I decided to try a different card that is reported to work, so I
bought myself a HVR-2200.
Drivers compiled cleanly. I extracted the firmware and the driver is
loading well. The second frontend is showing a little irregular in
dmesg - (registering adapter 1 frontend -906461813), but otherwise it
looks good.
Here is an extract out of dmesg
[ 34.040118] saa7164_downloadimage() Image downloaded, booting...
[ 34.150107] saa7164_downloadimage() Image booted successfully.
[ 34.150134] starting firmware download(2)
[ 36.490112] saa7164_downloadimage() Image downloaded, booting...
[ 37.920114] saa7164_downloadimage() Image booted successfully.
[ 37.920142] firmware download complete.
[ 37.921063] saa7164[0]: i2c bus 0 registered
[ 37.921109] saa7164[0]: i2c bus 1 registered
[ 37.921146] saa7164[0]: i2c bus 2 registered
[ 37.963260] tveeprom 0-0000: Hauppauge model 89619, rev D2F2,
serial# 6346393
[ 37.963262] tveeprom 0-0000: MAC address is 00-0D-FE-60-D6-99
[ 37.963263] tveeprom 0-0000: tuner model is NXP 18271C2_716x (idx
152, type 4)
[ 37.963265] tveeprom 0-0000: TV standards PAL(B/G) NTSC(M) PAL(I)
SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 37.963267] tveeprom 0-0000: audio processor is SAA7164 (idx 43)
[ 37.963268] tveeprom 0-0000: decoder processor is SAA7164 (idx 40)
[ 37.963269] tveeprom 0-0000: has radio
[ 37.963270] saa7164[0]: Hauppauge eeprom: model=89619
[ 38.059508] tda18271 1-0060: creating new instance
[ 38.063981] TDA18271HD/C2 detected @ 1-0060
[ 38.404874] DVB: registering new adapter (saa7164)
[ 38.404876] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN
DVB-T)...
[ 38.433105] tda18271 2-0060: creating new instance
[ 38.437225] TDA18271HD/C2 detected @ 2-0060
[ 38.784613] tda18271: performing RF tracking filter calibration
[ 41.427330] tda18271: RF tracking filter calibration complete
[ 41.427482] DVB: registering new adapter (saa7164)
[ 41.427484] DVB: registering adapter 1 frontend -906461813 (NXP
TDA10048HN DVB-T)...
.......
[ 292.106142] tda10048_firmware_upload: firmware uploaded
[ 292.515795] tda18271: performing RF tracking filter calibration
[ 295.157633] tda18271: RF tracking filter calibration complete
[ 295.366049] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw
)...
[ 295.366052] i2c-adapter i2c-2: firmware: requesting dvb-fe-tda10048-1.0.fw
[ 295.368132] tda10048_firmware_upload: firmware read 24878 bytes.
[ 295.368134] tda10048_firmware_upload: firmware uploading
[ 298.372533] tda10048_firmware_upload: firmware uploaded
[ 371.811330] CE: hpet increasing min_delta_ns to 15000 nsec
Only problem is that I am only seeing channels from one transport.
I have seen that people that are reporting problems with this card
usually have I2C errors in dmesg, which I don't have. The transport
that I can tune, is working flawlessly, with all three channels on
that transport giving a perfect picture and sound.
Here is my initial scanning data. I had to create it myself as I live
in a rural area. I used a known working card to extract this (Dvico
Dual Digital 4 PCI)
# Australia / Goulburn / Rocky Hill
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
# ABC
T 725500000 7MHz 3/4 3/4 QAM64 8k 1/16 NONE
# SBS
T 746500000 7MHz 2/3 2/3 QAM64 8k 1/8 NONE
# WIN
T 767500000 7MHz 3/4 3/4 QAM64 8k 1/16 NONE
# Prime
T 788500000 7MHz 3/4 3/4 QAM64 8k 1/16 NONE
# TEN
T 809500000 7MHz 3/4 3/4 QAM64 8k 1/16 NONE
Here is my channels.conf. Again, this was tuned on my known working
PCI card.
ABC HDTV:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
516:0:672
ABC1
:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
512:650:673
ABC2
:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
513:651:674
ABC1
:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
512:650:675
ABC3
:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
512:650:676
ABC DiG Radio:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
0:690:678
ABC DiG Jazz:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
0:700:679
SBS ONE:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
161:81:849
SBS TWO:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
162:83:850
SBS
3
:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
161:81:851
SBS
4
:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
161:81:852
SBS HD:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
102:103:853
SBS Radio
1
:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
0:201:862
SBS Radio
2
:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
0:202:863
WIN TV Canberra:
767500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:33:36:1
WIN TV HD:
767500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:129:0:10
GO!:
767500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:50:51:2
PRIME Canberra:
788500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
2740:2741:2374
PRIME HD:
788500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
2740:2741:2400
PRIME View
1
:
788500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
2740:2741:2401
PRIME View
2
:
788500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
2740:2741:2402
PRIME View
3
:
788500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
2740:2741:2403
SC10 Canberra:
809500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
353:354:2055
One HD Canberra:
809500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
1711:0:2087
SC Ten:
809500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
353:354:2119
If I tune channel 10, it works perfectly
root@kaylee:~/.tzap# tzap "SC10 Canberra"
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '/root/.tzap/channels.conf'
tuning to 809500000 Hz
video pid 0x0161, audio pid 0x0162
status 00 | signal d7d7 | snr 0059 | ber 0000ffff | unc 00000000 |
status 1f | signal e8e8 | snr 006d | ber 00001a17 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal f9f9 | snr 00a8 | ber 00000154 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal fcfc | snr 00c6 | ber 000000e6 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal fdfd | snr 00d7 | ber 00000146 | unc 00000000 |
FE_HAS_LOCK
But other channels don't work quite as well. This happens on either /
dev/dvb/adapter0 or /dev/dvb/adapter1.
root@kaylee:~/.tzap# vi channels.conf
root@kaylee:~/.tzap# tzap "SBS ONE"
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '/root/.tzap/channels.conf'
tuning to 746500000 Hz
video pid 0x00a1, audio pid 0x0051
status 00 | signal 0f0f | snr 0007 | ber 0000ffff | unc 00000000 |
status 00 | signal d9d9 | snr 0058 | ber 0000ffff | unc 00000000 |
status 00 | signal d8d8 | snr 0056 | ber 0000ffff | unc 00000000 |
status 00 | signal d8d8 | snr 0056 | ber 0000ffff | unc 00000000 |
status 00 | signal dada | snr 0059 | ber 0000ffff | unc 00000000 |
root@kaylee:~/.tzap# tzap "ABC2"
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '/root/.tzap/channels.conf'
tuning to 725500000 Hz
video pid 0x0201, audio pid 0x028b
status 00 | signal 0000 | snr 0005 | ber 0000ffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 0000ffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 0000ffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 0000ffff | unc 00000000 |
root@kaylee:~/.tzap# tzap "PRIME Canberra"
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '/root/.tzap/channels.conf'
tuning to 788500000 Hz
video pid 0x0ab4, audio pid 0x0ab5
status 00 | signal 7c7c | snr 001c | ber 0000ffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 0000ffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 0000ffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 0000ffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 0000ffff | unc 00000000 |
root@kaylee:~/.tzap# tzap "WIN TV Canberra"
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '/root/.tzap/channels.conf'
tuning to 767500000 Hz
video pid 0x0021, audio pid 0x0024
status 00 | signal a9a9 | snr 002e | ber 0000ffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 0000ffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 0000ffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 0000ffff | unc 00000000 |
Any help would be appreciated.
aF
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
