Hello, this is what I figured out. If I am using the newest v4l-hg: 1) make install --> coldboot --> both card works --> coldboot --> just one card works 2) make install --> init 0 (not powering completly off) --> just one card works 3) make install --> init 6 --> both card works Please let me know what informations do you need! Thank you! Tobias Kaminsky On Tuesday 02 June 2009 16:32:43 Tobias Kaminsky wrote: > With a new firmware: > -rw-r--r-- 1 root 24479 2009-06-02 16:09 /lib/firmware/dvb-fe-tda10046.fw > -rw-r--r-- 1 root 24478 2009-06-02 16:09 /lib/firmware/dvb-fe-tda10046.fw- > backup-02-06-09 > > I get FE_HAS_LOCK on both cards, but > > root@finswimmer-desktop:/lib/firmware# tzap -a 1 > "ProSieben(ProSiebenSat.1)" using '/dev/dvb/adapter1/frontend0' and > '/dev/dvb/adapter1/demux0' tuning to 738000000 Hz > video pid 0x0131, audio pid 0x0132 > status 00 | signal 0000 | snr f6f6 | ber 0001fffe | unc 00000000 | > status 1f | signal 0000 | snr f6f6 | ber 0001fffe | unc 00000000 | > FE_HAS_LOCK status 1f | signal 0000 | snr f6f6 | ber 0001fffe | unc > 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr f6f6 | ber 0001fffe | > unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr f6f6 | ber > 0001fffe | unc 00000000 | FE_HAS_LOCK > > "ber" is always the same. Therefore there are no datas in dvr0. > > > Jun 2 16:11:30 finswimmer-desktop root: card0 > > Jun 2 16:11:33 finswimmer-desktop kernel: [ 6540.080006] tda1004x: setting > up plls for 48MHz sampling clock > Jun 2 16:11:33 finswimmer-desktop kernel: [ 6540.364007] tda1004x: found > firmware revision 20 -- ok > > > > Jun 2 16:11:46 finswimmer-desktop root: card1 > > Jun 2 16:11:49 finswimmer-desktop kernel: [ 6556.044007] tda1004x: setting > up plls for 48MHz sampling clock > Jun 2 16:11:49 finswimmer-desktop kernel: [ 6556.712007] tda1004x: found > firmware revision 0 -- invalid > Jun 2 16:11:49 finswimmer-desktop kernel: [ 6556.712015] tda1004x: trying > to boot from eeprom > Jun 2 16:11:52 finswimmer-desktop kernel: [ 6559.080007] tda1004x: found > firmware revision 0 -- invalid > Jun 2 16:11:52 finswimmer-desktop kernel: [ 6559.080013] tda1004x: waiting > for firmware upload... > Jun 2 16:11:52 finswimmer-desktop kernel: [ 6559.080017] firmware: > requesting dvb-fe-tda10046.fw > Jun 2 16:12:06 finswimmer-desktop kernel: [ 6573.524007] tda1004x: found > firmware revision ed -- invalid > Jun 2 16:12:06 finswimmer-desktop kernel: [ 6573.524013] tda1004x: > firmware upload failed > Jun 2 16:12:27 finswimmer-desktop kernel: [ 6594.332007] tda1004x: setting > up plls for 48MHz sampling clock > Jun 2 16:12:29 finswimmer-desktop kernel: [ 6596.616006] tda1004x: found > firmware revision 0 -- invalid > Jun 2 16:12:29 finswimmer-desktop kernel: [ 6596.616012] tda1004x: trying > to boot from eeprom > Jun 2 16:12:31 finswimmer-desktop kernel: [ 6598.984007] tda1004x: found > firmware revision 0 -- invalid > Jun 2 16:12:31 finswimmer-desktop kernel: [ 6598.984014] tda1004x: waiting > for firmware upload... > Jun 2 16:12:31 finswimmer-desktop kernel: [ 6598.984018] firmware: > requesting dvb-fe-tda10046.fw > Jun 2 16:12:46 finswimmer-desktop kernel: [ 6613.424007] tda1004x: found > firmware revision ed -- invalid > Jun 2 16:12:46 finswimmer-desktop kernel: [ 6613.424013] tda1004x: > firmware upload failed > > On Tuesday 02 June 2009 15:57:27 Tobias Kaminsky wrote: > > Hello, > > > > I have two WinTX1110 installed in one PC: > > > > 04:03.0 Multimedia