[PATCH 2/2] [Resend] cx23885: add card Magic-Pro ProHDTV Extreme 2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



cx23885: add card Magic-Pro  ProHDTV Extreme 2 PCI-E.

Signed-off-by: David T.L. Wong <davidtlwong@xxxxxxxxx>
diff -r a92510aad9e2 -r 7195cfbca974 linux/drivers/media/video/cx23885/cx23885-cards.c
--- a/linux/drivers/media/video/cx23885/cx23885-cards.c	Thu Jun 11 19:07:15 2009 +0800
+++ b/linux/drivers/media/video/cx23885/cx23885-cards.c	Thu Jun 11 20:04:04 2009 +0800
@@ -202,6 +202,10 @@
 		.name		= "Mygica X8506 DMB-TH",
 		.portb		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_MAGICPRO_PROHDTVE2] = {
+		.name		= "Magic-Pro ProHDTV Extreme 2",
+		.portb		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -325,6 +329,10 @@
 		.subvendor = 0x14f1,
 		.subdevice = 0x8651,
 		.card      = CX23885_BOARD_MYGICA_X8506,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8657,
+		.card      = CX23885_BOARD_MAGICPRO_PROHDTVE2,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -716,8 +724,9 @@
 		cx23885_gpio_set(dev, GPIO_9);
 		break;
 	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
 		/* GPIO-1 reset XC5000 */
-		/* GPIO-2 reset LGS8GL5 */
+		/* GPIO-2 reset LGS8GL5 / LGS8G75 */
 		cx_set(GP0_IO, 0x00060000);
 		cx_clear(GP0_IO, 0x00000006);
 		mdelay(100);
@@ -828,6 +837,7 @@
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
 	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
 		ts1->gen_ctrl_val  = 0x5; /* Parallel */
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
diff -r a92510aad9e2 -r 7195cfbca974 linux/drivers/media/video/cx23885/cx23885-dvb.c
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c	Thu Jun 11 19:07:15 2009 +0800
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c	Thu Jun 11 20:04:04 2009 +0800
@@ -441,6 +441,26 @@
 	.if_khz = 5380,
 };
 
+static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
+	.prod = LGS8GXX_PROD_LGS8G75,
+	.demod_address = 0x19,
+	.serial_ts = 0,
+	.ts_clk_pol = 1,
+	.ts_clk_gated = 1,
+	.if_clk_freq = 30400, /* 30.4 MHz */
+	.if_freq = 6500, /* 6.50 MHz */
+	.if_neg_center = 1,
+	.ext_adc = 0,
+	.adc_signed = 1,
+	.adc_vpp = 2, /* 1.6 Vpp */
+	.if_neg_edge = 1,
+};
+
+static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
+	.i2c_address = 0x61,
+	.if_khz = 6500,
+};
+
 static int dvb_register(struct cx23885_tsport *port)
 {
 	struct cx23885_dev *dev = port->dev;
@@ -779,6 +799,19 @@
 				&mygica_x8506_xc5000_config);
 		}
 		break;
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+			&magicpro_prohdtve2_lgs8g75_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(xc5000_attach,
+				fe0->dvb.frontend,
+				&i2c_bus2->i2c_adap,
+				&magicpro_prohdtve2_xc5000_config);
+		}
+		break;
 	default:
 		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
 			" isn't supported yet\n",
diff -r a92510aad9e2 -r 7195cfbca974 linux/drivers/media/video/cx23885/cx23885.h
--- a/linux/drivers/media/video/cx23885/cx23885.h	Thu Jun 11 19:07:15 2009 +0800
+++ b/linux/drivers/media/video/cx23885/cx23885.h	Thu Jun 11 20:04:04 2009 +0800
@@ -77,6 +77,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1255        20
 #define CX23885_BOARD_HAUPPAUGE_HVR1210        21
 #define CX23885_BOARD_MYGICA_X8506             22
+#define CX23885_BOARD_MAGICPRO_PROHDTVE2       23
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux