Hi Hermann, the card works fine on win2000 on another pc. The pc with linux installed is a pentium 3 800 mhz with RAM 256 MB: I don't think it's a resources problem because when I launch channels scan ram used is always at 70 MB and CPU is at 25%. The card becomes warm after the use, but not hot. What dou You think about errors in compiling v4l-dvb? And from output of dmesg | grep saa do You think the card has benn well detected or there is something wrong? Thanks a lot for any suggetsion. ---------- Initial Header ----------- >From : "hermann pitton" hermann-pitton@xxxxxxxx To : "Francesco Marangoni" fmarangoni@xxxxxxxxx Cc : "linux-media" linux-media@xxxxxxxxxxxxxxx Date : Tue, 04 Aug 2009 02:21:38 +0200 Subject : Re: Issue with LifeView FlyDVB-T Duo CardBus. > Hi Francesco, > > Am Montag, den 03.08.2009, 23:49 +0200 schrieb Francesco Marangoni: > > Dear sirs, > > > > I'm not able to make my pcmcia LifeView DVB-T Duo Cardbus working on Ununtu 8.04 LTS kernel 2.6.24.24. > > > > The card seems to be detected but the DVB channel detection fails (using Kaffeine too). > > > > Here the output of some commands: Can Youhelp me? > > > > francesco@ubuntu:~$ lspci > > 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) > > 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) > > 00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) > > 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) > > 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) > > 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) > > 00:0a.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller > > 00:0a.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller > > 00:0b.0 Ethernet controller: 3Com Corporation 3c556 Hurricane CardBus [Cyclone] (rev 10) > > 00:0b.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem (rev 10) > > 00:0d.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator > > 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) > > 02:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0) > > > > francesco@ubuntu:~$ dmesg | grep saa | more > > [ 46.176353] saa7130/34: v4l2 driver version 0.2.14 loaded > > [ 46.176618] saa7133[0]: quirk: PCIPCI_NATOMA > > [ 46.176628] saa7133[0]: found at 0000:02:00.0, rev: 208, irq: 10, latency: 0, mmio: 0x24000000 > > [ 46.176653] saa7133[0]: subsystem: 5168:0502, board: LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus [card=60,insmod option] > > [ 46.176681] saa7133[0]: board init: gpio is 8210000 > > [ 46.280562] saa7133[0]: i2c eeprom 00: 68 51 02 05 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > > [ 46.280587] saa7133[0]: i2c eeprom 10: 00 ff 22 0f ff 20 ff ff ff ff ff ff ff ff ff ff > > [ 46.280607] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 aa ff ff ff ff > > [ 46.280627] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [ 46.280646] saa7133[0]: i2c eeprom 40: ff 25 00 c0 ff 10 07 01 c2 96 00 16 22 15 ff ff > > [ 46.280665] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [ 46.280685] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [ 46.280704] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [ 46.321890] saa7133[0]: registered device video0 [v4l2] > > [ 46.321945] saa7133[0]: registered device vbi0 > > [ 46.321996] saa7133[0]: registered device radio0 > > [ 46.609615] saa7133[0]/dvb: no tda827x tuner found at addr: 60 > > [ 46.609624] DVB: registering new adapter (saa7133[0]) > > [ 238.981774] saa7133[0]: dsp access error > > [ 238.981801] saa7133[0]: dsp access error > > [ 238.981820] saa7133[0]: dsp access error > > [ 238.981824] saa7133[0]: dsp access error > > [ 238.981837] saa7133[0]: dsp access error > > [ 238.981841] saa7133[0]: dsp access error > > [ 238.981854] saa7133[0]: dsp access error > > [ 238.981858] saa7133[0]: dsp access error > > [ 238.981871] saa7133[0]: dsp access error > > [ 238.981875] saa7133[0]: dsp access error > > [ 238.981887] saa7133[0]: dsp access error > > [ 238.981892] saa7133[0]: dsp access error > > [ 238.981904] saa7133[0]: dsp access error > > [ 238.981909] saa7133[0]: dsp access error > > [ 238.981921] saa7133[0]: dsp access error > > [ 238.981926] saa7133[0]: dsp access error > > [ 238.981938] saa7133[0]: dsp access error > > [ 238.981942] saa7133[0]: dsp access error > > [ 238.981955] saa7133[0]: dsp access error > > [ 238.981959] saa7133[0]: dsp access error > > [ 