controller: Philips Semiconductors > > SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) > > 04:04.0 Multimedia controller: Philips Semiconductors > > SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) > > > > The first card is working fine. > > But the second fails to load the firmware: > > [ 215.424008] tda1004x: found firmware revision 0 -- invalid > > [ 215.424014] tda1004x: firmware upload failed > > > > I have tried both cards alone in the pc and they are working, but > > together not. > > > > The "first" card says this: > > [ 204.217357] tda1004x: found firmware revision 20 -- ok > > > > So the current status is that only one is working and I do not know what > > I can change. > > > > The Firmware: > > -rw-r--r-- 1 root 24478 2008-10-27 06:33 /lib/firmware/dvb-fe-tda10046.fw > > > > What else informations do you need? > > > > Thank you very much! > > > > Tobias Kaminsky > > > > dmesg: > > [ 12.593302] Linux video capture interface: v2.00 > > [ 12.903476] saa7130/34: v4l2 driver version 0.2.14 loaded > > [ 12.904699] saa7134 0000:04:03.0: PCI INT A -> GSI 16 (level, low) -> > > IRQ 16 > > [ 12.904706] saa7133[0]: found at 0000:04:03.0, rev: 209, irq: 16, > > latency: 32, mmio: 0xfdaff000 > > [ 12.904714] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV- > > HVR1110 DVB-T/Hybrid [card=104,autodetected] > > [ 12.904726] saa7133[0]: board init: gpio is 6400000 > > [ 13.063355] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 > > a9 1c 55 d2 b2 92 > > [ 13.063366] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff > > ff ff ff ff ff ff [ 13.063375] saa7133[0]: i2c eeprom 20: 01 40 01 32 > > 32 01 01 33 88 ff 00 aa ff ff ff ff > > [ 13.063383] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff [ 13.063392] saa7133[0]: i2c eeprom 40: ff 21 00 c2 > > 96 10 03 32 15 60 ff ff ff ff ff ff > > [ 13.063401] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 13.063409] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 13.063418] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 13.063426] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 6f 78 > > 0e f0 73 05 29 00 > > [ 13.063435] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 > > 89 72 07 70 73 09 > > [ 13.063444] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 > > 0e 01 72 0f 03 72 > > [ 13.063452] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 49 00 00 00 > > 00 00 00 00 00 00 > > [ 13.063461] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 13.063469] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 13.063478] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 13.063486] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 13.364324] tuner' 1-004b: chip found @ 0x96 (saa7133[0]) > > [ 13.367371] tveeprom 1-0050: Hauppauge model 67019, rev B4B4, serial# > > 948335 > > [ 13.367375] tveeprom 1-0050: MAC address is 00-0D-FE-0E-78-6F > > [ 13.367378] tveeprom 1-0050: tuner model is Philips 8275A (idx 114, > > type 4) [ 13.367381] tveeprom 1-0050: TV standards PAL(B/G) NTSC(M) > > PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) > > [ 13.367385] tveeprom 1-0050: audio processor is SAA7131 (idx 41) > > [ 13.367387] tveeprom 1-0050: decoder processor is SAA7131 (idx 35) > > [ 13.367390] tveeprom 1-0050: has radio, has IR receiver, has IR > > transmitter [ 13.367392] saa7133[0]: hauppauge eeprom: model=67019 > > [ 13.456094] tda829x 1-004b: setting tuner address to 61 > > [ 13.556076] tda829x 