Hi, manio wrote: > manio wrote: > > > Hello > > I am using Technotrend Rev1.3 for many years. But last time > > suddenly i find out strange problem. Seems that in some > > circumstances the card can't decode stream from satellite properly. > > I don't know for sure but it could be a driver problem, firmware > > or even (worse) a hardware problem. > > Now i can reply myself to provide info for users with similar problem. > > The parameter which i need is: > hw_sections=1 > When i load dvb_ttpci module with this parameter the stream is correct. > Just by the way: people on DVBN forum has similar issues, but this > parameter was not sufficient - they also need to write a patch for > select pid ranges for providers (in their case: BEV and DN) > More info on dvbn topics#: 42822 and 42653 If you have very good soldering skills, there is the ultimate solution for all kinds of stream corruption with full-featured cards: http://www.escape-edv.de/endriss/dvb-full-ts-mod/ CU Oliver -- ---------------------------------------------------------------- VDR Remote Plugin 0.4.0: http://www.escape-edv.de/endriss/vdr/ 4 MByte Mod: http://www.escape-edv.de/endriss/dvb-mem-mod/ Full-TS Mod: http://www.escape-edv.de/endriss/dvb-full-ts-mod/ ---------------------------------------------------------------- -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
