Hi,
I use two Cinergy 1200 DVB-C MK3 for quite a long time and had no
problems so far. Now I switched to a new mainboard (Asus m4n78 pro) and
after some time, the dvb-c cards aren't usable anymore. This can be
triggered by heavy IO.
On both mainboards I use Ubuntu 9.04 with the same kernel version
(2.6.28-13-generic, also tested with 2.6.28-14-server). While running
vdr I see the following in syslog:
Jul 11 12:29:52 bowser vdr: [4678] frontend 0 lost lock on channel 6, tp 121
Jul 11 12:29:52 bowser kernel: [ 1235.601266] DVB: TDA10023(0):
tda10023_readreg: readreg error (reg == 0x11, ret == -1)
Jul 11 12:29:52 bowser vdr: [4682] frontend 1 lost lock on channel 40,
tp 730
Jul 11 12:29:52 bowser kernel: [ 1235.631263] DVB: TDA10023(1):
tda10023_readreg: readreg error (reg == 0x11, ret == -1)
Jul 11 12:29:52 bowser kernel: [ 1235.701265] DVB: TDA10023(0):
tda10023_readreg: readreg error (reg == 0x11, ret == -1)
Jul 11 12:29:52 bowser kernel: [ 1235.741264] DVB: TDA10023(1):
tda10023_readreg: readreg error (reg == 0x11, ret == -1)
Jul 11 12:29:52 bowser kernel: [ 1235.801262] tda10023: lock tuner fails
Jul 11 12:29:52 bowser kernel: [ 1235.851263] DVB: TDA10023(1):
tda10023_readreg: readreg error (reg == 0x11, ret == -1)
Jul 11 12:29:52 bowser kernel: [ 1235.951264] DVB: TDA10023(1):
tda10023_readreg: readreg error (reg == 0x11, ret == -1)
Jul 11 12:29:52 bowser kernel: [ 1236.001263] tda10023: unlock tuner fails
Jul 11 12:29:52 bowser kernel: [ 1236.051271] tda10023: lock tuner fails
Jul 11 12:29:52 bowser kernel: [ 1236.101271] DVB: TDA10023(0):
tda10023_readreg: readreg error (reg == 0x03, ret == -1)
Jul 11 12:29:53 bowser kernel: [ 1236.200557] DVB: TDA10023(0):
tda10023_writereg, writereg error (reg == 0x03, val == 0x00, ret == -1)
Using lspci I see the following:
01:05.0 Multimedia controller: Philips Semiconductors SAA7146 (rev ff)
(prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: budget_av
01:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev ff)
(prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: budget_av
Before the problem the lspci output looked like this:
01:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: TERRATEC Electronic GmbH Device 1176
Flags: bus master, medium devsel, latency 32, IRQ 16
Memory at faeffc00 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_av
Kernel modules: budget-av
01:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: TERRATEC Electronic GmbH Device 1176
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at faeff800 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_av
Kernel modules: budget-av
Searching on google I found something about adjusting pci-latencies to
64, I already tried that, but it didn't help. I updated the BIOS to the
latest version, but that didn't help either.
Any ideas?
Matthias
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
