.848382] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c >>> [ 0.848394] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c >>> [ 0.848404] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c >>> [ 0.848441] microcode: Microcode Update Driver: v2.01 >>> <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba >>> [ 0.848652] registered taskstats version 1 >>> [ 0.849234] Magic number: 4:330:41 >>> [ 0.849250] bdi 7:6: hash matches >>> [ 1.139039] usb 1-1: new high-speed USB device number 2 using ehci-pci >>> [ 1.194038] usb 2-4: new high-speed USB device number 2 using xhci_hcd >>> [ 1.253766] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 >>> [ 1.253768] usb 1-1: New USB device strings: Mfr=0, Product=0, >>> SerialNumber=0 >>> [ 1.254036] hub 1-1:1.0: USB hub found >>> [ 1.254260] hub 1-1:1.0: 8 ports detected >>> [ 1.329990] psmouse serio1: synaptics: queried max coordinates: x >>> [..5112], y [..3834] >>> [ 1.330000] tsc: Refined TSC clocksource calibration: 2294.686 MHz >>> [ 1.330002] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: >>> 0x211399552f8, max_idle_ns: 440795292447 ns >>> [ 1.363006] psmouse serio1: synaptics: queried min coordinates: x >>> [1024..], y [1024..] >>> [ 1.363011] psmouse serio1: synaptics: quirked min/max coordinates: x >>> [1024..5112], y [2024..4832] >>> [ 1.365412] usb 2-4: New USB device found, idVendor=1199, idProduct=a001 >>> [ 1.365414] usb 2-4: New USB device strings: Mfr=1, Product=2, >>> SerialNumber=3 >>> [ 1.365415] usb 2-4: Product: Sierra Wireless EM7345 4G LTE >>> [ 1.365417] usb 2-4: Manufacturer: Sierra Wireless Inc. >>> [ 1.365418] usb 2-4: SerialNumber: 013937000496677 >>> [ 1.425952] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: >>> 0x1e2b1, caps: 0xd002a3/0x940300/0x127c00/0x0, board id: 2668, fw id: >>> 1545510 >>> [ 1.425980] psmouse serio1: synaptics: serio: Synaptics pass-through port >>> at isa0060/serio1/input0 >>> [ 1.467198] input: SynPS/2 Synaptics TouchPad as >>> /devices/platform/i8042/serio1/input/input6 >>> [ 1.530046] usb 1-1.8: new high-speed USB device number 3 using ehci-pci >>> [ 1.530963] usb 2-6: new full-speed USB device number 3 using xhci_hcd >>> [ 1.640531] usb 1-1.8: New USB device found, idVendor=04f2, >>> idProduct=b3f5 >>> [ 1.640534] usb 1-1.8: New USB device strings: Mfr=3, Product=1, >>> SerialNumber=2 >>> [ 1.640535] usb 1-1.8: Product: Integrated Camera >>> [ 1.640536] usb 1-1.8: Manufacturer: Chicony Electronics Co.,Ltd. >>> [ 1.640537] usb 1-1.8: SerialNumber: 0x0001 >>> [ 1.642187] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b3f5) >>> [ 1.643866] input: Integrated Camera as >>> /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input8 >>> [ 1.697658] usb 2-6: New USB device found, idVendor=138a, idProduct=0017 >>> [ 1.697660] usb 2-6: New USB device strings: Mfr=0, Product=0, >>> SerialNumber=1 >>> [ 1.697661] usb 2-6: SerialNumber: 78916408f2b4 >>> [ 1.851001] usb 2-7: new full-speed USB device number 4 using xhci_hcd >>> [ 2.002995] Console: switching to colour frame buffer device 320x90 >>> [ 2.016156] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc >>> [ 2.016159] usb 2-7: New USB device strings: Mfr=0, Product=0, >>> SerialNumber=0 >>> [ 2.029636] Bluetooth: hci0: read Intel version: 