Hi Thomas, Please reboot your PC, run w_scan and then send the full output of dmesg command. Maybe the driver has printed something in the logs that can help us narrow the cause. Cheers, -olli On 18 June 2016 at 18:55, Thomas Stein <himbeere@xxxxxxxxxxxx> wrote: > Hello. > > I'm trying to get a dvb usb stick Hauppauge WinTV-soloHD running. I saw > there is general support already in the kernel. > https://git.linuxtv.org/media_tree.git/commit/?id=1efc21701d94ed0c5b91467b042bed8b8becd5cc > > I'm able to use this device for dvb-t but not dvb-t2. I'm living in berlin > so it should work. w_scan is scanning dvb-t2 and seems > to find channels: > > Scanning DVB-T2... > Scanning 7MHz frequencies... > 177500: (time: 02:17.828) > 184500: (time: 02:19.828) > 191500: (time: 02:21.876) > 198500: (time: 02:23.924) > 205500: (time: 02:25.971) > 212500: (time: 02:27.971) > 219500: (time: 02:30.021) > 226500: (time: 02:32.071) > Scanning 8MHz frequencies... > 474000: (time: 02:34.120) > 482000: (time: 02:36.121) > 490000: (time: 02:38.169) > 498000: (time: 02:40.219) > 506000: skipped (already known transponder) > 514000: (time: 02:42.268) > 522000: skipped (already known transponder) > 530000: (time: 02:44.318) > 538000: (time: 02:46.368) > 546000: (time: 02:48.417) > 554000: (time: 02:50.417) > 562000: (time: 02:52.467) > 570000: skipped (already known transponder) > 578000: (time: 02:54.467) > 586000: (time: 02:56.469) > 594000: (time: 02:58.469) > 602000: (time: 03:00.518) > 610000: (time: 03:02.567) > 618000: skipped (already known transponder) > 626000: (time: 03:04.617) > 634000: (time: 03:06.617) > 642000: (time: 03:08.667) signal ok: QAM_AUTO f = 642000 kHz > I999B8C999D999T999G999Y999P0 (0:0:0) > QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) : > updating transport_stream_id: -> (0:0:16481) > QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:16481) : > updating network_id -> (0:12352:16481) > QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:12352:16481) > : updating original_network_id -> (8468:12352:16481) > updating transponder: > (QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 > (8468:12352:16481)) 0x0000 > to (QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0 > (8468:12352:16481)) 0x4004 > new transponder: (QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1 > (8468:12352:16497)) 0x4004 > 650000: skipped (already known transponder) > 658000: skipped (already known transponder) > 666000: (time: 03:10.382) > 674000: (time: 03:12.429) > 682000: skipped (already known transponder) > 690000: (time: 03:14.476) > 698000: (time: 03:16.528) > 706000: skipped (already known transponder) > 714000: (time: 03:18.575) > 722000: (time: 03:20.623) > 730000: (time: 03:22.669) > 738000: (time: 03:24.716) > 746000: (time: 03:26.764) > 754000: skipped (already known transponder) > 762000: (time: 03:28.811) > 770000: (time: 03:30.860) > 778000: skipped (already known transponder) > 786000: (time: 03:32.908) > 794000: (time: 03:34.953) > 802000: (time: 03:36.999) > 810000: (time: 03:39.045) > 818000: (time: 03:41.045) > 826000: (time: 03:43.091) > 834000: (time: 03:45.137) > 842000: (time: 03:47.185) > 850000: (time: 03:49.231) > 858000: (time: 03:51.277) > > So the question is, what is going wrong? When i start vlc with dvb-t2 > channels file for berlin i get: > > [00007f7e0c01a0e8] ts demux error: cannot peek > > Any hints appreciated. > > cheers > t. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
