I have the same problem as Seth. My system will tune RF channel 85 and
below will not tune RF channel 91 and above on the second tuner only.
First tuner works fine on all channels as does the PC HDTV 5500 also in
the system. My normal configuration is a 4-way splitter from the cable
into the house. One leg goes to a 2-way that feeds the two cards in the
system. With this configuration the normal result is:
Frontend /dev/dvb/adapter2/frontend0 tuned in 1 seconds.
Channel 80: Standard=ATSC, Modulation=QAM_256
SNR=0X0172, SIGNAL=0X0172
for channel 80 and:
Unable to set frontend /dev/dvb/adapter2/frontend0:frequency=669000000,
modulation=QAM_256
for channel 103.
After reading Steven Toth's reply I tried adding 1 and then 2 2-way
splitters before the 2250 input. No joy. I also tried feeding the cable
directly into the 2250 with no splitters. Again - no joy.
Any other ideas?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