370710018002030d00 >>> [ 2.029651] bluetooth hci0: Direct firmware load for >>> intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq failed with error -2 >>> [ 2.029653] Bluetooth: hci0 failed to open Intel firmware file: >>> intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq(-2) >>> [ 2.029661] bluetooth hci0: Direct firmware load for >>> intel/ibt-hw-37.7.bseq failed with error -2 >>> [ 2.029662] Bluetooth: hci0 failed to open default Intel fw file: >>> intel/ibt-hw-37.7.bseq >>> [ 2.117813] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, >>> buttons: 3/3 >>> [ 2.162388] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device >>> [ 2.164476] console [netcon0] enabled >>> [ 2.166461] netconsole: network logging started >>> [ 2.169571] PM: Hibernation image not present or could not be loaded. >>> [ 2.169576] ALSA device list: >>> [ 2.171571] No soundcards found. >>> [ 2.175327] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSCKGF18 >>> LSTi PQ: 0 ANSI: 5 >>> [ 2.190402] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 >>> GB/168 GiB) >>> [ 2.190411] sd 0:0:0:0: Attached scsi generic sg0 type 0 >>> [ 2.196003] sd 0:0:0:0: [sda] 4096-byte physical blocks >>> [ 2.199406] sd 0:0:0:0: [sda] Write Protect is off >>> [ 2.202721] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> [ 2.202761] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, >>> doesn't support DPO or FUA >>> [ 2.208859] sda: sda1 sda2 sda3 >>> [ 2.210887] sd 0:0:0:0: [sda] Attached SCSI disk >>> [ 2.330247] clocksource: Switched to clocksource tsc >>> [ 2.334213] input: TPPS/2 IBM TrackPoint as >>> /devices/platform/i8042/serio1/serio2/input/input7 >>> [ 2.416442] EXT4-fs (sda3): couldn't mount as ext3 due to feature >>> incompatibilities >>> [ 2.425152] EXT4-fs (sda3): mounted filesystem with ordered data mode. >>> Opts: (null) >>> [ 2.426963] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. >>> [ 2.428912] devtmpfs: mounted >>> [ 2.431403] Freeing unused kernel memory: 1084K (ffffffff81f14000 - >>> ffffffff82023000) >>> [ 2.432636] Write protecting the kernel read-only data: 14336k >>> [ 2.434250] Freeing unused kernel memory: 1228K (ffff8800018cd000 - >>> ffff880001a00000) >>> [ 2.438522] Freeing unused kernel memory: 1328K (ffff880001cb4000 - >>> ffff880001e00000) >>> [ 2.493209] setfont (1160) used greatest stack depth: 13656 bytes left >>> [ 2.522615] init-early.sh (1159) used greatest stack depth: 13048 bytes >>> left >>> [ 2.903608] systemd-udevd[1373]: starting version 218 >>> [ 2.907958] systemd-udevd[1373]: Network interface NamePolicy= disabled >>> on kernel command line, ignoring. >>> [ 2.908114] random: systemd-udevd urandom read with 38 bits of entropy >>> available >>> [ 3.016335] thinkpad_acpi: ThinkPad ACPI Extras v0.25 >>> [ 3.016339] thinkpad_acpi: http://ibm-acpi.sf.net/ >>> [ 3.016341] thinkpad_acpi: ThinkPad BIOS GRET46WW (1.23 ), EC unknown >>> [ 3.016342] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 2nd, model >>> 20A7005MGE >>> [ 3.017094] thinkpad_acpi: unknown version of the HKEY interface: 0x200 >>> [ 3.017097] thinkpad_acpi: please report this to >>> ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx >>> [ 3.017105] thinkpad_acpi: radio switch found; radios are enabled >>> [ 