Thomas Kernen wrote:
Thomas Kernen wrote:
Hello to all,
I'm currently testing a TT-S1500 budget card with the TT budget CI
adapter with vl4 tree and kernel 2.6.28.
When I modprobe budget_ci, the CI adapter seems to be detected but not
registered in /dev/dvb/adapter3/ca0 as I would have expected it to be.
Instead I see the following output:
[ 148.664846] input: Budget-CI dvb ir receiver saa7146 (0) as
/devices/pci0000:00/0000:00:1e.0/0000:11:09.0/input/input5
Any suggestions/ideas what the cause may be and how I can attempt to
solve this?
Thanks
Thomas
--
And I realised I cut and pasted the wrong line: I was expecting to see
"budget_ci: CI interface initialised" after the other line but nothing
of the like did appear. Nor any line indicating an error.
As one can see from the lspci the drivers claim to be in use:
11:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Device 1017
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 123 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0220000 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_ci dvb
Kernel modules: budget-ci
Am I missing a point here? I can't find anything that addresses this in
the LinuxTV wiki or in the archives of the mailing list.
It would appear that I enjoy speaking to myself on this mailer ;-)
Anyway, good news is that the issue had to do with a defective cable
that was bridging the Budget CI and the TT S-1500. It is now functional
and descrambles the Viaccess streams I needed to test against.
Later today I will update the wiki pages with the details of my setup:
[ 8.850659] saa7146: register extension 'budget_ci dvb'.
[ 8.850678] budget_ci dvb 0000:11:08.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 8.850695] saa7146: found saa7146 @ mem ffffc20001198000 (revision
1, irq 22) (0x13c2,0x1017).
[ 8.850698] saa7146 (0): dma buffer size 192512
[ 8.850700] DVB: registering new adapter (TT-Budget/S-1500 PCI)
[ 8.910869] adapter has MAC addr = 00:d0:5c:64:c2:55
[ 8.911046] input: Budget-CI dvb ir receiver saa7146 (0) as
/devices/pci0000:00/0000:00:1e.0/0000:11:08.0/input/input4
[ 8.972616] budget_ci: CI interface initialised
[ 9.335816] LNBx2x attached on addr=8DVB: registering adapter 0
frontend 0 (ST STV0299 DVB-S)...
[ 9.340535] dvb_ca adapter 0: DVB CAM detected and initialised
successfully
CAM Application type: 01
CAM Application manufacturer: 02ca
CAM Manufacturer code: 3000
CAM Menu string: PowerCam_HD V2.0.4
Hopefully this might be useful to others too.
Thomas
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html