hermann pitton <hermann-pitton <at> arcor.de> writes: > If it seems to deliver stable results now, you can even try to re-flash > it with rewrite_eeprom.pl in v4l2-apps/util. Read the instructions on > top of it. With 2.6.30 it's stable. I've reflashed the eeprom and now the card is autodetected: saa7130/34: v4l2 driver version 0.2.15 loaded saa7133[0]: found at 0000:01:02.0, rev: 209, irq: 22, latency: 32, mmio: 0xcfddf800 saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected] saa7133[0]: board init: gpio is 600e000 IRQ 22/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2e 15 13 ff ff saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2 saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 03 c5 e8 9d saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff i2c-adapter i2c-0: Invalid 7-bit address 0x7a tuner 0-004b: chip found @ 0x96 (saa7133[0]) tda829x 0-004b: setting tuner address to 61 tda829x 0-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 dvb_init() allocating 1 frontend DVB: registering new adapter (saa7133[0]) DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 29 -- ok However it works still only with Kaffeine and w_scan. dvbscan (last mercurial) give: Unable to query frontend status And with 2.6.31 (same configuration) appears this new error: i2c-adapter i2c-0: Invalid 7-bit address 0x7a It can be a problem? > Cheers, > Hermann Thank you! -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