238.981972] saa7133[0]/irq[10,76507]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INT > > .... > > [ 238.993258] saa7133[0]: dsp access error > > [ 238.993263] saa7133[0]: dsp access error > > [ 238.993275] saa7133[0]: dsp access error > > [ 238.993280] saa7133[0]: dsp access error > > [ 238.993292] saa7133[0]: dsp access error > > [ 238.993297] saa7133[0]: dsp access error > > [ 238.993309] saa7133[0]: dsp access error > > [ 238.993314] saa7133[0]: dsp access error > > [ 238.993326] saa7133[0]: dsp access error > > [ 238.993330] saa7133[0]: dsp access error > > [ 238.993343] saa7133[0]: dsp access error > > [ 238.993347] saa7133[0]: dsp access error > > [ 238.993359] saa7133[0]/irq[10,76514]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INT > > L FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15 > > [ 238.993385] saa7133[0]/irq: looping -- clearing PE (parity error!) enable bit > > [ 640.875510] saa7133[0]: quirk: PCIPCI_NATOMA > > [ 640.875520] saa7133[0]: found at 0000:02:00.0, rev: 208, irq: 10, latency: 0, mmio: 0x24000000 > > [ 640.875544] saa7133[0]: subsystem: 5168:0502, board: LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus [card=60,insmod option] > > [ 640.875577] saa7133[0]: board init: gpio is 8210000 > > [ 641.010947] saa7133[0]: i2c eeprom 00: 68 51 02 05 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > > [ 641.010978] saa7133[0]: i2c eeprom 10: 00 ff 22 0f ff 20 ff ff ff ff ff ff ff ff ff ff > > [ 641.010997] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 aa ff ff ff ff > > [ 641.011016] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [ 641.011034] saa7133[0]: i2c eeprom 40: ff 25 00 c0 ff 10 07 01 c2 96 00 16 22 15 ff ff > > [ 641.011052] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [ 641.011070] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [ 641.011088] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [ 641.108271] saa7133[0]: registered device video0 [v4l2] > > [ 641.108329] saa7133[0]: registered device vbi0 > > [ 641.108378] saa7133[0]: registered device radio0 > > [ 641.492916] saa7133[0]/dvb: no tda827x tuner found at addr: 60 > > [ 641.492925] DVB: registering new adapter (saa7133[0]) > > > > > > I did all is described in http://www.linuxtv.org/repo/ but this is the output of Make and Make install: > > > > francesco@ubuntu:~/v4l-dvb$ make > > make -C /home/francesco/v4l-dvb/v4l > > make[1]: Entering directory `/home/francesco/v4l-dvb/v4l' > > Updating/Creating .config > > Preparing to compile for kernel version 2.6.24 > > File not found: /lib/modules/2.6.24-24-generic/build/.config at ./scripts/make_kconfig.pl line 32, <IN> line 4. > > make[1]: *** No rule to make target `.myconfig', needed by `config-compat.h'. Stop. > > make[1]: Leaving directory `/home/francesco/v4l-dvb/v4l' > > make: *** [all] Error 2 > > > > francesco@ubuntu:~/v4l-dvb$ make install > > make -C /home/francesco/v4l-dvb/v4l install > > make[1]: Entering directory `/home/francesco/v4l-dvb/v4l' > > -e > > Removing obsolete files from /lib/modules/2.6.24-24-generic/kernel/drivers/media/video: > > > > -e > > Removing obsolete files from /lib/modules/2.6.24-24-generic/kernel/drivers/media/dvb/cinergyT2: > > > > -e > > Removing obsolete files from /lib/modules/2.6.24-24-generic/kernel/drivers/media/dvb/frontends: > > > > > > Hmm... distro kernel with a non-standard place for module backports detected. > > Please always prefer to use vanilla upstream kernel with V4L/DVB > > I'll try to remove old/obsolete LUM files from /lib/modules/2.6.24-24-generic/ubuntu/media: > > Installing kernel modules under /lib/modules/2.6.24-24-generic/kernel/drivers/media/: > > /sbin/depmod -a 2.6.24-24-generic > > FATAL: Could not open /lib/modules/2.6.24-24-generic/modules.dep.temp for writing: Permission denied > > make[1]: *** [media-install] Error 1 > > make[1]: Leaving directory `/home/francesco/v4l-dvb/v4l' > > make: *** [install] Error 2 > > francesco@ubuntu:~/v4l-dvb$ > > > > Any suggestions? > > > > Thanks. > > did it ever work for you or does it still on something? > > First impression is, that the tuner chip melt down. > > If the card was in for while, with the driver loaded, is it still very > hot close to the antenna connector, if ejected then? > > The first generations of the tuner chips have been good enough to fry > eggs on them. > > Cheers, > Hermann > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