3.017121] thinkpad_acpi: This ThinkPad has standard ACPI backlight >>> brightness control, supported by the ACPI video driver >>> [ 3.017122] thinkpad_acpi: Disabling thinkpad-acpi brightness events by >>> default... >>> [ 3.018688] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is >>> unblocked >>> [ 3.019369] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is >>> unblocked >>> [ 3.019849] systemd-udevd[1374]: Network interface NamePolicy= disabled >>> on kernel command line, ignoring. >>> [ 3.020801] thinkpad_acpi: warning: userspace override of important >>> firmware LEDs is enabled >>> [ 3.022038] input: ThinkPad Extra Buttons as >>> /devices/platform/thinkpad_acpi/input/input9 >>> [ 3.022538] systemd-udevd (1407) used greatest stack depth: 12944 bytes >>> left >>> [ 3.046029] Intel(R) Wireless WiFi driver for Linux >>> [ 3.046032] Copyright(c) 2003- 2015 Intel Corporation >>> [ 3.049928] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops >>> 0xffffffff81a84050) >>> [ 3.061421] iwlwifi 0000:03:00.0: loaded firmware version 17.265642.0 >>> op_mode iwlmvm >>> [ 3.064140] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: >>> line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker >>> [ 3.064145] snd_hda_codec_generic hdaudioC1D0: speaker_outs=0 >>> (0x0/0x0/0x0/0x0/0x0) >>> [ 3.064148] snd_hda_codec_generic hdaudioC1D0: hp_outs=1 >>> (0x15/0x0/0x0/0x0/0x0) >>> [ 3.064150] snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0 >>> [ 3.064151] snd_hda_codec_generic hdaudioC1D0: inputs: >>> [ 3.064154] snd_hda_codec_generic hdaudioC1D0: Mic=0x1a >>> [ 3.064156] snd_hda_codec_generic hdaudioC1D0: Internal Mic=0x12 >>> [ 3.068860] input: HDA Intel PCH Mic as >>> /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 >>> [ 3.068965] snd_hda_intel 0000:00:03.0: Too many HDMI devices >>> [ 3.068969] snd_hda_intel 0000:00:03.0: Consider building the kernel with >>> CONFIG_SND_DYNAMIC_MINORS=y >>> [ 3.069120] input: HDA Intel PCH Headphone as >>> /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 >>> [ 3.069343] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC >>> 7260, REV=0x144 >>> [ 3.069833] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled >>> [ 3.070499] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled >>> [ 3.071665] input: HDA Intel HDMI HDMI/DP,pcm=3 as >>> /devices/pci0000:00/0000:00:03.0/sound/card0/input12 >>> [ 3.072275] input: HDA Intel HDMI HDMI/DP,pcm=7 as >>> /devices/pci0000:00/0000:00:03.0/sound/card0/input13 >>> [ 3.072467] input: HDA Intel HDMI HDMI/DP as >>> /devices/pci0000:00/0000:00:03.0/sound/card0/input14 >>> [ 3.091091] cdc_ncm 2-4:1.0: MAC-Address: ff:ff:ff:ff:ff:ff >>> [ 3.091096] cdc_ncm 2-4:1.0: setting rx_max = 16384 >>> [ 3.091872] cdc_ncm 2-4:1.0 usb0: register 'cdc_ncm' at >>> usb-0000:00:14.0-4, CDC NCM, ff:ff:ff:ff:ff:ff >>> [ 3.091903] usbcore: registered new interface driver cdc_ncm >>> [ 3.277887] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' >>> [ 3.438586] EXT4-fs (sda3): re-mounted. Opts: (null) >>> [ 3.528197] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 >>> across:2097148k SS >>> [ 5.869460] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled >>> [ 5.870078] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled >>> [ 