Well, I made it a little farther... I think. I updated v4l-dvb: "hg pull" then updated "hg update" I then ran "make allmodconfig" This is my output: make -C /home/mythbox/Firmware/v4l-dvb/v4l allmodconfig make[1]: Entering directory `/home/mythbox/Firmware/v4l-dvb/v4l' ./scripts/make_kconfig.pl /lib/modules/2.6.28-15-generic/build /lib/modules/2.6.28-15-generic/build 1 Preparing to compile for kernel version 2.6.28 ***WARNING:*** You do not have the full kernel sources installed. This does not prevent you from building the v4l-dvb tree if you have the kernel headers, but the full kernel source may be required in order to use make menuconfig / xconfig / qconfig. If you are experiencing problems building the v4l-dvb tree, please try building against a vanilla kernel before reporting a bug. Vanilla kernels are available at http://kernel.org. On most distros, this will compile a newly downloaded kernel: cp /boot/config-`uname -r` <your kernel dir>/.config cd <your kernel dir> make all modules_install install Please see your distro's web site for instructions to build a new kernel. VIDEO_VPSS_SYSTEM: Requires at least kernel 2.6.31 VIDEO_VPFE_CAPTURE: Requires at least kernel 2.6.31 VIDEO_DM6446_CCDC: Requires at least kernel 2.6.31 VIDEO_DM355_CCDC: Requires at least kernel 2.6.31 VIDEO_PXA27x: Requires at least kernel 2.6.29 VIDEO_CX25821: Requires at least kernel 2.6.31 VIDEO_CX25821_ALSA: Requires at least kernel 2.6.31 Created default (all yes) .config file ./scripts/fix_kconfig.pl make[1]: Leaving directory `/home/mythbox/Firmware/v4l-dvb/v4l' Then I made it here: CC [M] /home/mythbox/Firmware/v4l-dvb/v4l/videobuf-core.o CC [M] /home/mythbox/Firmware/v4l-dvb/v4l/videobuf-dma-sg.o CC [M] /home/mythbox/Firmware/v4l-dvb/v4l/videobuf-dma-contig.o /home/mythbox/Firmware/v4l-dvb/v4l/videobuf-dma-contig.c: In function 'videobuf_dma_contig_user_get': /home/mythbox/Firmware/v4l-dvb/v4l/videobuf-dma-contig.c:164: error: implicit declaration of function 'follow_pfn' make[3]: *** [/home/mythbox/Firmware/v4l-dvb/v4l/videobuf-dma-contig.o] Error 1 make[2]: *** [_module_/home/mythbox/Firmware/v4l-dvb/v4l] Error 2 make[2]: Leaving directory `/usr/src/linux-headers-2.6.28-15-generic' make[1]: *** [default] Error 2 make[1]: Leaving directory `/home/mythbox/Firmware/v4l-dvb/v4l' make: *** [all] Error 2 Its kinda annoying that a year ago this was super easy... I dont really want to bump up to 2.6.31 seeing it just came out a few days ago. Thanks, Peter On Mon, Sep 14, 2009 at 11:32 AM, Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx> wrote: > Em Mon, 14 Sep 2009 10:18:42 -0500 > "Peter J. Olson" <peterjolson@xxxxxxxxx> escreveu: > >> Hey all, >> >> I have a Mythbuntu 8.10 system w/ a pctv 800i (pci card) and a pctv hd >> stick (800e). Had both running just fine for about 8 months... then >> the stick stopped working. Or rather, it works but wont pick up a >> signal. >> >> I decided I would update my system a little and figure out what broke >> my 800e. I updated my kernel and went to recompile v4l-dvb and got >> this error: >> >> CC [M] /home/mythbox/Firmware/v4l-dvb/v4l/snd-go7007.o >> >> /home/mythbox/Firmware/v4l-dvb/v4l/snd-go7007.c: In function 'go7007_snd_init': >> >> /home/mythbox/Firmware/v4l-dvb/v4l/snd-go7007.c:251: error: implicit >> declaration of function 'snd_card_create' >> >> make[3]: *** [/home/mythbox/Firmware/v4l-dvb/v4l/snd-go7007.o] Error 1 >> >> make[2]: *** [_module_/home/mythbox/Firmware/v4l-dvb/v4l] Error 2 >> >> make[2]: Leaving directory `/usr/src/linux-headers-2.6.28-15-generic' >> >> make[1]: *** [default] Error 2 >> >> make[1]: Leaving directory `/home/mythbox/Firmware/v4l-dvb/v4l' >> >> make: *** [all] Error 2 >> >> I was using the old copy of v4l I had so I thought it might have been >> the new kernel fighting w/ the old v4l. So I updated v4l (did a pull >> via hg)... same error. >> >> I dinked w/ it for a long time and finally gave up and upgraded to >> 9.0.4. Same error, now neither of my cards will work (brutal!) My >> 800i is acting like the 800e was. I can see the card in mythbackend >> setup but always gets no signal in mythtv. >> >> I dont even know what the snd-go7007 would go with... I dont even have >> that type of hardware (i dont think). >> >> Anyone have any ideas? > > Probably, it is incompatible with your kernel version. Just update and do a > "make allmodconfig". Then, try to compile again. I've disabled by the default > the compilation of the staging drivers. >> >> Thanks, >> Peter >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-media" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > > Cheers, > Mauro > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
