Well now I feel like an idiot. Thanks for pointing that out in my own
code :-)
Still digging through this.
-Mike
On Fri, 12 Jun 2009, Andy Walls wrote:
> On Fri, 2009-06-12 at 15:33 -0500, Mike Isely wrote:
> > I am unable to reproduce the s5h1411 error here.
> >
> > However my HVR-1950 loads the s5h1409 module - NOT s5h1411.ko; I wonder
> > if Hauppauge has changed chips on newer devices and so you're running a
> > different tuner module.
>
> The digital demodulator driver to use is hardcoded in pvrusb2-devattr.c:
>
> static const struct pvr2_dvb_props pvr2_750xx_dvb_props = {
> .frontend_attach = pvr2_s5h1409_attach,
> .tuner_attach = pvr2_tda18271_8295_attach,
> };
>
> static const struct pvr2_dvb_props pvr2_751xx_dvb_props = {
> .frontend_attach = pvr2_s5h1411_attach,
> .tuner_attach = pvr2_tda18271_8295_attach,
> };
> ...
> static const struct pvr2_device_desc pvr2_device_750xx = {
> .description = "WinTV HVR-1950 Model Category 750xx",
> ...
> .dvb_props = &pvr2_750xx_dvb_props,
> #endif
> };
> ...
> static const struct pvr2_device_desc pvr2_device_751xx = {
> .description = "WinTV HVR-1950 Model Category 751xx",
> ...
> .dvb_props = &pvr2_751xx_dvb_props,
> #endif
> };
>
>
> > That would explain the different behavior.
> > Unfortunately it also means it will be very difficult for me to track
> > the problem down here since I don't have that device variant.
>
> If you have more than 1 HVR-1950, maybe one is a 751xx variant.
>
> When I ran into I2C errors often, it was because of PCI bus errors
> screwing up the bit banging. Obviously, that's not the case here.
>
> -Andy
>
> > -Mike
>
>
>
--
Mike Isely
isely @ isely (dot) net
PGP: 03 54 43 4D 75 E5 CC 92 71 16 01 E2 B5 F5 C1 E8
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