6.062495] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled >>> [ 6.063115] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled >>> [ 6.092691] ip (2349) used greatest stack depth: 12192 bytes left >>> [ 8.685944] random: nonblocking pool is initialized >>> [ 9.368752] wlan0: authenticate with e4:f4:c6:0a:bb:8b >>> [ 9.372797] wlan0: send auth to e4:f4:c6:0a:bb:8b (try 1/3) >>> [ 9.373419] wlan0: authenticated >>> [ 9.374132] wlan0: associate with e4:f4:c6:0a:bb:8b (try 1/3) >>> [ 9.375186] wlan0: RX AssocResp from e4:f4:c6:0a:bb:8b (capab=0x1011 >>> status=0 aid=1) >>> [ 9.376508] wlan0: associated >>> [ 55.030187] usb 2-2: new high-speed USB device number 5 using xhci_hcd >>> [ 55.194925] usb 2-2: New USB device found, idVendor=2040, idProduct=0264 >>> [ 55.194934] usb 2-2: New USB device strings: Mfr=3, Product=1, >>> SerialNumber=2 >>> [ 55.194939] usb 2-2: Product: soloHD >>> [ 55.194942] usb 2-2: Manufacturer: HCW >>> [ 55.194945] usb 2-2: SerialNumber: 0011548565 >>> [ 55.386950] em28xx: New device HCW soloHD @ 480 Mbps (2040:0264, >>> interface 0, class 0) >>> [ 55.386956] em28xx: DVB interface 0 found: isoc >>> [ 55.387013] em28xx: chip ID is em28178 >>> [ 57.321297] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xcce4cb04 >>> [ 57.321304] em28178 #0: EEPROM info: >>> [ 57.321307] em28178 #0: microcode start address = 0x0004, boot >>> configuration = 0x01 >>> [ 57.328249] em28178 #0: AC97 audio (5 sample rates) >>> [ 57.328256] em28178 #0: 500mA max power >>> [ 57.328260] em28178 #0: Table at offset 0x27, strings=0x0e6a, >>> 0x1888, 0x087e >>> [ 57.328360] em28178 #0: Identified as PCTV tripleStick (292e) (card=94) >>> [ 57.328366] em28178 #0: dvb set to isoc mode. >>> [ 57.328423] usbcore: registered new interface driver em28xx >>> [ 57.335752] em28178 #0: Binding DVB extension >>> [ 57.338179] i2c i2c-11: Added multiplexed i2c bus 12 >>> [ 57.338185] si2168 11-0064: Silicon Labs Si2168 successfully attached >>> [ 57.340481] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158 >>> successfully attached >>> [ 57.340490] DVB: registering new adapter (em28178 #0) >>> [ 57.340494] usb 2-2: DVB: registering adapter 0 frontend 0 (Silicon Labs >>> Si2168)... >>> [ 57.340896] em28178 #0: DVB extension successfully initialized >>> [ 57.340901] em28xx: Registered (Em28xx dvb Extension) extension >>> [ 57.343406] em28178 #0: Registering input extension >>> [ 57.343526] Registered IR keymap rc-pinnacle-pctv-hd >>> [ 57.343608] input: em28xx IR (em28178 #0) as >>> /devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0/input15 >>> [ 57.343680] rc rc0: em28xx IR (em28178 #0) as >>> /devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0 >>> [ 57.343787] em28178 #0: Input extension successfully initalized >>> [ 57.343789] em28xx: Registered (Em28xx Input Extension) extension >>> [ 101.423697] si2168 11-0064: found a 'Silicon Labs Si2168-B40' >>> [ 101.428693] si2168 11-0064: downloading firmware from file >>> 'dvb-demod-si2168-b40-01.fw' >>> [ 101.657999] si2168 11-0064: firmware version: 4.0.11 >>> [ 101.661225] si2157 12-0060: found a 'Silicon Labs Si2157-A30' >>> [ 101.709738] si2157 12-0060: firmware version: 3.0.5 >>> >>> >>> Another thing. At the end of w_scan i get: >>> >>> tune to: QAM_16 f = 778000 kHz