Thomas Kernen wrote:
Hello to all,
I'm currently testing a TT-S1500 budget card with the TT budget CI
adapter with vl4 tree and kernel 2.6.28.
When I modprobe budget_ci, the CI adapter seems to be detected but not
registered in /dev/dvb/adapter3/ca0 as I would have expected it to be.
Instead I see the following output:
[ 148.664846] input: Budget-CI dvb ir receiver saa7146 (0) as
/devices/pci0000:00/0000:00:1e.0/0000:11:09.0/input/input5
Any suggestions/ideas what the cause may be and how I can attempt to
solve this?
Thanks
Thomas
--
And I realised I cut and pasted the wrong line: I was expecting to see
"budget_ci: CI interface initialised" after the other line but nothing
of the like did appear. Nor any line indicating an error.
As one can see from the lspci the drivers claim to be in use:
11:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Device 1017
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 123 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0220000 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_ci dvb
Kernel modules: budget-ci
Am I missing a point here? I can't find anything that addresses this in
the LinuxTV wiki or in the archives of the mailing list.
Thanks
Thomas
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