1-004b: type set to tda8290+75a > > [ 17.422485] saa7133[0]: registered device video0 [v4l2] > > [ 17.422789] saa7133[0]: registered device vbi0 > > [ 17.423087] saa7133[0]: registered device radio0 > > [ 17.484044] saa7134 0000:04:04.0: PCI INT A -> GSI 17 (level, low) -> > > IRQ 17 > > [ 17.484052] saa7133[1]: found at 0000:04:04.0, rev: 209, irq: 17, > > latency: 32, mmio: 0xfdafe000 > > [ 17.484060] saa7133[1]: subsystem: 0070:6701, board: Hauppauge WinTV- > > HVR1110 DVB-T/Hybrid [card=104,autodetected] > > [ 17.484072] saa7133[1]: board init: gpio is 6400000 > > [ 17.628082] tuner' 2-004b: chip found @ 0x96 (saa7133[1]) > > [ 17.676014] saa7133[1]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 > > a9 1c 55 d2 b2 92 > > [ 17.676024] saa7133[1]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff > > ff ff ff ff ff ff [ 17.676033] saa7133[1]: i2c eeprom 20: 01 40 01 32 > > 32 01 01 33 88 ff 00 aa ff ff ff ff > > [ 17.676042] saa7133[1]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff [ 17.676051] saa7133[1]: i2c eeprom 40: ff 21 00 c2 > > 96 10 03 32 15 60 ff ff ff ff ff ff > > [ 17.676059] saa7133[1]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 17.676068] saa7133[1]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 17.676077] saa7133[1]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 17.676085] saa7133[1]: i2c eeprom 80: 84 09 00 04 20 77 00 40 59 4b > > 4f f0 73 05 29 00 > > [ 17.676094] saa7133[1]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 > > 89 72 07 70 73 09 > > [ 17.676103] saa7133[1]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 > > 0e 01 72 0f 03 72 > > [ 17.676111] saa7133[1]: i2c eeprom b0: 10 01 72 11 ff 79 4b 00 00 00 > > 00 00 00 00 00 00 > > [ 17.676120] saa7133[1]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 17.676128] saa7133[1]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 17.676137] saa7133[1]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 17.676146] saa7133[1]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 > > [ 17.685388] tveeprom 2-0050: Hauppauge model 67019, rev B4B4, serial# > > 5196633 > > [ 17.685392] tveeprom 2-0050: MAC address is 00-0D-FE-4F-4B-59 > > [ 17.685395] tveeprom 2-0050: tuner model is Philips 8275A (idx 114, > > type 4) [ 17.685398] tveeprom 2-0050: TV standards PAL(B/G) NTSC(M) > > PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) > > [ 17.685402] tveeprom 2-0050: audio processor is SAA7131 (idx 41) > > [ 17.685404] tveeprom 2-0050: decoder processor is SAA7131 (idx 35) > > [ 17.685407] tveeprom 2-0050: has radio, has IR receiver, has IR > > transmitter [ 17.685410] saa7133[1]: hauppauge eeprom: model=67019 > > [ 17.772015] tda829x 2-004b: setting tuner address to 61 > > [ 17.836014] tda829x 2-004b: type set to tda8290+75a > > [ 21.692599] saa7133[1]: registered device video1 [v4l2] > > [ 21.692915] saa7133[1]: registered device vbi1 > > [ 21.693223] saa7133[1]: registered device radio1 > > [ 21.777372] saa7134 ALSA driver for DMA sound loaded > > [ 21.789059] saa7133[0]/alsa: saa7133[0] at 0xfdaff000 irq 16 > > registered as card -2 > > [ 21.789550] saa7133[1]/alsa: saa7133[1] at 0xfdafe000 irq 17 > > registered as card -1 > > [ 21.938693] DVB: registering new adapter (saa7133[0]) > > [ 21.938698] DVB: registering frontend 0 (Philips TDA10046H DVB-T)... > > > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-media" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