I999B8C23D0T8G8Y0 (8468:12297:2305) (time: >>> 05:43.352) >>> service = 1-2-3.tv (MEDIA BROADCAST) >>> service = RTLNITRO (MEDIA BROADCAST) >>> service = TLC (MEDIA BROADCAST) >>> service = JuweloSK (MEDIA BROADCAST) >>> tune to: QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0 >>> (8468:12352:16481) (time: 05:57.355) >>> ----------no signal---------- >>> tune to: QAM_AUTO f = 650000 kHz I999B8C999D999T999G999Y999P0 >>> (8468:12352:16481) (time: 06:03.441) (no signal) >>> ----------no signal---------- >>> tune to: QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1 (8468:12352:16497) >>> (time: 06:09.478) >>> updating transponder: >>> (QAM_AUTO f = 650000 kHz I999B8C999D999T999G999Y999P0 >>> (8468:12352:16481)) 0x0000 >>> to (QAM_AUTO f = 650000 kHz I999B8C0D0T32G16Y0P0 (8468:12352:16481)) >>> 0x4004 >>> service = ssu (Harmonic) >>> service = multithek dvb-t (Internet) (Media Broadcast) >>> tune to: QAM_64 f = 578000 kHz I999B8C23D0T8G4Y0 (8468:12348:15361) (time: >>> 06:25.355) >>> ----------no signal---------- >>> tune to: QAM_AUTO f = 578000 kHz I999B8C999D0T999G999Y0 (8468:12348:15361) >>> (time: 06:31.436) (no signal) >>> ----------no signal---------- >>> tune to: QAM_16 f = 730000 kHz I999B8C34D0T8G4Y0 (8468:12361:18689) (time: >>> 06:37.533) >>> ----------no signal---------- >>> tune to: QAM_AUTO f = 730000 kHz I999B8C999D0T999G999Y0 (8468:12361:18689) >>> (time: 06:43.620) (no signal) >>> ----------no signal---------- >>> tune to: QAM_16 f = 762000 kHz I999B8C23D0T8G4Y0 (8468:12368:20481) (time: >>> 06:49.706) >>> ----------no signal---------- >>> tune to: QAM_AUTO f = 762000 kHz I999B8C999D0T999G999Y0 (8468:12368:20481) >>> (time: 06:55.793) (no signal) >>> ----------no signal---------- >>> retrying with center_frequency = 514000000 >>> tune to: QAM_16 f = 514000 kHz I999B8C23D0T8G4Y0 (8468:12306:4609) (time: >>> 07:01.879) >>> ----------no signal---------- >>> tune to: QAM_AUTO f = 514000 kHz I999B8C999D0T999G999Y0 (8468:12306:4609) >>> (time: 07:07.964) (no signal) >>> ----------no signal---------- >>> tune to: QAM_64 f = 474000 kHz I999B8C23D0T8G4Y0 (8468:12346:14849) (time: >>> 07:14.051) >>> ----------no signal---------- >>> tune to: QAM_AUTO f = 474000 kHz I999B8C999D0T999G999Y0 (8468:12346:14849) >>> (time: 07:20.138) (no signal) >>> ----------no signal---------- >>> (time: 07:26.222) dumping lists (57 services) >>> >>> Is that helping? >>> >>> thanks again. >>> >>> t. >>> >>> >>> >>> On 2016-06-18 18:56, Olli Salonen wrote: >>>> >>>> Hi Thomas, >>>> >>>> Please reboot your PC, run w_scan and then send the full output of >>>> dmesg command. Maybe the driver has printed something in the logs that >>>> can help us narrow the cause. >>>> >>>> Cheers, >>>> -olli >>>> >>>> On 18 June 2016 at 18:55, Thomas Stein <himbeere@xxxxxxxxxxxx> wrote: >>>>> >>>>> Hello. >>>>> >>>>> I'm trying to get a dvb usb stick Hauppauge WinTV-soloHD running. I saw >>>>> there is general support already in the kernel. >>>>> >>>>> https://git.linuxtv.org/media_tree.git/commit/?id=1efc21701d94ed0c5b91467b042bed8b8becd5cc >>>>> >>>>> I'm able to use this device for dvb-t but not dvb-t2. I'm living in >>>>> berlin >>>>> so it should work. w_scan is scanning dvb-t2 and seems >>>>> to find channels: >>>>> >>>>> Scanning DVB-T2... >>>>> Scanning 7MHz frequencies... >>>>> 177500: (time: 02:17.828) >>>>> 184500: (time: 02:19.828) >>>>> 191500: (time: 02:21.876) >>>>> 198500: (time: 02:23.924) >>>>> 205500: (time: 02:25.971) >>>>> 212500: (time: 02:27.971) >>>>> 219500: (time: 02:30.021) >>>>> 226500: (time: 02:32.071) >>>>> Scanning 8MHz frequencies... >>>>> 474000: (time: 02:34.120) >>>>> 482000: (time: 02:36.121) >>>>> 490000: (time: 02:38.169) >>>>> 498000: (time: 02:40.219) >>>>> 506000: skipped (already known transponder) >>>>> 514000: (time: 02:42.268) >>>>> 522000: skipped (already known transponder) >>>>> 530000: (time: 02:44.318) >>>>> 538000: (time: 02:46.368) >>>>> 546000: (time: 02:48.417) >>>>> 554000: (time: 02:50.417) >>>>> 562000: (time: 02:52.467) >>>>> 570000: skipped (already known transponder) >>>>> 578000: (time: 02:54.467) >>>>> 586000: (time: 02:56.469) >>>>> 594000: (time: 02:58.469) >>>>> 602000: (time: 03:00.518) >>>>> 610000: (time: 03:02.567) >>>>> 618000: skipped (already known transponder) >>>>> 626000: (time: 03:04.617) >>>>> 634000: (time: 03:06.617) >>>>> 642000: (time: 03:08.667) signal ok: QAM_AUTO f = 642000 kHz >>>>> I999B8C999D999T999G999Y999P0 (0:0:0) >>>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) : >>>>> updating transport_stream_id: -> (0:0:16481) >>>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:16481) >>>>> : >>>>> updating network_id -> (0:12352:16481) >>>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 >>>>> (0:12352:16481) >>>>> : updating original_network_id -> (8468:12352:16481) >>>>> updating transponder: >>>>> (QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 >>>>> (8468:12352:16481)) 0x0000 >>>>> to (QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0 >>>>> (8468:12352:16481)) 0x4004 >>>>> new transponder: (QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1 >>>>> (8468:12352:16497)) 0x4004 >>>>> 650000: skipped (already known transponder) >>>>> 658000: skipped (already known transponder) >>>>> 666000: (time: 03:10.382) >>>>> 674000: (time: 03:12.429) >>>>> 682000: skipped (already known transponder) >>>>> 690000: (time: 03:14.476) >>>>> 698000: (time: 03:16.528) >>>>> 706000: skipped (already known transponder) >>>>> 714000: (time: 03:18.575) >>>>> 722000: (time: 03:20.623) >>>>> 730000: (time: 03:22.669) >>>>> 738000: (time: 03:24.716) >>>>> 746000: (time: 03:26.764) >>>>> 754000: skipped (already known transponder) >>>>> 762000: (time: 03:28.811) >>>>> 770000: (time: 03:30.860) >>>>> 778000: skipped (already known transponder) >>>>> 786000: (time: 03:32.908) >>>>> 794000: (time: 03:34.953) >>>>> 802000: (time: 03:36.999) >>>>> 810000: (time: 03:39.045) >>>>> 818000: (time: 03:41.045) >>>>> 826000: (time: 03:43.091) >>>>> 834000: (time: 03:45.137) >>>>> 842000: (time: 03:47.185) >>>>> 850000: (time: 03:49.231) >>>>> 858000: (time: 03:51.277) >>>>> >>>>> So the question is, what is going wrong? When i start vlc with dvb-t2 >>>>> channels file for berlin i get: >>>>> >>>>> [00007f7e0c01a0e8] ts demux error: cannot peek >>>>> >>>>> Any hints appreciated. >>>>> >>>>> cheers >>>>> t. >>>> >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe linux-media" in >>>> the body of a message to majordomo@xxxxxxxxxxxxxxx >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
